List of devices falling within Class ENT PERFORATORS - codice: L149006
In this list are all medical devices registered by the ministry of health which belong to the class L149006- 130 ° KERRISON PUNCH UP, BITE 2 MM
- 2000 INVERNESS
- 3.0 MM AWL OSSIVORO
- 410-300-000
- 90 ° KERRISON PUNCH DOWN BITE 1 MM
- ANKYLOS © - SCALPEL CILINDRICO GS B
- ANKYLOS ® - MUCOTOME ATP
- ANKYLOS ® - MUCOTOME ATP
- ANKYLOS ® - ROUND KNIFE GS
- ANKYLOS ® - ROUND KNIFE GS
- ANKYLOS ® - TIP FOR THE CENTER FOR PUNCH
- ANKYLOS ® - TUBE FOR CUTTING FOR PUNCH
- ANTRUM DOWNW.THROUGHCUT RIGHT SIDE PUNCH
- ANTRUM PUNCH, REVERSIBLE 360 °, 1.5MM BITE
- ANTRUM PUNCH, REVERSIBLE 360 °, 2.5MM BITE
- ANTRUM PUNCH-THROUGH CUTTING, 2 MM WIDE
- ANTRUM PUNCH-THROUGH CUTTING, 3 MM WIDE
- ANTRUM ROTATING PUNCH, 10CM SHAFT
- ANTRUM ROTATING PUNCH, 10CM, PEDIATRIC
- ANTRUM ROTATING PUNCH, DELIC.2X3.5MM BITE
- ANTRUM ROTATING PUNCH, DELIC.2X3.5MM BITE
- ANTRUM SUCTION PUNCH 2.5 MM, BACKW.LEFT
- ANTRUM SUCTION PUNCH 2.5MM, BACKW.RIGHT
- ANTRUM SUCTION PUNCH 2.5MM, UPTURN.BACKW.
- ANTRUM SUCTION PUNCH 4MM, STR.BACKW.LEFT
- ANTRUM SUCTION PUNCH 4MM, STR.BACKW.RIGH
- ANTRUM SUCTION PUNCH 4MM, STR.BACKW.UP
- ANTRUM SUCTION PUNCH 4MM, UPTURN.BACKW.UP
- AWL ARTICULATED 2.0 MM 70 °
- AWL ARTICULATED 3.0 MM 70 °
- AWL ARTICULATED 4.0 MM 70 °
- AWL FOR ENGRAVING CAVERNS 4MM 90 ° UPWARD
- AWL OSSIVORO XOMED 2.0 MM
- BACHERT FRONTAL SINUS PUNCH, SHEATH 70 °
- BACHERT FRONTAL SINUS PUNCH, SHEATH 70 °
- BACHERT FRONTAL SINUS PUNCH, SHEATH 70 °
- BEYER ANTRUM BACKWARD CUTTING PUNCH
- BIOPSY PUNCH LARYNGO, LENGTH 25 CM
- BITING PUNCH FOR RETROGRADE LEFT ANTRO
- BLAKESLEY SUCTION PUNCH 45 ° UPCVD SIZE 1
- BLAKESLEY SUCTION PUNCH 45 ° UPCVD SIZE 2
- BLAKESLEY SUCTION PUNCH 90 ° UPCVD SIZE 2
- BLAKESLEY SUCTION PUNCH, STRAIGHT SIZE 1
- BRONCHO BIOPSY PUNCH, 35CM, 2.5 MM-SH.
- BRONCHO BIOPSY PUNCH, 55CM, 3.0 MM-SH.
- CAVERNS OSTRUM BACKBITER AWL FOR ADULT LEFT
- CLAMP JAW FOR BREAST WITH BITE LEFT SIDE PEDIATRIC
- CLAMP JAW FOR BREAST WITH BITE RIGHT SIDE
- CLAMP PUNCH FOR DENS RIGHT SIDE ENGRAVING
- CLAMP PUNCH FOR ENGRAVING CAVERNS LEFT SIDE
- DIETER MALLEUS NIPPER, PUNCH DOWN, 8CM
- DIETER MALLEUS NIPPER, RIGHT PUNCH, 8CM
- DIETER MALLEUS NIPPER, UPW.PUNCH, 8CM
- DRILLS FOR ENT
- EJECTOR WITH EXTRA STRONG PUNCH
- EJECTOR WITH EXTRA STRONG PUNCH
- EXTRA STRONG PUNCH WITH EJECTOR,
- FENTEX D2 PERFORATORS EAR
- FRIADENT ® - ROUND KNIFE FOR CONTRA
- FRIADENT ® - ROUND KNIFE FOR CONTRA
- FRONTAL SINUS / RECESS PUNCH, 70 ° UPTURNED
- FRONTAL SINUS / RECESS PUNCH, 70 ° UPTURNED
- FRONTAL SINUS PUNCH, 70TH, LARGE
- FS- KERRISON PUNCH, W.LENGTH 18 CM, MM 2
- FS- KERRISON PUNCH, W.LENGTH 18 CM, MM 2
- FS-KERRISON PUNCH, 40 ° UP BITING, 1 MM
- FS-KERRISON PUNCH, 40 ° UP BITING, 2 MM
- FS-KERRISON PUNCH, 40 ° UP BITING, 3MM
- FS-KERRISON PUNCH, 40 ° UP BITING, 4MM
- FS-KERRISON PUNCH, 40 ° UP BITING, 5 MM
- FS-KERRISON PUNCH, 40 ° UP BITING, 6 MM
- FS-KERRISON PUNCH, W.LENGTH 18 CM 3 MM
- FS-KERRISON PUNCH, W.LENGTH 18 CM 3 MM
- FS-KERRISON PUNCH, W.LENGTH 18 CM 4 MM
- FS-KERRISON PUNCH, W.LENGTH 18 CM 4 MM
- FS-KERRISON PUNCH, W.LENGTH 18 CM, 1 MM
- FS-KERRISON PUNCH, W.LENGTH 18 CM, 1 MM
- HAJEK SPHENOID PUNCH 45 ° BACKW.UP, 4X4MM
- HAJEK SPHENOID PUNCH 45'BACKW. 4X4MM DOWN
- HAJEK SPHENOID PUNCH 90 ' CUP C.3.5X 3.5MM
- HAJEK SPHENOID PUNCH 90 ° CUT UP. 4X4 MM
- HAJEK SPHENOID PUNCH 90'DOWN 3.5X3.5MM
- HAJEK SPHENOID PUNCH 90'DOWN CUT.4X4 MM
- HAJEK- KOFLER SPHENOID PUNCH, REVERSIBLE,
- HAJEK-KOFLER SPHENOID PUNCH, WL 14 CM
- HAJEK-KOFLER SPHENOID PUNCH, WL 14 CM
- HAJEK-KOFLER SPHENOID PUNCH, WL 14 CM
- HAJEK-KOFLER SPHENOID PUNCH, WL 14 CM
- HAJEK-KOFLER SPHENOID PUNCH, WL 14 CM
- HANDLE PUNCH
- HEERMANN ETHMOID PUNCH, BACKWARD CUTTING
- KARL STORZ ENT PUNCH
- KARL STORZ ENT PUNCH
- KARL STORZ ENT PUNCH
- KARL STORZ ENT PUNCH
- KARL STORZ ENT PUNCH
- KARL STORZ ENT PUNCH
- KARL STORZ ENT PUNCH
- KARL STORZ PUNCH
- KARL STORZ PUNCH
- KARL STORZ PUNCH, CIRCULAR CUT 120 °, 3.5 MM
- KARL STORZ RONGEUR
- KARL STORZ SILCUT ANTRUM PUNCH
- KARL STORZ SILCUT ANTRUM PUNCH
- KARL STORZ SILCUT STAMMBERGER PUNCH
- KARL STORZ SILCUT STAMMBERGER PUNCH
- KERRISON 90TH PUNCH DOWN BITE 2 MM
- KERRISON 90TH PUNCH DOWN BITE 3 MM
- KERRISON 90TH PUNCH UP, BITE 3 MM
- KERRISON PUNCH 90 ° UP, BITE 2 MM
- KRAUSE LARYNGEAL TIP PUNCH, RECTANGULAR
- LARKIN PENETRATOR 0.8 MM
- LARKIN-HAND 0.8MM PERFORATOR
- LARYNGO BIOPSY PUNCH, 45 ° UPCURVED
- MCKENTY SPHENOID PUNCH, SLENDER PATTERN,
- MELTZER ADENOID PUNCH, SIZE 0 = 6 MM
- MELTZER ADENOID PUNCH, SIZE 1 = 7MM
- MELTZER ADENOID PUNCH, SIZE 2 = 8 MM
- MELTZER ADENOID PUNCH, SIZE 3 = 10 MM
- MELTZER ADENOID PUNCH, SIZE = 0 5MM
- MELTZER ADENOID PUNCH, SIZE = 2 8MM
- MELTZER ADENOID PUNCH, SIZE = 7 1 MM
- MICRO RING NEEDLE WULLSTEIN CRV.DEB.160MM
- NOTCHING CLAMP FOR ANTRO, CURVE TO THE LEFT, BEFORE CUTTING
- NOTCHING CLAMP FOR ANTRO, CURVE TO THE RIGHT, BEFORE CUTTING
- OSTRUM ANTRUM PUNCH, 10 CM WL LEFTSIDE
- OSTRUM ANTRUM PUNCH, 10 CM WL RIGHTS.
- OSTRUM ANTRUM PUNCH, 10CM WL, BITE 1.5MM
- OSTRUM ANTRUM PUNCH, 10CM WL, BITE 1.5MM
- OSTRUM ANTRUM PUNCH, 10CM WL, BITE 1.5MM
- OSTRUM ANTRUM PUNCH, 10CM WL, UPSIDE
- PINZA CON PUNZONE ARTICOLATA MORSO ANGOLATO DI 70° DI 3X4MM, LUNGHEZZA DI LAVORO 140MM
- PINZA CON PUNZONE ARTICOLATA MORSO ANGOLATO DI 70° DI 4X4MM, LUNGHEZZA DI LAVORO 140MM
- PINZA CON PUNZONE ARTICOLATA MORSO ANGOLATO DI 70° RETROVERSO DI 2X4MM, LUNGHEZZA DI LAVORO 140MM
- PUNCH
- PUNCH 2.0MM BEYER ANTRUM, SLENDER,
- PUNCH BEYER EAR ULTRA DELICATE 1MM, 9CM
- PUNCH FOR ADULT CAVERNS OSTRUM BACKBITER
- PUNCH FOR ADULT CAVERNS OSTRUM BACKBITER RIGHT
- PUNCH FOR BACKWARD CAVERNS ENGRAVING 45 °
- PUNCH FOR CUTTING CIRCULAR
- PUNCH FOR ENGRAVING CAVERNS 45TH FORWARD
- PUNCH FOR ENGRAVING CAVERNS 4MM 90 ° DOWN
- PUNCH FRONTAL SINUS, SHEATH 70TH UPCURVED
- PUNCH FRONTAL SINUS, SHEATH 70TH UPCURVED
- PUNCH HAJEK KOFLER-SPHENOID ROTARY
- PUNCH KERRISON 90 ° UP, BITE 1 MM
- PUNCH LEFT SIDE DOWNW.THROUGHCUT ANTRUM
- PUNCH OSTRUM ANTRUM, 13CM, CUTTING BACKW.
- PUNCH OSTRUM ANTRUM, 13CM, CUTTING BACKW.
- PUNCH SUCT.INTEGR.STRAIGHT TAKAHASHI,
- PUNCH TAKAHASHI SUCT.INTEGR.45 ° UP, PIC.2
- PUNCH TO BITE RETROGRADE ANTRO RIGHT
- PUNCH, CIRCULAR CUTTING, 65 ° UPTURNED
- PUNCH, CIRCULAR CUTTING, 65 ° UPTURNED
- PUNCH, CIRCULAR CUTTING, 65 ° UPTURNED
- PUNCH, CIRCULAR CUTTING, 65 ° UPTURNED,
- PUNCH, CIRCULAR CUTTING, STRAIGHT
- PUNCH, CIRCULAR CUTTING, STRAIGHT
- PUNCH, CIRCULAR CUTTING, STRAIGHT,
- PUNCH, CIRCULAR CUTTING, STRAIGHT,
- PUNCH, HOOKED, CURVED, SMALL
- RONGEUR HAJEK KOFLER CUT RIGHT
- RONGEUR HAJEK KOFLER STRAIGHT CUT 2X3 MM BITE
- ROTARY PUNCH MCKENTY SPHENOID
- SCHWAGER PUNCH, LEFT, FOR ENDONASAL
- SCHWAGER PUNCH, RIGHT, FOR ENDONASAL
- SKEETER FLEX DRILL OTO-
- STRAIGHT PUNCH BLAKESLEY SUCTION SIZE 3
- STRAIGHT PUNCH SIZE 2 SUCTION BLAKESLEY
- SUCTION ANTRUM PUNCH 2.5MM, BACKW.UPCUT
- SUCTION BIOPSY PUNCH, THROUGHCUT, 45 ° UP
- SUCTION BIOPSY PUNCH, THROUGHCUT, STRAIGHT
- SUCTION BIOPSY PUNCH, THROUGHCUT, UPTURNED
- SUCTION BLAKESLEY PUNCH 45 ° UPCVD SIZE 0
- SUCTION BLAKESLEY PUNCH 45 ° UPCVD SIZE 3
- SUCTION PUNCH, CIRCULAR, WL.16CM , 4.5MM DIAMETER
- SUCTION PUNCH, CIRCULAR, WL.16CM, 3.5MM Ø
- SUCTION PUNCH, CIRCULAR, WL16CM, 3.5MM Ø
- SUCTION PUNCH, CIRCULAR, WL16CM, 4.5MM Ø
- SUPER PUNCH THROUGHCUT, CVD SIZE 0 UP
- SUPER PUNCH THROUGHCUT, CVD UP, SIZE 1
- SUPER PUNCH THROUGHCUT, CVD UP, SIZE 2
- SUPER PUNCH THROUGHCUT, STR. SIZE 0
- SUPER PUNCH THROUGHCUT, STR. SIZE 1
- SUPER PUNCH THROUGHCUT, STR. SIZE 2
- TAKAHASHI PUNCH, SUCT.INTEGR.STRAIGHT
- TAKAHASHI SUCT.INTEGR.45 ° PUNCH UP, FIG.1
- TOBEY ANTRUM PUNCH, REVERSIBLE 360 °,
- WHISTLE PERFORATOR 0.3MM, 16.5CM
- WHISTLE PERFORATOR 0.4MM, 16.5CM
- XIVTH ® - PUNCH FOR MUCOSAL
- XIVTH ® - PUNCH FOR MUCOSAL
- YOON PUNCH THROUGHCUT, SHEATH 110 ° UPCVD
- YOON PUNCH THROUGHCUT, SHEATH 115 ° UPCVD
Medical Devices