List of devices falling within Class ARTHROSCOPY, SINGLE-USE GUIDEWIRES - codice: K030202
In this list are all medical devices registered by the ministry of health which belong to the class K030202- 0.62'' / 1.57 MM WITH TROCAR TIP GUIDEWIRE
- 1.1 MM GUIDE WIRE INTRODUCER
- 1.3 MM 2.0 MM DRILL BIT FOR SCREW QUICKFIX
- 1.5 MM K-WIRE
- 1.7 MM CANNULATED DRILL BIT
- 1.7 MM K-WIRE, OPEN EYELET
- 2.0 MM DRILL FOR NESTING GUIDE FOR HUMERAL SUTUREPLATE
- 2.2 MM STOP DRILL
- 2.7 MM BIO-COMPRESSION SCREW DRILL BIT
- 2.7 MM CANNUALTED BIO-COMPRESSION SCREW DRILL BIT
- 3D GLENOID CORING REAMER UNIVERS
- 5 MM DRILL FOR TRANSFIX ® II, 3 MM GUIDE PIN
- ALLOGRAFT OATS ® DONOR HARVESTER, 15 MM
- ALLOGRAFT OATS ® DONOR HARVESTER, 18 MM
- ALLOGRAFT OATS ® DONOR HARVESTER, 20 MM
- ALLOGRAFT OATS ® DONOR HARVESTER, 25 MM
- ALLOGRAFT OATS ® DONOR HARVESTER, 30 MM
- ALLOGRAFT OATS ® DONOR HARVESTER, 35 MM
- ANATOEMIC PHALANGEAL PROSTHESIS K -WIRE 2.8 MM
- ARTHREX ® ECLIPSE AND UNIVERS PIN ORIENTATION GUIDES FORRESECTION
- ARTHREX ® ECLIPSE CORING REAMER, LONG
- ARTHREX ® ECLIPSE II HUMERAL HEAD EXTRACTOR AND UNIVERS
- ARTHROEREISIS GUIDE WIRE
- BI-CORTICAL POST-BIO ® DRILL BIT
- BIO-POST ® COUNTERBORE DRILL
- BLUNT NEEDLE FOR PORTAL DILATION SET
- BTB TRANSFIX ® II PIN AND GRAFT PASSING WIRE SET
- CANNULATED CORING REAMER WITH COLLARED PIN, 10 MM
- CANNULATED CORING REAMER WITH COLLARED PIN, 11 MM
- CANNULATED CORING REAMER WITH COLLARED PIN, 12 MM
- CANNULATED CORING REAMER WITH COLLARED PIN, 13 MM
- CANNULATED CORING REAMER WITH COLLARED PIN, 14 MM
- CANNULATED CORING REAMER WITH COLLARED PIN, 7 MM
- CANNULATED CORING REAMER WITH COLLARED PIN, 8 MM
- CANNULATED CORING REAMER WITH COLLARED PIN, 9 MM
- CANNULATED COUNTERSINK , 4.5/6.7 MM SCREW (MINI HUDSON)
- CANNULATED DRILL BIT, 2.0 MM (AO)
- CANNULATED DRILL BIT, 3.0 MM (AO)
- CANNULATED DRILL BIT, 3.0 MM (MINI HUDSON)
- CANNULATED DRILL BIT, 3.5 MM
- CANNULATED DRILL BIT, 4.0 MM (MINI HUDSON)
- CANNULATED DRILL BIT, 4.5 MM (MINI HUDSON)
- CANNULATED DRILL BIT, 6.7 MM (MINI HUDSON)
- CANNULATED DRILL, 10 MM
- CANNULATED DRILL, 11 MM
- CANNULATED DRILL, 12 MM
- CANNULATED DRILL, 15 MM
- CANNULATED DRILL, 16 MM
- CANNULATED DRILL, 2.5 MM
- CANNULATED DRILL, 3.0 MM
- CANNULATED DRILL, 3.5 MM
- CANNULATED DRILL, 4 MM
- CANNULATED DRILL, 4 MM, LONG
- CANNULATED DRILL, 4.5 MM
- CANNULATED DRILL, 5 MM
- CANNULATED DRILL, 5.0 MM
- CANNULATED DRILL, 5.5 MM
- CANNULATED DRILL, 6 MM
- CANNULATED DRILL, 6.0 MM
- CANNULATED DRILL, 6.5 MM
- CANNULATED DRILL, 7 MM
- CANNULATED DRILL, 8 MM
- CANNULATED DRILL, 9 MM
- CANNULATED HEADED REAMER , 6.5 MM
- CANNULATED HEADED REAMER, 10 MM
- CANNULATED HEADED REAMER, 10.5 MM
- CANNULATED HEADED REAMER, 11 MM
- CANNULATED HEADED REAMER, 12 MM
- CANNULATED HEADED REAMER, 13 MM
- CANNULATED HEADED REAMER, 14 MM
- CANNULATED HEADED REAMER, 5 MM
- CANNULATED HEADED REAMER, 5.5 MM
- CANNULATED HEADED REAMER, 6 MM
- CANNULATED HEADED REAMER, 7 MM
- CANNULATED HEADED REAMER, 7.5 MM
- CANNULATED HEADED REAMER, 8 MM
- CANNULATED HEADED REAMER, 8.5 MM
- CANNULATED HEADED REAMER, 9 MM
- CANNULATED HEADED REAMER, 9.5 MM
- CIRCULAR REAMER, MTP, 14 MM
- CIRCULAR REAMER, MTP, 16 MM
- CIRCULAR REAMER, MTP, 18 MM
- CIRCULAR REAMER, MTP, 20 MM
- CIRCULAR REAMER, MTP, 22 MM
- COLLARED PIN FOR 5.0 MM CORING REAMER
- COMPRESSION SCREW CANNULATED DRILL BIT, 22 MM
- COMPRESSION SCREW CANNULATED DRILL BIT, 24 MM
- COMPRESSION SCREW CANNULATED DRILL BIT, 26 MM
- CORACOID DRILL STOP ADAPTER
- CORING REAMER, 5.0 MM DIAMETER, LR 5
- COUNTERSINK , 2.3 MM, AO, LOW PROFILE PLATE AND SCREW SYSTEM
- COUNTERSINK, 3.0 MM (AO)
- DRILL BIT , 2.2 MM
- DRILL BIT, 2.5 MM
- DRILL BIT, CANNULATED, 2.0 MM
- DRILL BIT, CANNULATED, 3.0 MM
- DRILL FOR BI-CORTICAL POST
- DRILL FOR HTO TITANIUM SCREWS
- DRILL FOR LOW PROFILE CANCELLOUS SCREW, LENGTH 25 MM
- DRILL FOR PEAK POWERPLATE SCREWS (AR-134XXT) Ø 4.3 MM
- DRILL FOR TRANSFIX ® II, 5 MM, MM FOR 3 GUIDE PIN, LONG
- DRILL RETROBUTTON II PIN
- DRILL STOP CORACOID
- DRILL TIP GUIDE PIN FOR SEMIFIX, 2.0 MM
- DRILL TIP GUIDE PIN, 1.5 MM
- DRILL TIP GUIDE PIN, 1.5 MM X 310 MM
- DRILL TIP GUIDE PIN, 2.4 MM X 310 MM
- DRILL TIP GUIDE PIN, 2.4 MM X 310 MM, STERILE
- DRILL TIPPED HEADED PIN REAMER, 5.5 MM
- DRILL TIPPED HEADED PIN REAMER, 8 MM
- DRILL W / DEPTH STOP, 2.0 MM , LONG
- DRILL, 2.0 MM FOR HUMERAL SUTUREPLATE SCREW, CANCELLOUS
- DRILL, 2.0 MM MINI BIO SUTURE TAK, ON
- DRILL, 2.5 MM FOR HUMERAL SUTUREPLATE SCREW, CORTICAL
- DRILL, FOR 2.4 MM SUTURETAK ®
- DRILL, FOR 2.4 MM SUTURETAK ®, SPADE TIP
- DRILL, FOR 2.8 MM FASTAK II
- DRILL, FOR 2.9 MM PUSHLOCK ®
- DRILL, FOR 3.0 MM SUTURETAK PEEK ®
- DRILL, FOR 3.0 MM SUTURETAK ®, SPADE TIP
- DRILL, FOR 3.0 MM SUTURETAK ®, SPADE TIP, THICK SHAFT
- DRILL, FOR 3.5 MM PUSHLOCK ® HARD BONE
- DRILL, FOR 3.5 MM PUSHLOCK ®, SPADE TIP
- DRILL, FOR 3.7 MM SUTURETAK ®
- DRILL, FOR 5.5 MM 5.5 MM AND CORKSCREW ® FT SWIVELOCK, SPADE TIP
- DRILL, FOR BIO-SUTURETAK ® WITH NEEDLES, SHORT SPADE TIP
- DRILLS, CANNULATED - IIA, STERILE
- DRIVE SHAFT FOR GLENOID REAMER
- DRIVING WITH WIRE SLOT
- DUAL RETROCUTTER ®, 10 MM
- DUAL RETROCUTTER ®, 10.5 MM
- DUAL RETROCUTTER ®, 11 MM
- DUAL RETROCUTTER ®, 12 MM
- DUAL RETROCUTTER ®, 6 MM
- DUAL RETROCUTTER ®, 6.5 MM
- DUAL RETROCUTTER ®, 7 MM
- DUAL RETROCUTTER ®, 7.5 MM
- DUAL RETROCUTTER ®, 8 MM
- DUAL RETROCUTTER ®, 8.5 MM
- DUAL RETROCUTTER ®, 9 MM
- DUAL RETROCUTTER ®, 9.5 MM
- FIBERWIRE ® TENSIONER
- FIXATION PINS 3D UNIVERS
- FLIPCUTTER, 10 MM
- FLIPCUTTER, 10.5 MM
- FLIPCUTTER, 11 MM
- FLIPCUTTER, 11.5 MM
- FLIPCUTTER, 12 MM
- FLIPCUTTER, 13 MM
- FLIPCUTTER, 6 MM
- FLIPCUTTER, 6.5 MM
- FLIPCUTTER, 7 MM
- FLIPCUTTER, 7.5 MM
- FLIPCUTTER, 8 MM
- FLIPCUTTER, 8.5 MM
- FLIPCUTTER, 9 MM
- FLIPCUTTER, 9.5 MM
- GLENOID DRILL, 6.0 MM
- GLENOID REAMER SHAFT
- GLENOID REAMER W / DRILL HOLES, LARGE
- GLENOID REAMER W / DRILL HOLES, SMALL & MEDIUM
- GLENOID REAMER, LARGE
- GLENOID REAMER, LARGE
- GLENOID REAMER, SMALL
- GLENOID REAMER, SMALL & MEDIUM
- GRADUATED GUIDE PIN SLEEVE FOR 2.4 MM PINS
- GRADUATED GUIDE PIN SLEEVE FOR 2.4 MM PINS
- GRADUATED GUIDE PIN SLEEVE, 50 ° BEVEL
- GRAFT EXTRACTOR FOR CORING REAMER
- GRAFT PASSING WIRE
- GRAFT PREPARATION SUTURE NEEDLE
- GUIDE PIN SLEEVE FOR 1.5 MM PINS
- GUIDE PIN W / SUTURE EYE, 1.7 MM X 35 INCHES
- GUIDE PIN W / SUTURE EYE, 2.4 MM X 43.5 INCHES
- GUIDE PIN W / SUTURE EYE, 2.4 MM X 43.5 INCHES, STERILE
- GUIDE WIRE 3 MM LANCEOLATE TIP
- GUIDE WIRE 4.5 MM FOR TRIM-IT SCREW
- GUIDE WIRE AND DRILLS - CLASS I GMBH
- GUIDE WIRE AND DRILLS - CLASS IIA GMBH STERILE NITINOL
- GUIDE WIRE AND DRILLS - CLASS IIA GMBH STERILE STAINLESS STEEL
- GUIDE WIRE AND DRILLS - CLASS IIA GMBH UNSTERILE
- GUIDE WIRE AND DRILLS - CLASS IIA GMBH UNSTERILE ON
- GUIDE WIRE AND DRILLS - STAINLESS STEEL - INC - STERILE
- GUIDE WIRE AND DRILLS - STAINLESS STEEL - INC - STERILE
- GUIDE WIRE AND DRILLS - STAINLESS STEEL - INC - STERILE EO
- GUIDE WIRE AND DRILLS - STAINLESS STEEL INC. (UNSTERILE, ON)
- GUIDE WIRE AND SLEEVE 2.8
- GUIDE WIRE AND STAINLESS STEEL DRILLS INC UNSTERILE
- GUIDE WIRE CANNU-FLEX, 2 MM X 23 CM
- GUIDE WIRE FOR BIO-COMPRESSION SCREW
- GUIDE WIRE WITH TROCAR TIP, .045'' X 5.91'' (1.1 MM X 150 MM)
- GUIDE WIRE WITH TROCAR TIP, .078'' X 5.91'' (2 MM X 150 MM)
- GUIDE WIRE, .094'' X 8'' (2.4 MM X 200 MM)
- GUIDE WIRE, 1.04, MM (0041) DIAMETER
- GUIDE WIRES, DANEWITZ
- GUIDEWIRE
- GUIDEWIRE
- GUIDEWIRE
- GUIDEWIRE
- GUIDEWIRE
- GUIDEWIRE 2.4
- GUIDEWIRE 2.4
- GUIDEWIRE BIOSURE SYNC
- GUIDEWIRE FOR TIGHTROPE SYNDESMOSIS REPAIR KIT
- GUIDEWIRE GRADUATED FOR TTS
- GUIDEWIRE NITINOL 1.2 MM
- GUIDEWIRE SURETAC 6MM
- GUIDEWIRE, 0.86 MM
- GUIDEWIRE, 1 MM (.039'')
- GUIDEWIRE, THREADED, 1.2 MM X 70 MM
- K-WIRE FOR TRIM-IT SPIN PIN
- K-WIRE WITH BALL, 1.6MM X 15.0 INCHES, ON
- K-WIRE, 1.6MM X 15.0 INCHES, ON
- LOW PROFILE DRILL BIT, 1.7 MM
- LOW PROFILE DRILL BIT, 2.3 MM
- MANUAL INSERTION INSTRUMENTS FOR TRIM-IT DRILL PIN, 1.5 MM
- MANUAL INSERTION INSTRUMENTS FOR TRIM-IT DRILL PIN, 2.0 MM
- MENISCAL ALLOGRAFT SYSTEM DRILL GUIDES
- MINI TIGHTROPE SUTURE PASSING GUIDEPIN 1.1 MM
- MTO GUIDE WIRE LOOP WITH EXTENSION
- NANO FX MICROFRACTURE GUIDE WIRE
- NEEDLE AND THREAD GUIDE FOR HIP
- NITINOL GUIDE PIN FOR BIO-INTERFERENCE SCREWS, 1.1 MM
- NITINOL GUIDE PIN FOR BIO-INTERFERENCE SCREWS, 1.1 MM, STERILE
- NITINOL GUIDE PIN, 1.5 MM, WITH 25 & 30 MM DEPTH MARKINGS
- NITINOL GUIDE PIN, 2.0 MM, MM DEPTH WITH 25 & 30 MARKINGS, STERILE
- NITINOL GUIDE PIN, 2.0 MM, WITH 25 & 30 MM DEPTH MARKINGS
- NITINOL WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- NON-VASCULAR GUIDE WIRES
- OATS ® ALLOGRAFT RECIPIENT HARVESTER, 10.0 MM
- OATS ® ALLOGRAFT RECIPIENT HARVESTER, 12.0 MM
- OATS ® ALLOGRAFT RECIPIENT HARVESTER, 14.0 MM
- OATS ® ALLOGRAFT RECIPIENT HARVESTER, 15.0 MM
- OATS ® ALLOGRAFT RECIPIENT HARVESTER, 18.0 MM
- OATS ® ALLOGRAFT RECIPIENT HARVESTER, 20.0 MM
- OATS ® ALLOGRAFT RECIPIENT HARVESTER, 25.0 MM
- OATS ® ALLOGRAFT RECIPIENT HARVESTER, 30.0 MM
- OATS ® ALLOGRAFT RECIPIENT HARVESTER, 35.0 MM
- OATS ® ALLOGRAFT RECIPIENT HARVESTER, 8.0 MM
- OSTEOTOMY GUIDE PIN, 2.4 MM
- OSTEOTOMY GUIDE PIN, 2.4 MM, BREAKAWAY
- OSTEOTOMY GUIDE PIN, 3.0 MM
- OSTEOTOMY GUIDE PIN, 3.0 MM, BREAKAWAY
- PIN OSTEOTOMY
- PIN TIPPED DRILL HEADED REAMER, 9 MM
- PLUS PROSTOP GUIDE PIN, .054'' DIAMETER
- PORTAL DILATION NEEDLE, ON
- REAMER, METATARSAL MTP PLATE , 16MM
- REAMER, METATARSAL MTP PLATE, 14MM
- REAMER, METATARSAL MTP PLATE, 18MM
- REAMER, METATARSAL MTP PLATE, 20MM
- REAMER, METATARSAL MTP PLATE, 22MM
- REAMER, PHALANGEAL MTP PLATE, 14MM
- REAMER, PHALANGEAL MTP PLATE, 16MM
- REAMER, PHALANGEAL MTP PLATE, 18MM
- REAMER, PHALANGEAL MTP PLATE, 20MM
- REAMER, PHALANGEAL MTP PLATE, 22MM
- RETROBUTTON PIN DRILL WITH 3 MM SWORDS TIP
- RETROCUTTER ®, 10.0 MM
- RETROCUTTER ®, 10.5 MM
- RETROCUTTER ®, 11.0 MM
- RETROCUTTER ®, 12.0 MM
- RETROCUTTER ®, 5.0 MM
- RETROCUTTER ®, 5.5 MM
- RETROCUTTER ®, 6.0 MM
- RETROCUTTER ®, 6.5 MM
- RETROCUTTER ®, 7.0 MM
- RETROCUTTER ®, 7.5 MM
- RETROCUTTER ®, 8.0 MM
- RETROCUTTER ®, 8.5 MM
- RETROCUTTER ®, 9.0 MM
- RETROCUTTER ®, 9.5 MM
- RETRODRILL GUIDE ASSEMBLY, 3MM, CANNULATED
- RETRODRILL GUIDE PIN, 3 MM, NON-CANNULATED
- RETROPASSER
- SHORT GUIDE PIN, 2.4 MM
- STEP DRILL, 2.4 MM (FOR TISSUETAK / BIO-SUTURETAK ®),
- SUTURE PASSING WIRE
- SUTURES PASSING WIRE, 8 LONG, SINGLE USE
- SUTURING NEEDLE NITINOL WIRE WITH LOOP END
- T-BAR FOR ARTHREX ® ECLIPSE CENTERING DEVICE / CORING REAMER
- THREADED FIXATION PINS FOR GRAFT HARVESTING GUIDE, 1 1 LONG & SHORT
- TRANSFIX ® II DRILL PINS AND GRAFT PASSING WIRE SET
- TRANSFIX ® PIN & GRAFT PASSING WIRE SET
- TRANSFIX ® T3 PIN DRILL WITH LASER MARK, 3.0 MM
- TRANSTIBIAL RETRODRILL PIN, 3MM, WITH SUTURE EYE
- TRIM-IT CANNULATED DRILL BIT, 3.4 MM
- TRIM-IT CANNULATED DRILL BIT, 4.5 MM
- TRIM-IT DRILL BIT, 2.0 MM
- TRIM-IT DRILL BIT, 2.4 MM
- TRIM-IT DRILL BIT, 2.6 MM
- TRIM-IT DRILL BIT, 2.7 MM
- TRIM-IT DRILL BIT, 3.5 MM
- TRIM-IT DRILL BIT, 4.0 MM
- UNIVERS 3D CEMENTED GLENOID CORE DRILL, 13 MM
- UNIVERS 3D GLENOID FLEXIBLE CORING REAMER
- UNIVERS 3D HUMERAL FRACTURE DRILL, 10.0 MM
- UNIVERS 3D HUMERAL FRACTURE DRILL, 11.0 MM
- UNIVERS 3D HUMERAL FRACTURE DRILL, 12.0 MM
- UNIVERS 3D HUMERAL FRACTURE DRILL, 13.0 MM
- UNIVERS 3D HUMERAL FRACTURE DRILL, 8.0 MM
- UNIVERS 3D HUMERAL FRACTURE DRILL, 9.0 MM
- UNIVERS 3D PLACEMENT GUIDE FOR FIXATION PINS
- UNIVERS 3D REAMER, 10.0 MM
- UNIVERS 3D REAMER, 11.0 MM
- UNIVERS 3D REAMER, 12.0 MM
- UNIVERS 3D REAMER, 13.0 MM
- UNIVERS 3D REAMER, 14.0 MM
- UNIVERS 3D REAMER, 15.0 MM
- UNIVERS 3D REAMER, 6.0 MM
- UNIVERS 3D REAMER, 7.0 MM
- UNIVERS 3D REAMER, 8.0 MM
- UNIVERS 3D REAMER, 9.0 MM
- UNIVERS II 3D REAMER, 10 MM (HUDSON CONNECT)
- UNIVERS II 3D REAMER, 11 MM (HUDSON CONNECT)
- UNIVERS II 3D REAMER, 12 MM (HUDSON CONNECT)
- UNIVERS II 3D REAMER, 13 MM (HUDSON CONNECT)
- UNIVERS II 3D REAMER, 14 MM (HUDSON CONNECT)
- UNIVERS II 3D REAMER, 15 MM (HUDSON CONNECT)
- UNIVERS II 3D REAMER, 5 MM (HUDSON CONNECT)
- UNIVERS II 3D REAMER, 6 MM (HUDSON CONNECT)
- UNIVERS II 3D REAMER, 7 MM (HUDSON CONNECT)
- UNIVERS II 3D REAMER, 8 MM (HUDSON CONNECT)
- UNIVERS II 3D REAMER, 9 MM (HUDSON CONNECT)
- UNIVERS SHOULDER HEAD RESECTION DISPOSABLE KIT
- WIRE GUIDE
- WIRE GUIDE
- WIRE GUIDE
- WIRE GUIDE
- WIRE GUIDE
- WIRE GUIDE
- WIRE GUIDE
- WIRE GUIDE
- WIRE GUIDE FOR HIP NITINOL
- WIRE GUIDE HAS BIOSURE
- WIRE GUIDE HAS BIOSURE
- WIRE GUIDE TO PUNTA TROCAR
- WIRE HELP NITINOL 1.1 MM X 38.1 CM
- ZEBRA PIN FOR ISOMETRY TESTING, 2.4 MM
- ZEBRA PIN FOR ISOMETRY TESTING, 2.4 MM, STERILE
Medical Devices