List of devices falling within Class ORTHOPAEDIC PROSTHESES, BURS, SINGLE-USE - codice: P091301
In this list are all medical devices registered by the ministry of health which belong to the class P091301- (RIA REAMER IRRIGATOR ASPIRATOR)
- 0.5 MM DIAMOND BALL 10 CM
- 0.5MM ROUND FLUTED
- 0.5MM TAPERED ROUND
- 0.7MM ROUND FLUTED
- 1 MM FLUTED BALL 10 CM
- 1.0MM ADDG DRILL BIT
- 1.0MM CROSS-CUT FISSURE CARBIDE BUR
- 1.0MM ENT ACORN
- 1.0MM FLUTED ROUND
- 1.0MM TAPERED ROUND
- 1.1MM ADDG DRILL BIT
- 1.2MM ADDG DRILL BIT
- 1.2MM CROSS-CUT CARBIDE FISSURE BUR
- 1.2MM CROSS-CUT CARBIDE FISSURE BUR
- 1.2MM CROSS-CUT FISSURE CARBIDE BUR
- 1.3MM ADDG DRILL BIT
- 1.4MM ADDG DRILL BIT
- 1.5 MM FLUTED BALL 10 CM
- 1.5MM ADDG DRILL BIT SOCKS
- 1.5MM ROUND FLUTED
- 1.5MM TAPERED ROUND
- 1.6MM CROSS-CUT CARBIDE FISSURE BUR
- 1.6MM CROSS-CUT CARBIDE FISSURE BUR
- 1.6MM CROSS-CUT CARBIDE FISSURE BUR
- 1.6MM CROSS-CUT CARBIDE FISSURE BUR
- 1.6MM CROSS-CUT FISSURE CARBIDE BUR
- 1.8MM ROUND CARBIDE BUR
- 1.8MM ROUND CARBIDE BUR
- 1.8MM X 11.0MM TAPERED ROUTER
- 10.0MM ZYPHR ROUND FLUTED
- 10.5MM X 10.7MM FLUTED DRUM
- 12.3MM X 10.7MM FLUTED DRUM
- 150MM DEPTH GAUGE
- 2.0 NEURO MM DIAMOND (HEAD MATCH)
- 2.0MM
- 2.0MM EGG
- 2.0MM ENT ACORN
- 2.0MM ROUND FLUTED
- 2.0MM TAPERED ROUND SOFT-TOUCH
- 2.1 MM DRILL SHARP MEDIA
- 2.1 MM SHORT SHARP CUTTER
- 2.1MM CROSS-CUT CARBIDE BUR FISSSURE
- 2.1MM CROSS-CUT FISSURE CARBIDE BUR
- 2.1MM CROSS-CUT FISSURE CARBIDE BUR
- 2.1MM CROSS-CUT FISSURE CARBIDE BUR
- 2.1MM CROSS-CUT ROUND TIP CARBIDE FISSURE BUR
- 2.1MM CROSS-CUT ROUND TIP CARBIDE FISSURE BUR
- 2.2MM X 16.0 MM TAPERED ROUTER
- 2.3 MM FLUTED MATCHSTICK, 10 CM
- 2.3MM CARBIDE BUR ROUND
- 2.3MM CARBIDE BUR ROUND
- 2.3MM FLUTED MATCHSTICK, 15CM
- 2.5MM DIAMOND NEURO (HEAD MATCH)
- 2.5MM EGG RESURFACING TOOL
- 20 DEGREE ANGLE DRIVER
- 20.3X25 MM DIAMOND DISC
- 25.4 MM LONG DIAMOND DISC
- 2MM DIAMOND BALL 10CM
- 2MM DIAMOND BALL 15CM
- 2MM FLUTED BALL 10CM
- 2MM FLUTED BALL, 15CM
- 2MM TUBE DRILL WG
- 3.0MM CARBIDE ROUND
- 3.0MM DIAMOND NEURO (HEAD MATCH)
- 3.0MM EGG
- 3.0MM ENT ACORN
- 3.0MM FLUTED ROUND
- 3.0MM FLUTED ROUND
- 3.0MM FLUTED ROUND
- 3.0MM ROUND CARBIDE BUR
- 3.0MM ROUND FLUTED EXTENDED
- 3.0MM ROUND FLUTO TOUCH
- 3.0MM TAPERED ROUND SOFT-TOUCH
- 3.0MM X 25.0MM TAPERED ROUTER
- 3.0MM ZYPHR EXTENDED ROUND FLUTED
- 3.0MM ZYPHR FLUTED ROUND
- 3.5MM DIAMOND NEURO (HEAD MATCH)
- 3.5MM ROUND FLUTED SOFT TOUCH
- 3.5MM ZYPHR FLUTED ROUND
- 3MM COARSE DMND MATCHSTICK, 10CM
- 3MM CRSE DMND MTCHSTCK, 15 CM
- 3MM DIAMOND BALL 10 CM
- 3MM DIAMOND BALL 15CM
- 3MM FLUTED BALL 10 CM
- 3MM FLUTED BALL 15CM
- 3MM FLUTED MATCHSTICK, 10CM
- 3MM TUBE DRILL
- 4.0MM
- 4.0MM ACORN
- 4.0MM BARREL
- 4.0MM COARSE DIAMOND EGG
- 4.0MM DIAMOND NEURO (HEAD MATCH)
- 4.0MM EGG
- 4.0MM EGG RESURFACING TOOL
- 4.0MM EXTENDED FLUTED ROUND
- 4.0MM FLUTED ROUND
- 4.0MM FLUTED ROUND
- 4.0MM NEURO (MATCH HEAD)
- 4.0MM PEAR
- 4.0MM PRECISION ROUND BUR
- 4.0MM ROUND FLUTED SOFT TOUCH
- 4.0MM ROUND RESURFACING TOOL
- 4.0MM ZYPHR FLUTED ROUND
- 4.0MM-XX COARSE DIAMOND ROUND
- 4.5MM DIAMOND NEURO (HEAD MATCH)
- 4.5MM ROUND FLUTED SOFT TOUCH
- 4.7MM X 7.9MM FLUTED DRUM
- 4.7MM X 7.9MM FLUTED DRUM
- 4MM DIAMOND BALL 10CM
- 4MM DIAMOND BALL 15CM
- 5.0MM ACORN
- 5.0MM BARREL
- 5.0MM EGG
- 5.0MM PEAR
- 5.0MM PRECISION ROUND BUR
- 5.0MM ROUND FLUTED
- 5.0MM ROUND FLUTED
- 5.0MM ROUND FLUTED
- 5.0MM ROUND FLUTED EXTENDED
- 5.0MM ROUND FLUTED SOFT TOUCH
- 5.0MM-XX COARSE DIAMOND ROUND
- 5.5MM ROUND FLUTED
- 5.5MM ROUND FLUTED
- 5.5MM ROUND FLUTED SOFT TOUCH
- 6.0 5.0MM ENT ACORN 6.0 MM ENT ACORN
- 6.0MM ACORN
- 6.0MM ACORN
- 6.0MM ACORN
- 6.0MM EGG
- 6.0MM PEAR
- 6.0MM PRECISION ROUND BUR
- 6.0MM ROUND FLUTED
- 6.0MM ROUND FLUTED
- 6.0MM ROUND FLUTED
- 6.0MM ROUND FLUTED
- 6.0MM ROUND FLUTED
- 6.0MM ROUND FLUTED EXTENDED
- 6.0MM ROUND FLUTED SOFT TOUCH
- 6.0MM X 7.9MM FLUTED DRUM
- 6.5MM FLUTED ROUND
- 6.5MM FLUTED ROUND
- 7.0MM ROUND FLUTED SOFT TOUCH
- 7.0MM ZYPHR FLUTED ROUND
- 7.5MM ACORN
- 7.5MM ACORN
- 7.5MM PRECISION ROUND BUR
- 7.5MM ROUND FLUTED
- 7.5MM ROUND FLUTED
- 7.5MM X 7.9MM FLUTED DRUM
- 7.5MM-XX COARSE DIAMOND DRUM ROUND
- 8.0MM FLUTED ROUND
- 8.0MM FLUTED ROUND
- 8.0MM FLUTED ROUND
- 8.0MM ZYPHR FLUTED ROUND
- 9.0MM ACORN
- 9.0MM ROUND FLUTED
- 9.0MM ZYPHR FLUTED ROUND
- 9.1MM ROUND FLUTED
- 9.1MM X 7.9MM FLUTED DRUM
- 9.1MM X 7.9MM FLUTED DRUM
- 9.1MM-XX COARSE DIAMOND DRUM ROUND
- 9.2MM DIAMOND MILLING DRUM
- ACORN
- ACORN CUTTER
- ACORN CUTTER
- ACORN CUTTER
- ACORN CUTTER
- ALPHALOCK CAROTATRICIFRESE DIAMOND
- AO CANNULATED DRILL 2 IN 1
- APICECTOMY CARBIDE CUTTER 0.5 MM
- ASNIS MICRO CANNULATED TAP 3.0 X80 MM STERILE, ASNIS MICRO STERILE 2.8MM SCREW HOUSING CANNULATED
- ASPIRATION NEEDLE 1.0MM ROUND FLUTED
- BALL DIAMOND DRILL STEEL
- BALL MILL FOR FINISHING
- BALL MILL NEURO DIAMOND 3.2 MM
- BALL MILLING
- BARREL DIAMOND DRILL LONG COARSE GRAIN 6.5 MM
- BARREL DRILL 6.0MM AGGRESSIVE.
- BARREL MILL
- BARREL MILL
- BARREL MILL
- BARREL MILL
- BEPOD BURRS
- BIGLIANI / FLATOW - MONUSO MILL - Ø 2,5 MM
- BIGLIANI / FLATOW ® - CANNULATED MILL - Ø 6 MM - MM LENGTH 15/25/30
- BIOPLATE CUTTER
- BLADE BOLTS THREADED AND SCREWS
- BME ELITE IMPLANT DRILL KIT? C / PTA. TRAP. 3.0MM
- BOLD DRILL 2.5 / 2 IN 1
- BORING TOOL
- BROPHY MILLS FOR SURGERY PERCUTANEOUS
- BRYAN ® ACD MILLS
- BUR, ASNIS MICRO STERILE 3.8MM SCREW HOUSING
- CANNULATED CUTTER FOR STERILE DISPOSABLE HOUSING SCREW
- CANNULATED DRILL
- CANNULATED DRILL 2 IN 1
- CANNULATED TAP CANNULATED DRILL FOR HOUSING DISPOSABLE STERILE SCREW STERILE DISPOSABLE SCREW
- CARBIDE CUTTER 1.9 MM
- CARBIDE DRILL
- CARBIDE DRILL
- CARBIDE DRILL
- CARBIDE DRILL
- CARBIDE DRILL
- CARBIDE DRILL
- CARBIDE DRILL
- CARBIDE DRILL
- CARBIDE DRILL
- CENTERPIECE DRILL
- COARSE GRAIN MILLING DRUM DIAMOND
- CONICAL DRILL ¿3.1 X 13 MM - LG. SHANK 40 MM - CONF. 1 PCS - STERILE
- CONICAL DRILL ¿3.1 X 13 MM - LG. SHANK 40 MM - CONF. 6 PCS - STERILE
- CONICAL DRILL ¿4.1 X 13 MM - LG. SHANK 40 MM - CONF. 1 PCS - STERILE
- CONICAL DRILL ¿4.1 X 13 MM - LG. SHANK 40 MM - CONF. 6 PCS - STERILE
- CRANIOTOME BLADE STRAIGHT COURT
- CURVE CUTTER MIS 1.0 MM
- CUTTER
- CUTTER
- CUTTER
- CUTTER 10.0 MM SLOTTED
- CUTTER 10MM SLOTTED MEDIA
- CUTTER ACORN ENT
- CUTTER ALVEOLECTOMIA
- CUTTER ARROW
- CUTTER BROPHY ¿5.0 X 15 MM - LG. SHANK 40 MM - CONF. 1 PCS - STERILE
- CUTTER BROPHY ¿5.0 X 15 MM - LG. SHANK 40 MM - CONF. 6 PCS - STERILE
- CUTTER CARBIDE FOR THE HANDLE MEDIUM DIAMETER 2MM
- CUTTER CARBIDE FOR THE HANDLE MEDIUM DIAMETER 3MM
- CUTTER CARBIDE FOR THE HANDLE MEDIUM DIAMETER 4MM
- CUTTER CARBIDE FOR THE HANDLE MEDIUM DIAMETER 5MM
- CUTTER CARBIDE FOR THE HANDLE MEDIUM DIAMETER 6MM
- CUTTER CARBIDE FOR THE HANDLE MINI SHORT DIAMETER 2MM
- CUTTER CARBIDE FOR THE HANDLE MINI SHORT DIAMETER 3MM
- CUTTER CARBIDE FOR THE HANDLE MINI SHORT DIAMETER 4MM
- CUTTER CARBIDE FOR THE HANDLE MINI SHORT DIAMETER 5MM
- CUTTER CARBIDE FOR THE HANDLE MINI SHORT DIAMETER 6MM
- CUTTER CARBIDE FOR THE HANDLE MINI SHORT DIAMETER 7MM
- CUTTER CARBIDE FOR THE HANDLE SHORT 5MM
- CUTTER CARBIDE FOR THE HANDLE SHORT 6MM
- CUTTER CARBIDE FOR THE LONG HANDLE DIAMETER 2MM
- CUTTER CARBIDE FOR THE LONG HANDLE DIAMETER 3MM
- CUTTER CARBIDE FOR THE LONG HANDLE DIAMETER 4MM
- CUTTER CARBIDE FOR THE LONG HANDLE DIAMETER 5MM
- CUTTER CARBIDE FOR THE LONG HANDLE DIAMETER 6MM
- CUTTER CARBIDE FOR THE LONG HANDLE DIAMETER 7MM
- CUTTER CARBIDE FOR THE MEDIUM DIAMETER HANDLE 7MM
- CUTTER CUTTING QUICK
- CUTTER CUTTING SIDE STEEL 2.1 MM
- CUTTER CYLINDER 3.1 X D. L. 15MM STERILE PACK / 5
- CUTTER CYLINDER 4.1 X D. L. 15MM STERILE PACK / 5
- CUTTER CYLINDER D. L. 3.1 X 15 MM
- CUTTER CYLINDER D. L. 4.1 X 15 MM
- CUTTER DIAMOND AGRESIVA
- CUTTER DIAMOND EGG
- CUTTER DIAMOND EXTRA HARD
- CUTTER DIAMOND MEDIA
- CUTTER DIAMOND MEDIA
- CUTTER DIAMOND MEDIA
- CUTTER DISPOSABLE STERILE
- CUTTER DISPOSABLE STERILE
- CUTTER DISPOSABLE STERILE
- CUTTER DISPOSABLE STERILE
- CUTTER DISPOSABLE STERILE
- CUTTER DISPOSABLE STERILE
- CUTTER DISPOSABLE STERILE
- CUTTER DISPOSABLE STERILE
- CUTTER DISPOSABLE STERILE
- CUTTER DISPOSABLE STERILE
- CUTTER DRUM 7.5X 7.9 MM SHORT
- CUTTER FOR NEURO
- CUTTER LONG ACORN
- CUTTER LONG ACORN.
- CUTTER LONG BARREL
- CUTTER LONG SLOTTED ROUND
- CUTTER LUNGHEZZA20MM
- CUTTER NEURO 3X3.8MM
- CUTTER PERA
- CUTTER PERA
- CUTTER PERA
- CUTTER PORTMANN ROUND DIAMOND 1.45MM
- CUTTER PRECISION NEURO 3X3.8 MM MEDIUM
- CUTTER RALLY CALLED? SHANNON ISHAM? D 1.2 L 70 M
- CUTTER ROUND 2.2 MM
- CUTTER ROUND SLOTTED EXTEND MEDIA
- CUTTER SFERERICA NEURO
- CUTTER SHANNON - DIAM. 2.2 MM X L. 12 MM - MIFS
- CUTTER SHANNON - DIAM. 2.2 MM X L. 20 MM - MIFS
- CUTTER SHANNON - DIAM. 2.2 MM X L. 8 MM - MIFS
- CUTTER SHANNON - DIAM. 3 MM X L. 20 MM - MIFS
- CUTTER SHANNON ISHAM ¿2.0 X 12 MM - LG. SHANK 40 MM - CONF. 1 PCS - STERILE
- CUTTER SHANNON ISHAM ¿2.0 X 12 MM - LG. SHANK 40 MM - CONF. 6 PCS - STERILE
- CUTTER SHANNON STD ¿2.0 X 13 MM - LG. SHANK 40 MM - CONF. 1 PCS - STERILE
- CUTTER SHANNON STD ¿2.0 X 13 MM - LG. SHANK 40 MM - CONF. 6 PCS - STERILE
- CUTTER SHORT SLOTTED 10MM
- CUTTER SLOTTED AGGRESSIVE
- CUTTER SLOTTED AGGRESSIVE
- CUTTER SLOTTED MEDIA
- CUTTER SLOTTED MEDIA
- CUTTER SOFT TOUCH SLOTTED
- CUTTER SOFT TOUCH SLOTTED
- CUTTER STRAIGHT 1.9 X D. L. 10MM STERILE PACK / 5
- CUTTER STRAIGHT 2.0 X D. L. 15MM STERILE PACK / 5
- CUTTER STRAIGHT BARREL SLOTTED
- CUTTER STRAIGHT D. L. 1.9 X 10 MM
- CUTTER STRAIGHT D. L. 2.0 X 15 MM
- CUTTER STRAIGHT D. L. 2.0 X 21MM STERILE PACK / 5
- CUTTER SURGICAL PERCUTANEOUS PSB
- CUTTER SURGICAL PERCUTANEOUS PSB
- CUTTER TAPER 1.90 MM
- CUTTER TAPERED D. 3.1 / 1.0 X 12 MM L.
- CUTTER TAPERED D. 3.1 / 1.0 X L. 12MM STERILE PACK / 5
- CUTTER TAPERED D. 4.1 / 1.0 L. X 12 MM
- CUTTER TAPERED D. 4.1 / 1.0 X L. 12MM STERILE PACK / 5
- CUTTER TAPERED ELITE
- CUTTER TAPERED ELITE SOFT TOUCH
- CUTTER ZYPHR ELITE ROUND FLUTED
- CUTTER Ø 1.5X50MM, WL 5.85MM, ATTACK STRYKER
- CUTTING BURRS
- CYLINDRICAL CUTTER, BEVELLED HEAD ¿4.1 X 15 MM - LG. SHANK 40 MM - CONF. 6 PCS - STERILE
- CYLINDRICAL DRILL, BEVELLED HEAD ¿3.1 X 15 MM - LG. SHANK 40 MM - CONF. 1 PCS - STERILE
- CYLINDRICAL DRILL, BEVELLED HEAD ¿3.1 X 15 MM - LG. SHANK 40 MM - CONF. 6 PCS - STERILE
- CYLINDRICAL DRILL, BEVELLED HEAD ¿4.1 X 15 MM - LG. SHANK 40 MM - CONF. 1 PCS - STERILE
- DENTAL SCREW
- DIAMOND BALL 0.8MM, 10CM
- DIAMOND BALL TIP
- DIAMOND BUR COARSE GRAIN
- DIAMOND CUTTER
- DIAMOND CUTTER
- DIAMOND CUTTER
- DIAMOND CUTTER
- DIAMOND CUTTER
- DIAMOND CUTTER CUTTING SHORT 4.0 MM
- DIAMOND CUTTER ISO 014
- DIAMOND CUTTER MEDIUM 1.0 MM
- DIAMOND CUTTER NEURO
- DIAMOND CUTTER TAPERED
- DIAMOND DISC MEDIUM 25.4 MM
- DIAMOND DRILL LONG
- DIAMOND DRILL LONG
- DIAMOND DRILL STEEL
- DISPOSABLE INSTRUMENTS FOR OSTEOSYNTHESIS
- DRILL
- DRILL
- DRILL 2.0 MM
- DRILL 3.5 MM / 4.5 MM
- DRILL BIT 2.2MM CANNULATED
- DRILL BIT 2.7 MM
- DRILL BIT 3.0MM CANNULATED
- DRILL BIT ATTACK STRYKER
- DRILL DRILL
- DRILL NEURO MEDIA SOFT TOUCH 3.0 X 3.8 MM
- DRILL NEW BRIDGE PRIMARY BONE SCREW 2 X 3 MM LENGTH
- DRILL NEW BRIDGE PRIMARY BONE SCREW 2 X 5 MM LENGTH
- DRILL NEW BRIDGE PRIMARY BONE SCREW 2.7 X 5 MM LENGTH
- DRILL NEW BRIDGE PRIMARY BONE SCREW 2.7 X 8 MM LENGTH
- DRILL ROUND SLOTTED LONG EXTENDED
- DRILL ROUND SLOTTED MEDIA
- DRILL X-REAM
- DRILLING TEMPLATE P / BME ELITE IMPLANT
- DRILLING TEMPLATES P / BME ELITE Y
- DRILLS EXTRA SHARP AL CARBIDE FOR STANDARD HANDLES PRIMADO AND PRIMADO2
- DRUM CUTTER
- DRUM CUTTER
- DRUM CUTTER CUTTING EDGE MEDIA 6.1X3.8 MM
- DRUM SHARP CUTTER LONG 6.1X3.8 MM
- EGG CUTTER
- EGG CUTTER
- EGG CUTTER
- EGG CUTTER AGGRESSIVE
- EGG CUTTER AGGRESSIVE MEDIA
- EGG CUTTER CARBIDE
- EGG CUTTER DIAMOND 4.0 MM MEDIA
- EGG CUTTER LONG
- ENDOSKIN - MILLS FOR FOOT MINIMALLY INVASIVE SURGERY
- ENT ACORN
- EXCALIBURR TIMEDIKA
- FLUTED BALL 2.5MM, 10CM
- FLUTED MATCHSTICK 1.8MM, 10CM
- FLUTED MATCHSTICK 1.8MM, 15CM
- FLUTED MATCHSTICK 3MM, 15CM
- FLUTED ROUND 7.0MM
- FLUTED ROUND 7.0MM
- FLUTED ROUND 7.0MM
- FLUTED ROUND 7.6MM
- FOR MILLING SWANSON
- FRAISE CHEVRON PERCUTANEOUS BE POD
- FRAISES BROPHY BE POD
- FRAISES SHANNON BE POD
- FRAISES WEDGE BE POD
- FRESA NEURO 3X3.8MM
- GUIDE LCA
- HAMMERFIX 2.8 DRILL / TAP COMBO (SMALL)
- HAMMERFIX 3.4 DRILL / TAP COMBO (MEDIUM)
- HAMMERFIX 4.0 DRILL / TAP COMBO (LARGE)
- HAMMERLOCK PERFORATION KIT? 2 C / PUNTA TRAP. 2.1MM
- HIGHCUT HIGH SPEED CUTTERS
- KARL STORZ BURR STANDARD; STERILE
- KIT FOR PERFORATION TRUNK-
- LARGE TAPERED FRESAGRANA
- LONG SPIRAL CUTTER ACORN
- MEDIA 10 MM DIAMOND DRILL
- MEDIA CUTTER NEURO 3X3.8MM
- MEDIA ROUTER MILL SHARP
- MICA WEDGE 3.1 X 13MM BURR
- MICA WG BURRS
- MICA WG BURRS
- MICA WG BURRS
- MICA WG BURRS
- MICA WG BURRS
- MICA WG BURRS
- MICA WG BURRS
- MICRO DRILL ROUND
- MICRO DRILL ROUND
- MICRO DRILL ROUND
- MICRO DRILL ROUND DIAMOND
- MICRO DRILL ROUND DIAMOND
- MICRO MILLING CUTTING QUICK
- MILL BARREL DIAMOND MEDIA
- MILL OF SWANSON MEDIA
- MILL SHARP SHARP
- MILL SMALL
- MILLING ACORN MEDIA
- MILLING ACORN MEDIA
- MILLING CARBIDE 4MM OVAL SHORT
- MILLING CARBIDE OVAL 4MM LONG
- MILLING DRUM 4.7X9 MM SHORT
- MILLING DRUM ELITE
- MILLING DRUM LONG
- MILLING DRUM LONG
- MILLING DRUM MEDIA
- MILLING DRUM MEDIA
- MILLING DRUM SUPER LONG
- MILLING DRUM SUPER LONG
- MILLING MACHINE SLOTTED
- MILLING MACHINE SLOTTED
- MILLING MACHINE SLOTTED
- MILLING MACHINE SLOTTED
- MILLING MACHINE SLOTTED
- MILLING MACHINE SLOTTED LONG
- MILLING MACHINE SLOTTED LONG
- MILLS DISPOSABLE
- MILLS DISPOSABLE NON STERILE
- MILLS DPR
- MILLS MICA FOR MINI-INVASIVE SURGERY OF THE FOOT
- MILLS PERCUTECH
- MINIMAL ACCESS STRAIGHT DRIVER
- MIS 1.0MM ROUND
- MIS 2.0MM ROUND
- MIS 3.0MM ROUND
- MIS DIAMOND DRILL 3.0MM COARSE GRAIN
- MIS NEURO CURVE CUTTER
- MIS NEURO CURVE DIAMOND CUTTER
- NEURO 3.0 X 3.8 MM DRILL
- NEURO DIAMOND DRILL 3.0MM COARSE GRAIN
- NEURO EXTENDED 3.0 MM DRILL
- NEURO MEDIA CUTTER SOFT TOUCH 3X3.8 MM
- NEURO PRECISION DRILL 3.0MM
- OMEGA SURGICAL INSTRUMENTS
- ORTHOPAEDIC PROSTHESES, DRILLS
- PEAR CUTTER LONG
- PERFORATION KIT P / HAND AND WRIST BME SPEED 2.0MM
- PERFORATION KIT WITH DRILL BIT 2.65MM
- PRECISION 3.0MM ROUND BUR
- PRECISION 4.0MM ROUND BUR
- PRECISION 5.0MM ROUND BUR
- PRECISION 6.0MM ROUND BUR
- PRECISION 7.5MM ROUND BUR
- PRECISION CUTTER NEURO 3 X 3.8 MM
- PRECISION ROUND BUR 3.0MM
- RALLY CUTTER CALLED BROPHY D 5 L 55 MM
- RALLY CUTTER CALLED BROPHY D 5 L 60 MM
- RALLY CUTTER CALLED BROPHY D 5 L 65 MM
- RALLY CUTTER CALLED BROPHY D 5 L 70 MM
- RALLY CUTTER CALLED CONICAL BURR D 3.1 L 55 MM
- RALLY CUTTER CALLED CONICAL BURR D 3.1 L 60 MM
- RALLY CUTTER CALLED CONICAL BURR D 3.1 L 65 MM
- RALLY CUTTER CALLED CONICAL BURR D 3.1 L 70 MM
- RALLY CUTTER CALLED CYLIN.L STRAIGHT BURR D 2 L 55 MM
- RALLY CUTTER CALLED CYLIN.L STRAIGHT BURR D 2 L 60 MM
- RALLY CUTTER CALLED CYLIN.L STRAIGHT BURR D 2 L 65 MM
- RALLY CUTTER CALLED CYLIN.L STRAIGHT BURR D 2 L 70 MM
- RALLY CUTTER CALLED CYLINDRICAL IN HELIX D 2 L 55 MM
- RALLY CUTTER CALLED CYLINDRICAL IN HELIX D 2 L 60 MM
- RALLY CUTTER CALLED CYLINDRICAL IN HELIX D 2 L 65 MM
- RALLY CUTTER CALLED CYLINDRICAL IN HELIX D 2 L 70 MM
- RALLY CUTTER CALLED SHANNON ISHAM D 1.2 L 60 MM
- RALLY CUTTER CALLED WEDGE D 3.1 L 60 MM
- RALLY CUTTER CALLED WEDGE D 4.1 L 60 MM
- RALLY CUTTER DEN. SHANNON ISHAM SHORT D 1.2 L 55 MM
- RALLY CUTTER DEN. SHANNON ISHAM SHORT D 1.2 L 60 MM
- RALLY CUTTER DEN. SHANNON ISHAM SHORT D 1.2 L 65 MM
- RALLY CUTTER DEN. SHANNON ISHAM SHORT D 1.2 L 70 MM
- RALLY CUTTER NAMED SHANNON ISHAM D 1.2 L 55 MM
- RALLY CUTTER NAMED SHANNON ISHAM D 1.2 L 65 MM
- RALLY CUTTER NAMED WEDGE D 3.1 L 55 MM
- RALLY CUTTER NAMED WEDGE D 3.1 L 65 MM
- RALLY CUTTER NAMED WEDGE D 3.1 L 70 MM
- RALLY CUTTER NAMED WEDGE D 4.1 L 55 MM
- RALLY CUTTER NAMED WEDGE D 4.1 L 65 MM
- RALLY CUTTER NAMED WEDGE D 4.1 L 70 MM
- RASP 3.2 MM TWISTED SHORT
- REAMER - CLEAN
- REAMER BARREN
- REAMER BARREN SS
- REAMER SCREW 2,3MMX38 / DENTAL
- REAMER SCREW DENTAL
- REAMER SCREWS 1,2MMX36 / DENTAL
- REAMER SCREWS 1,2X53MM / STRYK.
- REAMER SCREWS 1,7MMX37 / DENTAL
- REAMER SCREWS STRYKER
- REAMER STERILE IN NITINOL
- REAMER STRYKER SCREWS
- REVERSE CONE DRILL LONG 6.4 MM
- REVERSE CONE DRILL MEDIA.6.4 MM
- ROUND CUTTER ZYPHR FLUT
- ROUND CUTTER ZYPHR FLUT
- ROUND FLUTED SOFT TOUCH
- ROUTER TAPERED
- SABER CUTTER SLOTTED
- SABER CUTTER SLOTTED
- SALVATION DRILL 4,9MM
- SCREW REAMER
- SCREW REAMER 1.7X54MM / STRYK.
- SCREW REAMER 2,3X55MM / STRYK. ABRASIVE BUR
- SET FOR COARSE GRAIN MILL NEURO 3.0 MM
- SHANNON BURR 3MM X 20MM LONG
- SHANNON CUTTER SHORT - 2.0 DIAMETER MM LENGTH MM 8
- SHANNON CUTTER SHORT - 3.0 DIAMETER MM LENGTH MM 20
- SHANNON DRILL SHORT ¿2.0 X 8.0 MM - LG. SHANK 40 MM - CONF. 1 PCS - STERILE
- SHANNON DRILL SHORT ¿2.0 X 8.0 MM - LG. SHANK 40 MM - CONF. 6 PCS - STERILE
- SHANNON MILLS FOR SURGERY PERCUTANEOUS
- SHANNON STRAIGHT CUTTER - 2.0 DIAMETER MM LENGTH MM 12
- SHANNON STRAIGHT CUTTER - 2.0 DIAMETER MM LENGTH MM 20
- SHARP CUTTER ROUTER
- SHARP CUTTER ROUTER
- SHARP CUTTER ROUTER 2.3X15.9 MM MEDIA
- SHARP CUTTER TAPER
- SHARP CUTTER TAPER LONG
- SHARP CUTTER TAPER MEDIA
- SHARP ROUTER 2.3X15.9 MM MEDIUM
- SHARP SHARP CUTTER LONG
- SHORT 25.4 MM DIAMOND DISC
- SKULL CUT SPIRAL BLADE
- SLOTTED LONG DRILL 10.0 MM
- SPIRAL CUTTER ACORN MEDIA
- STD 1.5MM DIAMOND BALL 15CM
- STEIGER CARBIDE CUTTER MEDIA 1.7 MM
- STEIGER CARBIDE CUTTER SHORT 1.7 MM
- STRAIGHT CYLINDRICAL CUTTER ¿2.5 X 14 MM - LG. SHANK 40 MM - CONF. 1 PCS - STERILE
- STRAIGHT CYLINDRICAL DRILL ¿2.0 X 20 MM - LG. SHANK 40 MM - CONF. 1 PCS - STERILE
- STRAIGHT CYLINDRICAL DRILL ¿2.0 X 20 MM - LG. SHANK 40 MM - CONF. 6 PCS - STERILE
- STRAIGHT CYLINDRICAL DRILL ¿2.5 X 14 MM - LG. SHANK 40 MM - CONF. 6 PCS - STERILE
- STRAIGHT CYLINDRICAL DRILL ¿3.1 X 22 MM - LG. SHANK 40 MM - CONF. 1 PCS - STERILE
- STRAIGHT CYLINDRICAL DRILL ¿3.1 X 22 MM - LG. SHANK 40 MM - CONF. 6 PCS - STERILE
- SWANSON REAMER, 4.0MMHEAD 62MMLONG 6 LUTES
- SWANSON STEEL MILL
- SYSTEM FOR HIGH SPEED MILLING NEUROSURGICAL `SHEAR WITH BALL TIP SLOTTED CODMAN
- SYSTEM FOR HIGH SPEED MILLING NEUROSURGICAL `SHEAR WITH BALL TIP SLOTTED CODMAN
- SYSTEM FOR MILLING NEUROSURGICAL HIGH SPEED TIP ROUND DIAMOND `CODMAN
- THE CUTTER CARBIDE FOR SHORT HANDLE 2MM
- THE CUTTER CARBIDE FOR SHORT HANDLE 3MM
- THE CUTTER CARBIDE FOR SHORT HANDLE 4MM
- THE CUTTER CARBIDE FOR SHORT HANDLE 7MM
- THE HANDLE CUTTER CARBIDE FOR EXTRA SHORT DIAMETER 3MM
- THE HANDLE CUTTER CARBIDE FOR EXTRA SHORT DIAMETER 4MM
- THE HANDLE CUTTER CARBIDE FOR EXTRA SHORT DIAMETER 5MM
- THE HANDLE CUTTER CARBIDE FOR EXTRA SHORT DIAMETER 6MM
- THE HANDLE CUTTER CARBIDE FOR EXTRA SHORT DIAMETER 7MM
- TIBIAL CUTTER
- TIPS GRADUATE
- TOE INTRA ORAL
- TPX ROUTER 1.5 X 12MM
- TPX ROUTER 1.5 X 20MM
- TPX ROUTER 1.5 X 30MM
- TPX ROUTER 1.5 X 8MM
- TRABECULAR METAL TOTAL ANKLE CUTTER CYLINDER
- TRABECULAR METAL TOTAL ANKLE REPLACEMENT CUTTER CYLINDER
- VERTEX ® - SINGLE CUTTER - STAINLESS STEEL
- WEDGE BURR 4.1MM X 13MM
- WEDGE CUTTER - 3.1 DIAMETER MM LENGTH MM 13
- WEDGE CUTTER - 4.1 DIAMETER MM LENGTH MM 13
- WEDGE CUTTER - DIAM. 4.3 MM X L. 13 MM - MIFS
- WEDGE CUTTER FOR SURGERY PERCUTANEOUS
- WEDGE CUTTER ¿3.1 X 13 MM - LG. SHANK 40 MM - CONF. 1 PCS - STERILE
- WEDGE CUTTER ¿3.1 X 13 MM - LG. SHANK 40 MM - CONF. 6 PCS - STERILE
- WEDGE CUTTER ¿4.1 X 13 MM - LG. SHANK 40 MM - CONF. 1 PCS - STERILE
- WEDGE CUTTER ¿4.1 X 13 MM - LG. SHANK 40 MM - CONF. 6 PCS - STERILE
- WEDGE MILL - DIAM. 2.9 MM X L. 13 MM - MIFS
- ZEPHIR® DRILL 13 MM - ATTACK AO
- ZEPHIR® DRILL 13 MM - TRIANGULAR ATTACK
Medical Devices