Our numbers

• 879.412 medical devices
• 12.856 producers
• 6.771 categories

List of devices falling within Class ORTHOPAEDIC PROSTHESES, DRILLS, SINGLE-USE - codice: P091303

• "2 IN 1" CANNULATED DRILL DIA. 1.8MM
• "2 IN 1" CANNULATED DRILL DIA. 1.8MM AO
• "2 IN 1" CANNULATED NOT DRILL DIA. 1.
• "2 IN 1" CANNULATED NOT DRILL DIA. 1.
• "2 IN 1" CANNULATED NOT DRILL DIA. 1.8MM AO
• "2 IN 1" CANNULATED NOT DRILL DIA. 1.8MM AO
• "2 IN 1" DRILL DIA. 2.2 / 3.0MM
• "2 IN 1" DRILL DIA. 2.2 / 3.0MM
• "2 IN 1" DRILL DIA. 2.2 / 3.0MM
• "2 IN 1" DRILL DIA. 2.2 / 3.0MM
• -FAST CUT BUR S / S 5.5 X 54MM STRYKER EQUIV. 1608-6-141
• 1.0MM WIRE PASS DRILL BIT
• 1.0MM WIRE PASS DRILL BIT
• 1.2MM 6.0MM X STRAIGHT ROUTER
• 1.3MM WIRE PASS DRILL BIT
• 1.3MM WIRE PASS DRILL BIT
• 1.5 X 107.5MM DRILL, 20MM WORKING LENGTH, STRYKER SHAFT
• 1.5 X 110MM DRILL, 20MM WORKING LENGTH, COLOR DEPTH MARKS
• 1.5MM NEURO (HEAD MATCH) SOFT TOUCH
• 1.5MM NEURO (MATCH HEAD) SOFT TOUCH
• 1.5MM WIRE PASS DRILL BIT
• 1.5MM WIRE PASS DRILL BIT
• 1.6 X 110MM DRILL, 20MM WORKING LENGTH, COLOR DEPTH MARKS
• 1.6 X 115MM DRILL, 35MM WORKING LENGTH, STRYKER SHAFT
• 1.6MM LINDEMANN DRILL BIT
• 1.7MM WIRE PASS DRILL BIT
• 1.7MM WIRE PASS DRILL BIT
• 1.7MN NEURO (HEAD MATCH)
• 1.9 X 110MM DRILL, 20MM WORKING LENGTH, COLOR DEPTH MARKS
• 1.9 X 115MM DRILL, 35MM WORKING LENGTH, STRYKER SHAFT
• 2.0MM NEURO (HEAD MATCH) SOFT TOUCH
• 2.0MM NEURO (MATCH HEAD) SOFT TOUCH
• 2.0MM WIRE PASS DRILL BIT
• 2.0MM WIRE PASS DRILL BIT
• 2.1 SHANNON MM SIDE CUTTING
• 2.2MM LINDEMANN DRILL BIT
• 2.2MM NEURO (HEAD MATCH)
• 2.5MM NEURO (HEAD MATCH) SOFT TOUCH
• 2.5MM NEURO (MATCH HEAD) SOFT TOUCH
• 2.5MM SHANNON SIDE CUTTING
• 3.0MM NEURO (HEAD MATCH)
• 3.0MM NEURO (HEAD MATCH) SOFT TOUCH
• 3.0MM NEURO (MATCH HEAD) SOFT TOUCH
• 3.0MM SHANNON SIDE CUTTING
• 3.2 MM DRILL
• 3.2MM RADIOLUCENT DRILL BIT
• 3.5MM TWIST TIP, QUICK COUPLING
• 3.8MM TWIST DRILL
• 3.8MM TWIST DRILL 11
• 316-0427-SP-02 DRILL 2.7MM CANNULATED, QUICK RELEASE STERILE 2
• 4.0MM NEURO (HEAD MATCH)
• 4.0MM NEURO (HEAD MATCH) SOFT TOUCH
• 4.0MM NEURO (MATCH HEAD) SOFT TOUCH
• 4.2MM RADIOLUCENT DRILL BIT
• 4.5MM RADIOLUCENT DRILL BIT
• 4.8/6.5MM STEP DRILL
• 5.3MM DRILL
• 5.3MM TWIST DRILL
• 8.0 MM DRILL WITH STOP
• ABUTMENTS INSERTER, MACHINE
• ALPS 3.8MM DRILL BIT
• AO
• AO "2 IN 1" DRILL DIA. 2.2 / 3.0MM
• AO "2 IN 1" DRILL DIA. 2.2 / 3.0MM
• ASNIS III DRILL
• ASNIS III DRILL
• ASNIS III TIP DRILL
• ASNIS MICRO, CANNULATED DRILL 2.1 X 93 MM STERILE
• ASNIS MICRO, CANNULATED DRILL TIP 1.7 X 85 MM STERILE
• BIT REDUCTION
• BIT REDUCTION
• BIT REDUCTION
• BIT REDUCTION
• BIT REDUCTION
• BIT REDUCTION
• BIT SHORT 2.0 MM X 157MM
• BIT THREAD
• BIT THREAD
• BIT THREAD
• BONE DRILL 1.1MM
• BONE DRILL 1.3MM
• BONE DRILL 1.5MM
• BONE DRILL 1.8MM
• BONE DRILL 2.0MM
• BONE DRILL 2.5MM
• BONE DRILL 2.7MM
• BONE DRILL 3.2MM
• BONE DRILL 3.5MM
• BUR -FAST CUT S / S 3.2 X 54MM STRYKER EQUIV. 1608-6-149
• BUR-6MM ROUND DIAMOND, LONG
• BUR-6MM ROUND DIAMOND, MEDIUM
• BUR-CARB ROUND 4.5MM, EXTRA LONG
• BUR-FAST CUT S / S 4.0 X 54MM STRYKER EQUIV. 1608-6-151
• BUR-FAST CUT S / S 4.8 X 54MM STRYKER EQUIV. 1608-6-153
• BUR-FAST CUT S / S 5.0 X 54MM STRYKER EQUIV. 1608- 6-153
• BUR-FAST CUT S / S 6.3 X 54MM STRYKER EQUIV. 1608-6-143
• BUR-FAST CUT S / S 7.1 X 54MM STRYKER EQUIV. 1608-6-145
• BUR-POLISHING S / S 1.5 X 54MM STRYKER EQUIV. 1608-6-157
• BUR-ROUND CARB 1.5MM, LONG
• BUR-ROUND CARB 1.5MM, MEDIUM
• BUR-ROUND CARB 1.8MM, MEDIUM
• BUR-ROUND CARB 1MM, LONG
• BUR-ROUND CARB 1MM, MEDIUM
• BUR-ROUND CARB 2.3MM, MEDIUM
• BUR-ROUND CARB 2.4MM, MEDIUM
• BUR-ROUND CARB 2MM, EXTRA LONG
• BUR-ROUND CARB 2MM, LONG
• BUR-ROUND CARB 2MM, MEDIUM
• BUR-ROUND CARB 3MM, EXTRA LONG
• BUR-ROUND CARB 3MM, LONG
• BUR-ROUND CARB 3MM, MEDIUM
• BUR-ROUND CARB 4.5MM, MEDIUM
• BUR-ROUND CARB 4MM, EXTRA LONG
• BUR-ROUND CARB 4MM, LONG
• BUR-ROUND CARB 4MM, MEDIUM
• BUR-ROUND CARB 5MM, EXTRA LONG
• BUR-ROUND CARB 5MM, LONG
• BUR-ROUND CARB 5MM, MEDIUM
• BUR-ROUND CARB 6.5MM, LONG
• BUR-ROUND CARB 6.5MM, MEDIUM
• BUR-ROUND DIAMOND 2MM, EX LONG
• BUR-ROUND DIAMOND 2MM, LONG
• BUR-ROUND DIAMOND 2MM, MEDIUM
• BUR-ROUND DIAMOND 3MM, EX LONG
• BUR-ROUND DIAMOND 3MM, LONG
• BUR-ROUND DIAMOND 4MM, EX LONG
• BUR-ROUND DIAMOND 4MM, LONG
• BUR-ROUND DIAMOND 4MM, MEDIUM
• BUR-ROUND DIAMOND 5MM, EX LONG
• BUR-ROUND DIAMOND 5MM, LONG
• BUR-SIDECUT CARB 1.5MM, LONG
• BUR-SIDECUT CARB 1.5MM, MEDIUM
• BUR-SIDECUT CARB 1.6MM, MEDIUM
• BUR-SIDECUT CARB 1MM, MEDIUM
• BUR-SIDECUT CARB 2MM, LONG
• BUR-SIDECUT CARB 2MM, MEDIUM
• BUR-SIDECUT CARB 4MM, MEDIUM
• BUR-SIDECUT S / S 2.0 X 54MM STRYKER EQUIV. 1608-2-101
• CALIB DRILL BIT
• CANN. DRILL BIT
• CANNULATED 4.8 MM DRILL
• CANNULATED 5MM DRILL
• CUTTER X48 Ø 1.2 MM LENGTH MM ATTACHMENT STRYKER 4
• CUTTER X48 Ø 1.2 MM LENGTH MM CONNECTION DENTAL 4
• CUTTER X50 Ø 1.2 MM LENGTH 6 MM CONNECTION DENTAL
• CUTTER X50 Ø 1.2 MM LENGTH 6 MM SHANK STRYKER
• CUTTER X85 Ø 1.2 MM LENGTH MM CONNECTION TPS 4
• CUTTER X87 Ø 1.2 MM LENGTH 6 MM SHANK TPS
• DENTAL DRILL BIT DIAM. 2.0 X100, WL 41MM
• DISPOSABLE TIPS
• DISTAL CANNULATED TIP - DIAM. 2 MM - MIFS
• DISTAL TIP DRILL 5.5 MM X160 STERILE
• DISTAL TIP DRILL 5.5 MM X300 STERILE
• DISTAL TIP GRADUATED LONG
• DISTAL TIP GRADUATED LONG
• DOLPHIX - DISPOSABLE TIP D.3X165MM
• DRILL
• DRILL
• DRILL
• DRILL
• DRILL
• DRILL
• DRILL
• DRILL
• DRILL
• DRILL
• DRILL - AO QUICK RELEASE 1.1MM DIA X 60MM LONG
• DRILL - AO QUICK RELEASE 1.5MM DIA X 110MM LONG
• DRILL - AO QUICK RELEASE 1.5MM DIA X 85MM LONG
• DRILL - AO QUICK RELEASE 2.0MM DIA X 100MM LONG
• DRILL - AO QUICK RELEASE 2.0MM DIA X 125MM LONG
• DRILL - AO QUICK RELEASE 2.5MM DIA X 110MM LONG
• DRILL - AO QUICK RELEASE 2.5MM DIA X 180MM LONG
• DRILL - AO QUICK RELEASE 2.7MM DIA X 100MM LONG
• DRILL - AO QUICK RELEASE 2.7MM DIA X 125MM LONG
• DRILL - AO QUICK RELEASE 3.2MM DIA X 145MM LONG
• DRILL - AO QUICK RELEASE 3.2MM DIA X 195MM LONG
• DRILL - AO QUICK RELEASE 3.5MM DIA X 110MM LONG
• DRILL - AO QUICK RELEASE 3.5MM DIA X 195MM LONG
• DRILL - AO QUICK RELEASE 4.5MM DIA X 145MM LONG
• DRILL - AO QUICK RELEASE 4.5MM DIA X 195MM LONG
• DRILL - AO QUICK RELEASE 6.0MM DIA X 195MM LONG
• DRILL - CANNULATED 4.5MM DIA X 204MM LONG
• DRILL - PLAIN SHANK 1.5MM DIA X 70MM LONG
• DRILL - PLAIN SHANK 2.0MM DIA X 85MM LONG
• DRILL - PLAIN SHANK 2.5MM DIA X 95MM LONG
• DRILL - PLAIN SHANK 2.7MM DIA X 85MM LONG
• DRILL - PLAIN SHANK 3.2MM DIA X 130MM LONG
• DRILL - PLAIN SHANK 3.2MM DIA X 180MM LONG
• DRILL - PLAIN SHANK 3.5MM DIA X 180MM LONG
• DRILL - PLAIN SHANK 3.5MM DIA X 95MM LONG
• DRILL - PLAIN SHANK 4.0MM DIA X 156MM LONG
• DRILL - PLAIN SHANK 4.5MM DIA X 156MM LONG
• DRILL - PLAIN SHANK 4.5MM DIA X 180MM LONG
• DRILL - PLAIN SHANK 4.8MM DIA X 127MM LONG
• DRILL - PLAIN SHANK 5.0MM DIA X 180MM LONG
• DRILL - STERILE
• DRILL 1.5 MM MEDIA
• DRILL 2.0MM, QUICK RELEASE
• DRILL AO DIAM. 2.0 X105, WL 41MM
• DRILL BIT
• DRILL BIT 2.4MM CANNULATED
• DRILL BIT 5.5 MM X 300 STERILE AO
• DRILL BIT BI-GUIDE
• DRILL BIT MEDIA
• DRILL BIT STERILE
• DRILL BIT STERILE
• DRILL BIT, 2.0, LL41MM
• DRILL BIT, 2.0, LL41MM
• DRILL BITS FOR SINGLE USE
• DRILL CALIBRATED
• DRILL CANN S-CP
• DRILL CANN SCP 3.5X70MM
• DRILL CANNULATED
• DRILL CANNULATED SONICPINS Ø2.4X18 (PIN26MM)
• DRILL CANNULATED Ø 6MM (STERILE)
• DRILL CINGLEBIT - CANNULATED 4.5MM X 204MM LONG
• DRILL DRILL
• DRILL HELICOIDAL
• DRILL RADIOLUCENT 2.0 MM
• DRILL SCREW
• DRILL SCREW
• DRILL STERILE
• DRILL STERILE
• DRILL STRAIGHT MEDIA
• DRILL TIP DIAMETER 4.2 STERILE
• DRILL WIRE PASS
• DRILL, AO
• DRILL, AO SMALL
• DRILL, DRILL RIG
• EPIDRILL CONDYLE ONLY
• EPIDRILL FEMORAL TWIN
• EPIDRILL TROCHLEA ONLY
• EVOS SMALL, HELICOIDAL PTA, 2.0MM, LONG, AO
• EVOS SMALL, PUNTA HELICAL OVERDRILL 3.5MM, SHORT, AO
• EVOS SMALL, PUNTA HELICAL OVERDRILL, 2.7MM, LONG, AO
• EVOS SMALL, PUNTA HELICAL OVERDRILL, 2.7MM, SHORT, AO
• EVOS SMALL, PUNTA HELICAL, 2.0MM, SHORT, AO
• EVOS SMALL, PUNTA HELICAL, 2.5MM, LONG, AO
• EVOS SMALL, PUNTA HELICAL, 2.5MM, SHORT, AO
• EXTRA LONG STRAIGHT BIT 3.1 MM X 19.1 MM
• EXTREME - D.4MM TIP (STERILE)
• EXTREME - PUNTA GRADUATED D.4MM (STERILE)
• FIXED DRILL BIT; SIZE 2.8X16 MM ¿
• FIXED DRILL BIT; SIZE ¿2.3X12 MM
• FIXED DRILL BIT; SIZE ¿2.3X12 MM 118¿ TIP
• FIXED DRILL BIT; SIZE ¿2.3X14 MM
• FIXED DRILL BIT; SIZE ¿2.3X14 MM 118¿ TIP
• FIXED DRILL BIT; SIZE ¿2.3X16 MM
• FIXED DRILL BIT; SIZE ¿2.3X16 MM 118¿ TIP
• FIXED DRILL BIT; SIZE ¿2.8X12 MM
• FIXED DRILL BIT; ¿SIZE 2.8X14 MM
• F¿HRUNGSDRAHTBOHRER, D = 2.5MM, L = 400MM
• GAMMA3 DRILL BIT 4.2 X 300MM DISTAL SCREWS
• GAMMA3 TIP DRILL
• GAMMA3 TIP DRILL SCREW 4.2 X 300MM DISTAL
• GOES WIRE 1.5 MM DRILL
• GUIDE FOR DRILLING TWINLOOP FLEX
• GUIDE PIN, DRILLING TIP
• GUIDE WIRE, 2.2MM X 28IN.
• INBONE DRILL 6MM STERILE
• INBONE SCREW, BONE REMOVER
• JET-X 3.5 MM DRILL
• JET-X 3.5 MM DRILL GRADUATED CANNULATED
• JET-X 5 MM DRILL
• JET-X DRILL
• LINDEMANN DRILL 1.5MM X 68MM STRYKER EQUIV. 1608-2-43
• LINDEMANN DRILL 1.5MM, LONG
• LINDEMANN DRILL 1.5MM, MEDIUM
• LONG DRILL REAMER 12.6X10.4 MM
• LONG STRAIGHT TIP 3.1X19.1 MM
• MICA TIPS FOR MINI-INVASIVE SURGERY OF THE FOOT
• MICRO TIP
• MICRO TIP
• MILL / DRILL FOR Ø2MM CANNULATED GUIDEWIRE Ø0.8MM DISPOSABLE
• MILL / DRILL Ø2MM CANNULATED WIRE GUIDE Ø0.8MM DISPOSABLE PACK OF 3PCS.
• MILL STERILE
• NEURO DIAMOND BIT 3.0X3.8 MM SHORT
• NEURO DIAMOND DRILL 3MM X 3.8 MM LONG
• NEURO MEDIA PUNTA
• NEURO PUNTA DIAMANTATA1.8 X 2.4 MM LONG
• NEURO PUNTA DIAMANTATA1.8 X 2.4 MM MEDIA
• NEURO TIP SOFT TOUCH 3.0MM
• NON-ADJUSTABLE STEP DRILL
• OMNI - 2.5 MM CANNULATED DRILL
• OMNI - 2.5 MM SOLID DRILL WITH STOP
• OMNI - DRILL BIT FOR 2.8 SCREW
• OMNI - DRILL BIT FOR 3.5 SCREW
• OMNI - FENESTRATING DRILL
• OMNI - POST DRILL
• PEANUT - DRILL AO
• PERI-LOC TARGETERS DRILL
• PL8 - PUNTA Ø2.5X150MM (STERILE)
• PL8 - Ø1.9X150MM PUNTA (STERILE)
• POINT AVERAGE THREAD
• POINT FOR MASTER ADDG
• POINT GOES WIRE
• POINT MEDIA
• POINT REDUCTION FROM
• POINT SERRATA TAPERED MEDIUM 2.3 MM
• PRECICE - DRILL DRILL
• PROXIMAL CANNULATED TIP - DIAM. 3.2 MM - MIFS
• PUNTA A FORARE CANNULATA
• PUNTA CANNULATED
• PUNTA LINDEMAN 2.2 MM MEDIA
• PUNTA NEURO SHORT
• PUNTA SELF PILOTING 9.5 MM
• RADIOLUCENT DRILL BIT 3.5MM
• RADIOLUCENT DRILL BIT 4.0MM
• RADIOLUCENT PUNTA
• RADIOLUCENT PUNTA
• REAMER
• RECIPROCATING BLADE KIT , DOUBLE SIDED (70.0 X 0.96 X 12.5MM)
• RECOS - SMARTDRIVE
• REUSABLE 1.8MM X 300MM DRILL BIT
• ROUND BUR-CARB 1.2MM
• ROUND BUR-CARB 4.5MM
• ROUND BUR-CARB 4.5MM, LONG
• ROUTER CUTTER LONG SHARP
• S4C C1/C2 PERFORATOR D2, 9MM L363MM
• S4C OCCIPUT PERFORATOR D2, 9MM
• S4C OCCIPUT PERFORATOR D3, 9MM
• S4C PERFORATOR D2, 4MM
• S4C PERFORATOR D2, 9MM
• S4C PERFORATOR D2, C1 4MM P.VITE
• SERRATED BONE DRILL 2.3MM DIA STRYKER EQUIV. 21/2/1608
• SHANNON POINT ELITE
• SHARP POINT ROUTER 2.3X15.9 MM LONG
• SIGMA HP GCK TROCHLEA CUTTING BIT
• SOLID DRILL BIT
• SOLID TWIST DRILL 3.8 MM
• SOLID TWIST DRILL 4.8
• SONIC PIN - DRILL CANNULATED Ø2.4X14 (PIN22MM)
• SONIC PIN - DRILL Ø2.4X14 (PIN22MM)
• SONIC PIN - DRILL Ø2.4X18 (PIN26MM)
• SPEEDGUIDE TM DRILL, AO, DIAMETER 2.0MM X 30MM
• SPEEDGUIDE TM DRILL, AO, DIAMETER 2.0MM X 70MM
• SPEEDGUIDE TM DRILL, AO, DIAMETER 2.6MM X 30MM
• SPEEDGUIDE TM DRILL, AO, DIAMETER 2.6MM X 70MM
• SPIRALBOHRER
• SPIRALBOHRER
• SPIRALBOHRER, KAN¿LIERT, LARGE AO-ANSCHLUSS,
• STEEL DRILL BIT
• STEP DRILL BIT FAST 4.0MM
• STOP BIT WITH
• STOP BIT WITH
• STOP BIT WITH
• STRAIGHT ROUTER BIT
• STRAIGHT TIP 3.0X34.9MM
• STRAIGHT TIP LONG 3.1X19.1 MM
• STRYKER DRILL BIT DIAM 2.0 X100, WL 41MM
• SURESHOT AO LONG POINT
• SURESHOT HUMERAL PUNTA 3.2
• SURESHOT PUNTA AO SHORT
• SYNTHES ® STYLE TAP
• T'BO FORET - TIP DRILL
• T'BO TRéPHINE - DRILL FOR BONE BIOPSY COAX
• TAPER SHORT 2.3 MM DRILL
• TAPERED TIP ROUTER
• TIP CANNULATED - 3.0 MM DIAMETER
• TIP CANNULATED LONG DIAM MICA 3 MM FOR MINI-INVASIVE SURGERY OF THE FOOT
• TIP CANNULATED MICA DIAM. 2 MM FOR MINI-INVASIVE SURGERY OF THE FOOT
• TIP CANNULATED MICA LONG 90 MM DIAM. 2 MM FOR MINI-INVASIVE SURGERY OF THE FOOT
• TIP CUTTING SHORT 2.3 MM
• TIP DIAMETER DOUBLE CANNULATED
• TIP DRILL 4.2X180MM STERILE AO
• TIP DRILL 5.5 MM X160 STERILE AO
• TIP DRILL CANNULATED STERILE DISPOSABLE
• TIP DRILL DIAMETER 4.2 STERILE
• TIP DRILL Ø 2.0X125MM AO FITTING
• TIP DRILL Ø 2.5X125MM AO FITTING
• TIP DRILL Ø 2.5X180MM AO FITTING
• TIP DRILL Ø 2.5X230MM AO FITTING
• TIP DRILL Ø 2.7X125MM AO FITTING
• TIP DRILL Ø 3.2X145MM AO FITTING
• TIP DRILL Ø 3.2X180MM AO FITTING
• TIP DRILL Ø 3.2X230MM AO FITTING
• TIP DRILL Ø 3.5X125MM AO FITTING
• TIP DRILL Ø 3.5X180MM AO FITTING
• TIP DRILL Ø 4.5X145MM AO FITTING
• TIP DRILL Ø 4.5X180MM AO FITTING
• TIP DRILL, 1.0X90MM, LL22MM, AO
• TIP DRILL, AO, STERILE
• TIP DRILL, AO, STERILE
• TIP FOR HALF PIN CANNULATED
• TIP FOR HALF PIN CANNULATED
• TIP LINDEMAN 2.2 MM SHORT
• TIP LINDEMANN
• TIP NEURO
• TIP NEURO DIAMANTATA.1.8X2. 4 MM SHORT
• TIP NEURO DIAMANTATA.3X3.8 MM MEDIA
• TIP NEURO FOR LONG 2.9X3.8 MM
• TIP NEURO LONG
• TIP REAMER
• TIP REAMER
• TIP REAMER 12.6X10.4 MM
• TIP REAMER 9.5X 10.4 MM SHORT
• TIP REAMER 9.5X10.4 MM
• TIP REAMER 9.5X10.4 MM
• TIP REAMER MEDIA
• TIP REAMER MEDIA 9.5X10.4 MM
• TIP SCREW ROTATION
• TIP SCREW ROTATION
• TIP STRAIGHT
• TIP STRAIGHT
• TIP WITH HOUSING FOR MEASURING
• TIP WITH HOUSING FOR MEASURING
• TIPPED DRILL MINI
• TIPS
• TIPS FOR ATTACK ADDG
• TIPS FOR DRILL
• TOE HELICAL
• TRABECULAR METAL REVERSE SHOULDER SYSTEM DRILL DIAMETER 2,5MM
• TWIST DRILL
• TWIST DRILL
• TWIST DRILL DEPTH
• TWIST DRILL SCP
• VARIAX DRILL, AO
• VLP MINI-MOD ELIC SCOR TIP Ø 1.5MM, MINI QC
• VLP MINI-MOD ELIC TIP Ø 1.1MM, MINI QC
• VLP MINI-MOD TIP COIL
• WIRE DRILL 2.0 PASS STRYKER X 74MM EQUIV. 1608-2-61
• WIRE SHORT PASS DRILL, LATCH TYPE
• WITH STOP MEDIA TIP
• XTRAFIX - DRILL FOR EXTERNAL FIXATORS
• XTRAFIX® SMALL - CUTTERS
• ¿2.3 FIXED DRILL BIT; SIZE 12 MM TIP-118¿
• ¿2.3 FIXED DRILL BIT; SIZE 14 MM TIP-118¿
• ¿2.3 FIXED DRILL BIT; SIZE 16 MM-118¿ TIP