Medical Devices
List of devices made by the manufacturer BIAGGINI MEDICAL DEVICES SRL
Number of products: 641
Tax Code: 00704980119
VAT: 00704980119
- ABUTMENT ANG.15 ° COMP.CERTAIN - D.4,1 H.2MM
- ABUTMENT ANG.15 ° WP D.5,0 COMP. BRK
- ABUTMENT COMP. GLOBAL ANG. 15TH - D.3,8
- ABUTMENT PROVISIONAL TIT COMP. REPLACE NP ROTARY D.3,5
- ABUTMENT PROVISIONAL TIT COMP. REPLACE RP D.4,3
- ABUTMENT SUPP. CEMENTATION TIT D. 3.5 TO 4.0 COMP. ASTRA
- ABUTMENT TILTED 25 ° CONOMORSE Ø 4.10 GROSSO
- ABUTMENT TIT COMP. ASTRA ANG.15 ° H.2 D.3,5 - 4.0
- ABUTMENT TIT COMP. ASTRA ANG.15 ° H.2 D.4,5 - 5.0
- ABUTMENT TIT COMP. ASTRA ANG.15 ° H.3 D.3,5 - 4.0
- ABUTMENT TIT COMP. ASTRA ANG.15 ° H.3 D.4,5 - 5.0
- ABUTMENT TIT COMP. CERTAIN - D.3,4 H.2MM
- ABUTMENT TIT COMP. CERTAIN - D.3,4 H.4MM
- ABUTMENT TIT D.3,8 COMP. GLOBAL
- ABUTMENT TIT D.4,3 COMP. GLOBAL
- AESTHETIC ABUTMENT ANGLED 30 ° ESAG.INTERNO H.3
- AESTHETIC ABUTMENT ANGULATED 17TH ESAG.INTERNO H.3
- ANGLED ABUTMENT 15 ° CONOMORSE Ø 4,10 GROSSO
- ANGLED ABUTMENT 25 ° CONOMORSE Ø 3,30 GROSSO
- ANGLED ABUTMENT 30 ° EXEWP0 - MUA CV0WP
- ANGLED ABUTMENT 30 ° EXEWP1 - MUA CV1WP
- ANGLED ABUTMENT 30 ° EXEWP2 - MUA CV2WP
- ANGLED ABUTMENT 30 ° EXEWP3 - MUA CV3WP
- ATTACK BALL CASTABLE
- BASE / ABUTMENT PROSTHETIC STRAIGHT FLARE H.MM2 DIAMETER MEDIUM FOR PLANTS Ø 3.3MM
- BASE / STUMP DIAMETER PROTESICODRITTO LARGO FLARING H.MM3 FOR APPLIANCES Ø 5.4MM
- BASE / STUMP PROSTHETIC ANG. ØLARGO FLARING H2MM INCLIN.15 ° ORIENT. HEX. 30 ° APPLIANCES Ø 4,35MM
- BASE / STUMP PROSTHETIC ANG. ØLARGO FLARING H2MM INCLIN.15 ° ORIENT. HEX. 30 ° APPLIANCES Ø 4,7MM
- BASE / STUMP PROSTHETIC ANG. ØLARGO FLARING H2MM INCLIN.15 ° ORIENT. HEX. 30 ° Ø 3.3MM PLANTS
- BASE / STUMP PROSTHETIC ANG. ØLARGO FLARING H2MM INCLIN.15 ° ORIENT. HEX. 30 ° Ø 4MM APPLIANCES
- BASE / STUMP PROSTHETIC ANG. ØLARGO FLARING H2MM INCLIN.15 ° ORIENT. PLANTS ESAG.0 ° Ø 3.3MM
- BASE / STUMP PROSTHETIC ANG. ØLARGO FLARING H2MM INCLIN.15 ° ORIENT. PLANTS ESAG.0 ° Ø 4,35MM
- BASE / STUMP PROSTHETIC ANG. ØLARGO FLARING H2MM INCLIN.15 ° ORIENT. PLANTS ESAG.0 ° Ø 4,7MM
- BASE / STUMP PROSTHETIC ANG. ØLARGO FLARING H2MM INCLIN.15 ° ORIENT. PLANTS ESAG.0 ° Ø 4MM
- BASE / STUMP PROSTHETIC ANG. ØLARGO FLARING H3MM INCLIN.15 ° ORIENT. ESAG.0 °, Ø 4,35MM FOR PLANTS
- BASE / STUMP PROSTHETIC ANG. ØLARGO FLARING H3MM INCLIN.15 ° ORIENT. HEX. 0 ° APPLIANCES Ø 4,7MM
- BASE / STUMP PROSTHETIC ANG. ØLARGO FLARING H3MM INCLIN.15 ° ORIENT. HEX. 30 ° APPLIANCES Ø 4,35MM
- BASE / STUMP PROSTHETIC ANG. ØLARGO FLARING H3MM INCLIN.15 ° ORIENT. HEX. 30 ° Ø 3.3MM PLANTS
- BASE / STUMP PROSTHETIC ANG. ØLARGO FLARING H3MM INCLIN.15 ° ORIENT. HEX. 30 ° Ø 4MM APPLIANCES
- BASE / STUMP PROSTHETIC ANG. ØLARGO FLARING H3MM INCLIN.15 ° ORIENT. PLANTS ESAG.0 ° Ø 3.3MM
- BASE / STUMP PROSTHETIC ANG. ØLARGO FLARING H3MM INCLIN.15 ° ORIENT. PLANTS ESAG.0 ° Ø 4MM
- BASE / STUMP PROSTHETIC ANG. ØLARGO FLARING H3MM INCLIN.15 ° ORIENT. PLANTS ESAG.30 ° Ø 4,7MM
- BASE / STUMP PROSTHETIC ANG. ØLARGO FLARING H5MM INCLIN.15 ° ORIENT. HEX. 0 ° APPLIANCES Ø 3.3MM
- BASE / STUMP PROSTHETIC ANG. ØLARGO FLARING H5MM INCLIN.15 ° ORIENT. HEX. 0 ° APPLIANCES Ø 4,35MM
- BASE / STUMP PROSTHETIC ANG. ØLARGO FLARING H5MM INCLIN.15 ° ORIENT. HEX. 0 ° APPLIANCES Ø 4,7MM
- BASE / STUMP PROSTHETIC ANG. ØLARGO FLARING H5MM INCLIN.15 ° ORIENT. HEX. 0 ° APPLIANCES Ø 4MM
- BASE / STUMP PROSTHETIC ANG. ØLARGO FLARING H5MM INCLIN.15 ° ORIENT. HEX. 30 ° Ø 4MM APPLIANCES
- BASE / STUMP PROSTHETIC ANG. ØLARGO FLARING H5MM INCLIN.15 ° ORIENT. PLANTS ESAG.30 ° Ø 3.3MM
- BASE / STUMP PROSTHETIC ANG. ØLARGO FLARING H5MM INCLIN.15 ° ORIENT. PLANTS ESAG.30 ° Ø 4,35MM
- BASE / STUMP PROSTHETIC ANG. ØLARGO FLARING H5MM INCLIN.15 °, ORIENT. PLANTS ESAG.30 ° Ø 4,7MM
- BASE / STUMP PROSTHETIC ANG. ØMEDIO FLARING H2MM INCLIN.15 ° ORIENT. ESAG.30 ° PLANTS Ø 4,7MM
- BASE / STUMP PROSTHETIC ANG. ØMEDIO FLARING H2MM INCLIN.15 ° ORIENT. HEXAGON 0 ° APPLIANCES Ø 3.3MM
- BASE / STUMP PROSTHETIC ANG. ØMEDIO FLARING H2MM INCLIN.15 ° ORIENT. HEXAGON 0 ° APPLIANCES Ø 4,35MM
- BASE / STUMP PROSTHETIC ANG. ØMEDIO FLARING H2MM INCLIN.15 ° ORIENT. HEXAGON 0 ° APPLIANCES Ø 4MM
- BASE / STUMP PROSTHETIC ANG. ØMEDIO FLARING H2MM INCLIN.15 ° ORIENT. HEXAGON 0 ° PLANTS Ø 4,7MM
- BASE / STUMP PROSTHETIC ANG. ØMEDIO FLARING H2MM INCLIN.15 ° ORIENT. PLANTS ESAG.30 ° Ø 3.3MM
- BASE / STUMP PROSTHETIC ANG. ØMEDIO FLARING H2MM INCLIN.15 ° ORIENT. PLANTS ESAG.30 ° Ø 4,35MM
- BASE / STUMP PROSTHETIC ANG. ØMEDIO FLARING H2MM INCLIN.15 ° ORIENT. PLANTS ESAG.30 ° Ø 4MM
- BASE / STUMP PROSTHETIC ANG. ØMEDIO FLARING H3MM INCLIN.15 ORIENT.ESAG.0 ° ° FOR APPLIANCES Ø 4,7MM
- BASE / STUMP PROSTHETIC ANG. ØMEDIO FLARING H3MM INCLIN.15 ° ORIENT. HEX. 0 ° APPLIANCES Ø 3.3MM
- BASE / STUMP PROSTHETIC ANG. ØMEDIO FLARING H3MM INCLIN.15 ° ORIENT. PLANTS ESAG.0 ° Ø 4,35MM
- BASE / STUMP PROSTHETIC ANG. ØMEDIO FLARING H3MM INCLIN.15 ° ORIENT. PLANTS ESAG.0 ° Ø 4MM
- BASE / STUMP PROSTHETIC ANG. ØMEDIO FLARING H3MM INCLIN.15 ° ORIENT. PLANTS ESAG.30 ° Ø 3.3MM
- BASE / STUMP PROSTHETIC ANG. ØMEDIO FLARING H3MM INCLIN.15 ° ORIENT. PLANTS ESAG.30 ° Ø 4,35MM
- BASE / STUMP PROSTHETIC ANG. ØMEDIO FLARING H3MM INCLIN.15 ° ORIENT. PLANTS ESAG.30 ° Ø 4,7MM
- BASE / STUMP PROSTHETIC ANG. ØMEDIO FLARING H3MM INCLIN.15 ° ORIENT. PLANTS ESAG.30 ° Ø 4MM
- BASE / STUMP PROSTHETIC ANG. ØMEDIO FLARING H5MM INCLIN.15 ° ORIENT. HEX. 0 ° APPLIANCES Ø 3.3MM
- BASE / STUMP PROSTHETIC ANG. ØMEDIO FLARING H5MM INCLIN.15 ° ORIENT. HEX. 0 ° APPLIANCES Ø 4,35MM
- BASE / STUMP PROSTHETIC ANG. ØMEDIO FLARING H5MM INCLIN.15 ° ORIENT. HEX. 0 ° APPLIANCES Ø 4MM
- BASE / STUMP PROSTHETIC ANG. ØMEDIO FLARING H5MM INCLIN.15 ° ORIENT. PLANTS ESAG.0 ° Ø 4,7MM
- BASE / STUMP PROSTHETIC ANG. ØMEDIO FLARING H5MM INCLIN.15 ° ORIENT. PLANTS ESAG.30 ° Ø 3.3MM
- BASE / STUMP PROSTHETIC ANG. ØMEDIO FLARING H5MM INCLIN.15 ° ORIENT. PLANTS ESAG.30 ° Ø 4,35MM
- BASE / STUMP PROSTHETIC ANG. ØMEDIO FLARING H5MM INCLIN.15 ° ORIENT. PLANTS ESAG.30 ° Ø 4,7MM
- BASE / STUMP PROSTHETIC ANG. ØMEDIO FLARING H5MM INCLIN.15 ° ORIENT. PLANTS ESAG.30 ° Ø 4MM
- BASE / STUMP PROSTHETIC ANGLED ØMEDIO FLARING H1MM TILT. 20 ° ° ESAG.0 APPLIANCES Ø 3.3MM
- BASE / STUMP PROSTHETIC ANGLED ØMEDIO FLARING H1MM TILT. 20 ° ° ESAG.0 APPLIANCES Ø 4,35MM
- BASE / STUMP PROSTHETIC ANGLED ØMEDIO FLARING H1MM TILT. 20 ° ° ESAG.0 APPLIANCES Ø 4,7MM
- BASE / STUMP PROSTHETIC ANGLED ØMEDIO FLARING H1MM TILT. 20 ° ° ESAG.0 APPLIANCES Ø 4MM
- BASE / STUMP PROSTHETIC ANGLED ØMEDIO FLARING H1MM TILT. 20 ° ° ESAG.0 APPLIANCES Ø 5.4MM
- BASE / STUMP PROSTHETIC ANGLED ØMEDIO FLARING H1MM TILT. 20 ° ° ESAG.30 APPLIANCES Ø 3.3MM
- BASE / STUMP PROSTHETIC ANGLED ØMEDIO FLARING H1MM TILT. 20 ° ° ESAG.30 APPLIANCES Ø 4,35MM
- BASE / STUMP PROSTHETIC ANGLED ØMEDIO FLARING H1MM TILT. 20 ° ° ESAG.30 APPLIANCES Ø 4MM
- BASE / STUMP PROSTHETIC ANGLED ØMEDIO FLARING H1MM TILT. 20 ° ° ESAG.30 APPLIANCES Ø 5.4MM
- BASE / STUMP PROSTHETIC ANGLED ØMEDIO FLARING H4MM TILT. 20 ° ° ESAG.0 APPLIANCES Ø 3.3MM
- BASE / STUMP PROSTHETIC ANGLED ØMEDIO FLARING H4MM TILT. 20 ° ° ESAG.0 APPLIANCES Ø 4,35MM
- BASE / STUMP PROSTHETIC ANGLED ØMEDIO FLARING H4MM TILT. 20 ° ° ESAG.0 APPLIANCES Ø 4MM
- BASE / STUMP PROSTHETIC ANGLED ØMEDIO FLARING H4MM TILT. 20 ° ° ESAG.0 APPLIANCES Ø 5.4MM
- BASE / STUMP PROSTHETIC ANGLED ØMEDIO FLARING H4MM TILT. 20 ° ° ESAG.30 APPLIANCES Ø 3.3MM
- BASE / STUMP PROSTHETIC ANGLED ØMEDIO FLARING H4MM TILT. 20 ° ° ESAG.30 APPLIANCES Ø 4,35MM
- BASE / STUMP PROSTHETIC ANGLED ØMEDIO FLARING H4MM TILT. 20 ° ° ESAG.30 APPLIANCES Ø 4,7MM
- BASE / STUMP PROSTHETIC ANGLED ØMEDIO FLARING H4MM TILT. 20 ° ° ESAG.30 APPLIANCES Ø 4MM
- BASE / STUMP PROSTHETIC ANGLED ØMEDIO FLARING H4MM TILT. 20 ° ° ESAG.30 APPLIANCES Ø 5.4MM
- BASE / STUMP PROSTHETIC ANGLED ØMEDIO, FLARING H1MM TILT. 20 ° ° ESAG.30 APPLIANCES Ø 4,7MM
- BASE / STUMP PROSTHETIC DIAMETER STRAIGHT MIDDLE FLARING H.MM2 FOR APPLIANCES Ø 4,35MM
- BASE / STUMP PROSTHETIC DIAMETER STRAIGHT MIDDLE FLARING H.MM2 FOR APPLIANCES Ø 4,7MM
- BASE / STUMP PROSTHETIC DIAMETER STRAIGHT MIDDLE FLARING H.MM2 FOR APPLIANCES Ø 4MM
- BASE / STUMP PROSTHETIC DIAMETER STRAIGHT MIDDLE FLARING H.MM3 FOR APPLIANCES Ø 3.3MM
- BASE / STUMP PROSTHETIC DIAMETER STRAIGHT MIDDLE FLARING H.MM3 FOR APPLIANCES Ø 4,35MM
- BASE / STUMP PROSTHETIC DIAMETER STRAIGHT MIDDLE FLARING H.MM3 FOR APPLIANCES Ø 4,7MM
- BASE / STUMP PROSTHETIC DIAMETER STRAIGHT MIDDLE FLARING H.MM3 FOR APPLIANCES Ø 4MM
- BASE / STUMP PROSTHETIC FITTING HEX. PEREXE HEAD COUNTERSUNK TRANSMUCOUS H.4MM APPLIANCES Ø 4,35MM
- BASE / STUMP PROSTHETIC FITTING HEX. TO EXE HEAD COUNTERSUNK TRANSMUCOUS H.0MM APPLIANCES Ø 3.3MM
- BASE / STUMP PROSTHETIC FITTING HEX. TO EXE HEAD COUNTERSUNK TRANSMUCOUS H.0MM APPLIANCES Ø 4,35MM
- BASE / STUMP PROSTHETIC FITTING HEX. TO EXE HEAD COUNTERSUNK TRANSMUCOUS H.0MM APPLIANCES Ø 4,7MM
- BASE / STUMP PROSTHETIC FITTING HEX. TO EXE HEAD COUNTERSUNK TRANSMUCOUS H.0MM APPLIANCES Ø 4MM
- BASE / STUMP PROSTHETIC FITTING HEX. TO EXE HEAD COUNTERSUNK TRANSMUCOUS H.0MM APPLIANCES Ø 5.4MM
- BASE / STUMP PROSTHETIC FITTING HEX. TO EXE HEAD COUNTERSUNK TRANSMUCOUS H.2MM APPLIANCES Ø 3.3MM
- BASE / STUMP PROSTHETIC FITTING HEX. TO EXE HEAD COUNTERSUNK TRANSMUCOUS H.2MM APPLIANCES Ø 4,35MM
- BASE / STUMP PROSTHETIC FITTING HEX. TO EXE HEAD COUNTERSUNK TRANSMUCOUS H.2MM APPLIANCES Ø 4,7MM
- BASE / STUMP PROSTHETIC FITTING HEX. TO EXE HEAD COUNTERSUNK TRANSMUCOUS H.2MM APPLIANCES Ø 4MM
- BASE / STUMP PROSTHETIC FITTING HEX. TO EXE HEAD COUNTERSUNK TRANSMUCOUS H.2MM APPLIANCES Ø 5.4MM
- BASE / STUMP PROSTHETIC FITTING HEX. TO EXE HEAD COUNTERSUNK TRANSMUCOUS H.4MM APPLIANCES Ø 3.3MM
- BASE / STUMP PROSTHETIC FITTING HEX. TO EXE HEAD COUNTERSUNK TRANSMUCOUS H.4MM APPLIANCES Ø 4,7MM
- BASE / STUMP PROSTHETIC FITTING HEX. TO EXE HEAD COUNTERSUNK TRANSMUCOUS H.4MM APPLIANCES Ø 4MM
- BASE / STUMP PROSTHETIC FITTING HEX. TO EXE HEAD COUNTERSUNK TRANSMUCOUS H.4MM APPLIANCES Ø 5.4MM
- BASE / STUMP PROSTHETIC STRAIGHT DIAMETER LARGO FLARING H.MM2 FOR APPLIANCES Ø 4,35MM
- BASE / STUMP PROSTHETIC STRAIGHT DIAMETER LARGO FLARING H.MM2 FOR APPLIANCES Ø 4,7MM
- BASE / STUMP PROSTHETIC STRAIGHT DIAMETER LARGO FLARING H.MM2 FOR APPLIANCES Ø 4MM
- BASE / STUMP PROSTHETIC STRAIGHT DIAMETER LARGO FLARING H.MM2 FOR APPLIANCES Ø 5.4MM
- BASE / STUMP PROSTHETIC STRAIGHT DIAMETER LARGO FLARING H.MM3 FOR APPLIANCES Ø 4,35MM
- BASE / STUMP PROSTHETIC STRAIGHT DIAMETER LARGO FLARING H.MM3 FOR APPLIANCES Ø 4,7MM
- BASE / STUMP PROSTHETIC STRAIGHT DIAMETER LARGO FLARING H.MM3 FOR APPLIANCES Ø 4MM
- BASE / STUMP PROTESICOANGOLATO ØMEDIO FLARING H4MM TILT. 20 ° ° ESAG.0 APPLIANCES Ø 4,7MM
- BASE CASTABLE FROM MERGER WITH HEXAGON
- BASE CASTABLE FROM MERGER WITH HEXAGON
- BASE CASTABLE FROM MERGER WITH HEXAGON
- BASE CASTABLE FROM MERGER WITH HEXAGON
- BASE CASTABLE FROM MERGER WITH HEXAGON
- BASE PROSTHETIC / SOVRATRUTTURA MILLABLE ACETAL TO TENTATIVE, FOR APPLIANCES Ø 3.3MM
- BASE PROSTHETIC / SOVRATRUTTURA MILLABLE ACETAL TO TENTATIVE, FOR APPLIANCES Ø 3.3MM
- BASE PROSTHETIC / SOVRATRUTTURA MILLABLE ACETAL TO TENTATIVE, FOR APPLIANCES Ø 4,35MM
- BASE PROSTHETIC / SOVRATRUTTURA MILLABLE ACETAL TO TENTATIVE, FOR APPLIANCES Ø 4,35MM
- BASE PROSTHETIC / SOVRATRUTTURA MILLABLE ACETAL TO TENTATIVE, FOR APPLIANCES Ø 4,7MM
- BASE PROSTHETIC / SOVRATRUTTURA MILLABLE ACETAL TO TENTATIVE, FOR APPLIANCES Ø 4,7MM
- BASE PROSTHETIC / SOVRATRUTTURA MILLABLE ACETAL TO TENTATIVE, FOR APPLIANCES Ø 4MM
- BASE PROSTHETIC / SOVRATRUTTURA MILLABLE ACETAL TO TENTATIVE, FOR APPLIANCES Ø 4MM
- BASE PROSTHETIC / SOVRATRUTTURA MILLABLE ACETAL TO TENTATIVE, FOR APPLIANCES Ø 5.4MM
- BASE PROSTHETIC / SOVRATRUTTURA MILLABLE BIG TITANIUM FOR FINAL, FOR APPLIANCES Ø 3.3MM
- BASE PROSTHETIC / SOVRATRUTTURA MILLABLE BIG TITANIUM FOR FINAL, FOR APPLIANCES Ø 4,35MM
- BASE PROSTHETIC / SOVRATRUTTURA MILLABLE BIG TITANIUM FOR FINAL, FOR APPLIANCES Ø 4,7MM
- BASE PROSTHETIC / SOVRATRUTTURA MILLABLE BIG TITANIUM FOR FINAL, FOR APPLIANCES Ø 4MM
- BASE PROSTHETIC / SOVRATRUTTURA MILLABLE BIG TITANIUM FOR FINAL, FOR APPLIANCES Ø 5.4MM
- BASE PROSTHETIC / SOVRATRUTTURA MILLABLE SMALL TITANIUM FOR FINAL, FOR APPLIANCES Ø 3.3MM
- BASE PROSTHETIC / SOVRATRUTTURA MILLABLE SMALL TITANIUM FOR FINAL, FOR APPLIANCES Ø 3.3MM
- BASE PROSTHETIC / SOVRATRUTTURA MILLABLE SMALL TITANIUM FOR FINAL, FOR APPLIANCES Ø 4,35MM
- BASE PROSTHETIC / SOVRATRUTTURA MILLABLE SMALL TITANIUM FOR FINAL, FOR APPLIANCES Ø 4,35MM
- BASE PROSTHETIC / SOVRATRUTTURA MILLABLE SMALL TITANIUM FOR FINAL, FOR APPLIANCES Ø 4,7MM
- BASE PROSTHETIC / SOVRATRUTTURA MILLABLE SMALL TITANIUM FOR FINAL, FOR APPLIANCES Ø 4,7MM
- BASE PROSTHETIC / SOVRATRUTTURA MILLABLE SMALL TITANIUM FOR FINAL, FOR APPLIANCES Ø 4MM
- BASE PROSTHETIC / SOVRATRUTTURA MILLABLE SMALL TITANIUM FOR FINAL, FOR APPLIANCES Ø 4MM
- BASE PROSTHETIC / SOVRATRUTTURA MILLABLE SMALL TITANIUM FOR FINAL, FOR APPLIANCES Ø 5.4MM
- BASE PROSTHETIC / SOVRATRUTTURA MILLABLE SMALL TITANIUM FOR FINAL, FOR APPLIANCES Ø 6,5MM
- BASE PROSTHETIC / STRAIGHT STUMP PROSTHETIC TITANIUM, DIAMETER LARGO, FLARING H2MM, TO PLANT Ø4,35MM
- BASE PROSTHETIC / STRAIGHT STUMP PROSTHETIC TITANIUM, DIAMETER LARGO, FLARING H2MM, TO PLANT Ø4,7MM
- BASE PROSTHETIC / STRAIGHT STUMP PROSTHETIC TITANIUM, DIAMETER LARGO, FLARING H3MM, TO PLANT Ø3,3MM
- BASE PROSTHETIC / STRAIGHT STUMP PROSTHETIC TITANIUM, DIAMETER LARGO, FLARING H3MM, TO PLANT Ø4,35MM
- BASE PROSTHETIC / STRAIGHT STUMP PROSTHETIC TITANIUM, DIAMETER LARGO, FLARING H3MM, TO PLANT Ø4,7MM
- BASE PROSTHETIC / STRAIGHT STUMP PROSTHETIC TITANIUM, DIAMETER LARGO, FLARING H3MM, TO PLANT Ø4MM
- BASE PROSTHETIC / STRAIGHT STUMP PROSTHETIC TITANIUM, DIAMETER LARGO, FLARING H5MM, TO PLANT Ø3,3MM
- BASE PROSTHETIC / STRAIGHT STUMP PROSTHETIC TITANIUM, DIAMETER LARGO, FLARING H5MM, TO PLANT Ø4,35MM
- BASE PROSTHETIC / STRAIGHT STUMP PROSTHETIC TITANIUM, DIAMETER LARGO, FLARING H5MM, TO PLANT Ø4,7MM
- BASE PROSTHETIC / STRAIGHT STUMP PROSTHETIC TITANIUM, DIAMETER LARGO, FLARING H5MM, TO PLANT Ø4MM
- BASE PROSTHETIC / STUMP PROSTHETIC DRITTOØMEDIO, FLARING H2MM, TO PLANT Ø4MM
- BASE PROSTHETIC / STUMP PROSTHETIC STRAIGHT IØMEDIO, FLARING H3MM, TO PLANT Ø3,3MM
- BASE PROSTHETIC / STUMP PROSTHETIC STRAIGHT ØDIAMETRO MIDDLE, FLARING H5MM, TO PLANT Ø4,35MM
- BASE PROSTHETIC / STUMP PROSTHETIC STRAIGHT ØLARGO, FLARING H2MM, TO PLANT Ø3,3MM
- BASE PROSTHETIC / STUMP PROSTHETIC STRAIGHT ØLARGO, FLARING H2MM, TO PLANT Ø4MM
- BASE PROSTHETIC / STUMP PROSTHETIC STRAIGHT ØMEDIO, FLARING H2MM, TO PLANT Ø3,3MM
- BASE PROSTHETIC / STUMP PROSTHETIC STRAIGHT ØMEDIO, FLARING H2MM, TO PLANT Ø4,35MM
- BASE PROSTHETIC / STUMP PROSTHETIC STRAIGHT ØMEDIO, FLARING H2MM, TO PLANT Ø4,7MM
- BASE PROSTHETIC / STUMP PROSTHETIC STRAIGHT ØMEDIO, FLARING H3MM, TO PLANT Ø4,35MM
- BASE PROSTHETIC / STUMP PROSTHETIC STRAIGHT ØMEDIO, FLARING H3MM, TO PLANT Ø4,7MM
- BASE PROSTHETIC / STUMP PROSTHETIC STRAIGHT ØMEDIO, FLARING H3MM, TO PLANT Ø4MM
- BASE PROSTHETIC / STUMP PROSTHETIC STRAIGHT ØMEDIO, FLARING H5MM, TO PLANT Ø3,3MM
- BASE PROSTHETIC / STUMP PROSTHETIC STRAIGHT ØMEDIO, FLARING H5MM, TO PLANT Ø4,7MM
- BASE PROSTHETIC / STUMP PROSTHETIC STRAIGHT ØMEDIO, FLARING H5MM, TO PLANT Ø4MM
- BASE WITH GOLD CASTABLE FOR SOFRAFUSIONE - NO HEXAGON
- BASE WITH GOLD CASTABLE FOR SOFRAFUSIONE -NO HEXAGON
- BASE WITH GOLD CASTABLE FOR SOFRAFUSIONE -NO HEXAGON
- BASE WITH GOLD CASTABLE FOR SOFRAFUSIONE -NO HEXAGON
- BASE WITH GOLD CASTABLE FOR SOFRAFUSIONE WITH HEXAGON
- BASE WITH GOLD CASTABLE FOR SOFRAFUSIONE WITH HEXAGON
- BASE WITH GOLD CASTABLE FOR SOFRAFUSIONE WITH HEXAGON
- BASE WITH GOLD CASTABLE FOR SOFRAFUSIONE WITH HEXAGON
- BASE WITH GOLD CASTABLE FOR SOFRAFUSIONE WITH HEXAGON
- BASE WITH GOLD CASTABLE FOR SOFRAFUSIONE WITH HEXAGON
- BASE WITH GOLD CASTABLE FOR SOFRAFUSIONE WITH HEXAGON
- BASE WITH GOLD CASTABLE FOR SOFRAFUSIONE WITH HEXAGON
- BE INDIVIDUALIZED BASED SINTERED ALUMINA
- BE INDIVIDUALIZED BASED SINTERED ALUMINA
- BE INDIVIDUALIZED BASED SINTERED ALUMINA
- BE INDIVIDUALIZED BASED SINTERED ALUMINA
- BEAUTY LIMITED STRAIGHT 2 ESAG.INTERNO H.1
- BEAUTY LIMITED STRAIGHT 2 ESAG.INTERNO H.2
- BEAUTY LIMITED STRAIGHT 2 ESAG.INTERNO H.3
- BEAUTY LIMITED STRAIGHT 2 ESAG.INTERNO H.4
- CASTABLE
- CASTABLE
- CASTABLE
- CASTABLE
- CASTABLE CABLE
- CASTABLE CABLE
- CASTABLE CABLE
- CASTABLE CABLE
- CASTABLE CABLE
- CASTABLE CABLE
- CASTABLE CABLE HS
- CASTABLE CABLE WITHOUT HEXAGON
- CASTABLE CABLE WITHOUT HEXAGON
- CASTABLE CABLE WITHOUT HEXAGON
- CASTABLE CABLE WP
- CASTABLE CABLE WP
- CASTABLE CABLE WP
- CASTABLE CABLE WP
- CASTABLE CEM.
- CASTABLE CEM.
- CASTABLE CEM.
- CASTABLE CEM.
- CASTABLE CEM.HS
- CASTABLE CIRCULAR
- CASTABLE CIRCULAR
- CASTABLE CIRCULAR
- CASTABLE CIRCULAR
- CASTABLE CIRCULAR
- CASTABLE COMP.3I NOT ROT.D4 E
- CASTABLE COMP.3I NOT ROT.D5 E
- CASTABLE COMP.3I ROTARY D4 EE
- CASTABLE COMP.3I ROTARY D5 EE
- CASTABLE COMP.BKR D3,3 NR
- CASTABLE COMP.BKR D3,3 R
- CASTABLE COMP.BKR D4 NR
- CASTABLE COMP.BKR D4 R
- CASTABLE COMP.BKR D5 NR
- CASTABLE COMP.CERTAIN D4,1 R
- CASTABLE COMP.CERTAIN D5 NR
- CASTABLE COMP.KEY-FIRST D3,5 NR
- CASTABLE COMP.KEY-FIRST D4,1
- CASTABLE COMP.KOHNO D3,3 R
- CASTABLE COMP.KOHNO D3,8 NR
- CASTABLE COMP.KOHNO D4,3 NR
- CASTABLE COMP.KOHNO D4,3 R
- CASTABLE COMP.KOHNO D5 NR
- CASTABLE COMP.KOHNO D5 R
- CASTABLE COMP.REPLACE D3,5 NR
- CASTABLE COMP.REPLACE D4,3 NR
- CASTABLE COMP.REPLACE D5 NR
- CASTABLE COMP.REPLACE D5 R
- CASTABLE COMP.STRAUMANN D.6,5
- CASTABLE COMP.STRAUMANN NR
- CASTABLE COMP.STRAUMANN R
- CASTABLE COMP.ZIMMER D4 NR
- CASTABLE COMP.ZIMMER D4 R
- CASTABLE MULTI UNIT COMP.ZIMMER D.4
- CASTABLE RESTORE SD WITH ENGAGEMENT
- CASTABLE ST CONTROL HEXAGON
- CASTABLE ST CONTROL HEXAGON
- CASTABLE ST CONTROL HEXAGON
- CASTABLE ST CONTROL HEXAGON
- CASTABLE TO MERGER
- CASTABLE TO MERGER
- CUTTER RAY-SET 11MM
- CUTTER RAY-SET 13MM
- CUTTER RAY-SET 9MM
- EDITOR FOR HEXAGON OUTSIDE PLANT
- EDITOR TO PLANT COMP. MIS Ø 3.75
- EDITOR TO PLANT COMP. RPL Ø 3.50
- EDITOR TO PLANT COMP. RPL Ø 4.30
- END MILL SHORT 2,35MM
- END MILL, L.11MM SHARP, STEEL, 2 BLADES ELICOIDALI, WITH STOP, Ø2,35MM
- END MILL, L.13MM SHARP, STEEL, 2 BLADES ELICOIDALI, WITH STOP, Ø2,35MM
- END MILL, L.15MM SHARP, STEEL, 2 BLADES ELICOIDALI, WITH STOP, Ø2,35MM
- END MILL, L.7MM SHARP, STEEL, 2 BLADES ELICOIDALI, WITH STOP, Ø2,35MM
- END MILL, L.9MM SHARP, STEEL, 2 BLADES ELICOIDALI, WITH STOP, Ø2,35MM
- FRESA IN STEEL 2 BLADES ELICOIDALI, WITH STOP, Ø3MM, SHARP L.11MM
- FRESA IN STEEL 2 BLADES ELICOIDALI, WITH STOP, Ø3MM, SHARP L.13MM
- FRESA IN STEEL 2 BLADES ELICOIDALI, WITH STOP, Ø3MM, SHARP L.15MM
- FRESA IN STEEL 2 BLADES ELICOIDALI, WITH STOP, Ø3MM, SHARP L.7MM
- FRESA IN STEEL 2 BLADES ELICOIDALI, WITH STOP, Ø3MM, SHARP L.9MM
- FRESA NORM. STEEL, 4 CUTTING EDGES 90 ° NITRIDING TIN WP0 TÄGL. L.11MM
- FRESA NORM. STEEL, 4 CUTTING EDGES 90 ° NITRIDING TIN WP0 TÄGL. L.13MM
- FRESA NORM. STEEL, 4 CUTTING EDGES 90 ° NITRIDING TIN WP0 TÄGL. L.15MM
- FRESA NORM. STEEL, 4 CUTTING EDGES 90 ° NITRIDING TIN WP0 TÄGL. L.9MM
- FRESA NORM. STEEL, 4 CUTTING EDGES 90 ° NITRIDING TIN WP1 TÄGL. L.11MM, TACCA SING
- FRESA NORM. STEEL, 4 CUTTING EDGES 90 ° NITRIDING TIN WP1 TÄGL. L.13MM, TACCA SING
- FRESA NORM. STEEL, 4 CUTTING EDGES 90 ° NITRIDING TIN WP1 TÄGL. L.15MM, TACCA SING
- FRESA NORM. STEEL, 4 CUTTING EDGES 90 ° NITRIDING TIN WP1 TÄGL. L.9MM, TACCA SING
- FRESA NORM. STEEL, 4 CUTTING EDGES 90 ° NITRIDING TIN WP2 TÄGL. L.11MM, 2 NOTCHES IDENTIFIER.
- FRESA NORM. STEEL, 4 CUTTING EDGES 90 ° NITRIDING TIN WP2 TÄGL. L.13MM, 2 NOTCHES IDENTIFIER.
- FRESA NORM. STEEL, 4 CUTTING EDGES 90 ° NITRIDING TIN WP2 TÄGL. L.15MM, 2 NOTCHES IDENTIFIER.
- FRESA NORM. STEEL, 4 CUTTING EDGES 90 ° NITRIDING TIN WP2 TÄGL. L.9MM, 2 NOTCHES IDENTIFIER.
- FRESA NORM. STEEL, 4 CUTTING EDGES 90 ° NITRIDING TIN WP3 TÄGL. L.11MM, 3 NOTCHES IDENTIFIER.
- FRESA NORM. STEEL, 4 CUTTING EDGES 90 ° NITRIDING TIN WP3 TÄGL. L.13MM, 3 NOTCHES IDENTIFIER.
- FRESA NORM. STEEL, 4 CUTTING EDGES 90 ° NITRIDING TIN WP3 TÄGL. L.15MM, 3 NOTCHES IDENTIFIER.
- FRESA NORM. STEEL, 4 CUTTING EDGES 90 ° NITRIDING TIN WP3 TÄGL. L.9MM, 3 NOTCHES IDENTIFIER.
- FRESA NORM. STEEL, 4 CUTTING EDGES 90 ° NITRIDING TIN WP4 TÄGL. L.11MM, TACCA LASER 1,3MM
- FRESA NORM. STEEL, 4 CUTTING EDGES 90 ° NITRIDING TIN WP4 TÄGL. L.13MM, TACCA LASER 1,3MM
- FRESA NORM. STEEL, 4 CUTTING EDGES 90 ° NITRIDING TIN WP4 TÄGL. L.15MM, TACCA LASER 1,3MM
- FRESA NORM. STEEL, 4 CUTTING EDGES 90 ° NITRIDING TIN WP4 TÄGL. L.9MM, TACCA LASER 1,3MM
- FRESA NORM. STEEL, 4 CUTTING EDGES 90 ° NITRIDING TIN WP5 TÄGL. L.11MM, TACCA LASER 2.5MM
- FRESA NORM. STEEL, 4 CUTTING EDGES 90 ° NITRIDING TIN WP5 TÄGL. L.13MM, TACCA LASER 2.5MM
- FRESA NORM. STEEL, 4 CUTTING EDGES 90 ° NITRIDING TIN WP5 TÄGL. L.15MM, TACCA LASER 2.5MM
- FRESA NORM. STEEL, 4 CUTTING EDGES 90 ° NITRIDING TIN WP5 TÄGL. L.9MM, TACCA LASER 2.5MM
- FRESA NORMALIZING STEEL FOR GUIDED SURGERY 11 MM WP0
- FRESA NORMALIZING STEEL FOR GUIDED SURGERY 11 MM WP1
- FRESA NORMALIZING STEEL FOR GUIDED SURGERY 11 MM WP2
- FRESA NORMALIZING STEEL FOR GUIDED SURGERY 11 MM WP3
- FRESA NORMALIZING STEEL FOR GUIDED SURGERY 13 MM WP0
- FRESA NORMALIZING STEEL FOR GUIDED SURGERY 13 MM WP1
- FRESA NORMALIZING STEEL FOR GUIDED SURGERY 13 MM WP2
- FRESA NORMALIZING STEEL FOR GUIDED SURGERY 13 MM WP3
- FRESA NORMALIZING STEEL FOR GUIDED SURGERY 15 MM WP0
- FRESA NORMALIZING STEEL FOR GUIDED SURGERY 15 MM WP1
- FRESA NORMALIZING STEEL FOR GUIDED SURGERY 15 MM WP2
- FRESA NORMALIZING STEEL FOR GUIDED SURGERY 15 MM WP3
- FRESA NORMALIZING STEEL FOR GUIDED SURGERY 7 MM WP0
- FRESA NORMALIZING STEEL FOR GUIDED SURGERY 7 MM WP1
- FRESA NORMALIZING STEEL FOR GUIDED SURGERY 7 MM WP2
- FRESA NORMALIZING STEEL FOR GUIDED SURGERY 7 MM WP3
- FRESA NORMALIZING STEEL FOR GUIDED SURGERY 9 MM WP0
- FRESA NORMALIZING STEEL FOR GUIDED SURGERY 9 MM WP1
- FRESA NORMALIZING STEEL FOR GUIDED SURGERY 9 MM WP2
- FRESA NORMALIZING STEEL FOR GUIDED SURGERY 9 MM WP3
- FRESA TO RISE OF BREAST, STEEL, 4 BLADES, HEAD LUCIDA NOT SHARP, CV1
- FRESA TO RISE OF BREAST, STEEL, 4 BLADES, HEAD LUCIDA NOT SHARP, CV2
- FRESA TO RISE OF BREAST, STEEL, 4 BLADES, HEAD LUCIDA NOT SHARP, CV3
- FRESA TO RISE OF BREAST, STEEL, 4 BLADES, HEAD LUCIDA NOT SHARP, CV4
- HEALING ABUTMENT ACETAL
- HEALING ABUTMENT ACETAL
- HEALING ABUTMENT TITANIUM COUNTERSUNK HEAD H 2MM, DIAMETER LARGO TO PLANT CV1
- HEALING ABUTMENT TITANIUM COUNTERSUNK HEAD H 2MM, DIAMETER LARGO TO PLANT CV2
- HEALING ABUTMENT TITANIUM COUNTERSUNK HEAD H 2MM, DIAMETER LARGO TO PLANT CV3
- HEALING ABUTMENT TITANIUM COUNTERSUNK HEAD H 2MM, DIAMETER LARGO TO PLANT CV4
- HEALING ABUTMENT TITANIUM COUNTERSUNK HEAD H 2MM, DIAMETER LARGO TO PLANT CV5
- HEALING ABUTMENT TITANIUM COUNTERSUNK HEAD H2MM + PART CYLINDRICAL H3MM Ø LARGO FOR IMP. CV1
- HEALING ABUTMENT TITANIUM COUNTERSUNK HEAD H2MM + PART CYLINDRICAL H3MM Ø LARGO FOR IMP. CV2
- HEALING ABUTMENT TITANIUM COUNTERSUNK HEAD H2MM + PART CYLINDRICAL H3MM Ø LARGO FOR IMP. CV3
- HEALING ABUTMENT TITANIUM COUNTERSUNK HEAD H2MM + PART CYLINDRICAL H3MM Ø LARGO FOR IMP. CV4
- HEALING ABUTMENT TITANIUM COUNTERSUNK HEAD H2MM + PART CYLINDRICAL H3MM Ø LARGO FOR IMP. CV5
- HEALING ABUTMENT TITANIUM COUNTERSUNK HEAD H2MM + PART CYLINDRICAL H3MM Ø MIDDLE FOR IMP. CV1
- HEALING ABUTMENT TITANIUM COUNTERSUNK HEAD H2MM + PART CYLINDRICAL H3MM Ø MIDDLE FOR IMP. CV2
- HEALING ABUTMENT TITANIUM COUNTERSUNK HEAD H2MM + PART CYLINDRICAL H3MM Ø MIDDLE FOR IMP. CV3
- HEALING ABUTMENT TITANIUM COUNTERSUNK HEAD H2MM + PART CYLINDRICAL H3MM Ø MIDDLE FOR IMP. CV5
- HEALING ABUTMENT TITANIUM COUNTERSUNK HEAD H3MM + PART CYLINDRICAL H2MM Ø LARGO FOR IMP. CV1
- HEALING ABUTMENT TITANIUM COUNTERSUNK HEAD H3MM + PART CYLINDRICAL H2MM Ø LARGO FOR IMP. CV2
- HEALING ABUTMENT TITANIUM COUNTERSUNK HEAD H3MM + PART CYLINDRICAL H2MM Ø LARGO FOR IMP. CV3
- HEALING ABUTMENT TITANIUM COUNTERSUNK HEAD H3MM + PART CYLINDRICAL H2MM Ø LARGO FOR IMP. CV4
- HEALING ABUTMENT TITANIUM COUNTERSUNK HEAD H3MM + PART CYLINDRICAL H2MM Ø LARGO FOR IMP. CV5
- HEALING ABUTMENT TITANIUM COUNTERSUNK HEAD H3MM + PART CYLINDRICAL H2MM Ø MIDDLE FOR IMP. CV2
- HEALING ABUTMENT TITANIUM COUNTERSUNK HEAD H3MM + PART CYLINDRICAL H2MM Ø MIDDLE FOR IMP. CV3
- HEALING ABUTMENT TITANIUM COUNTERSUNK HEAD H3MM + PART CYLINDRICAL H2MM Ø MIDDLE FOR IMP. CV5
- HEALING ABUTMENT TITANIUM COUNTERSUNK HEAD H3MM + PART CYLINDRICAL H2MM Ø MIDDLE FOR IMP. MS
- HEALING ABUTMENT TITANIUM COUNTERSUNK HEAD H3MM + PART CYLINDRICAL H2MM Ø MIDDLE TO IMP.CV1
- HEALING ABUTMENT TITANIUM CYLINDRICAL HEAD Ø STRAIT TO PLANT CV1, H5MM TOT.
- HEALING ABUTMENT TITANIUM CYLINDRICAL HEAD Ø STRAIT TO PLANT CV5, H5MM TOT.
- HEALING ABUTMENT TITANIUM HEAD H 2MM FLARED, MEAN DIAMETER TO PLANT CV1
- HEALING ABUTMENT TITANIUM HEAD H 2MM FLARED, MEAN DIAMETER TO PLANT CV2
- HEALING ABUTMENT TITANIUM HEAD H 2MM FLARED, MEAN DIAMETER TO PLANT CV3
- HEALING ABUTMENT TITANIUM HEAD H 2MM FLARED, MEAN DIAMETER TO PLANT CV4
- HEALING ABUTMENT TITANIUM HEAD H 2MM FLARED, MEAN DIAMETER TO PLANT CV5
- HEALING ABUTMENT TITANIUM HEAD H 2MM FLARED, MEAN DIAMETER TO PLANT MS
- HEALING ABUTMENT TITANIUM HEAD H 3MM COUNTERSUNK, DIAMETER LARGO TO PLANT CV1
- HEALING ABUTMENT TITANIUM HEAD H 3MM COUNTERSUNK, DIAMETER LARGO TO PLANT CV2
- HEALING ABUTMENT TITANIUM HEAD H 3MM COUNTERSUNK, DIAMETER LARGO TO PLANT CV3
- HEALING ABUTMENT TITANIUM HEAD H 3MM COUNTERSUNK, DIAMETER LARGO TO PLANT CV4
- HEALING ABUTMENT TITANIUM HEAD H 3MM COUNTERSUNK, DIAMETER LARGO TO PLANT CV5
- HEALING ABUTMENT TITANIUM HEAD H 3MM COUNTERSUNK, MEAN DIAMETER TO PLANT CV1
- HEALING ABUTMENT TITANIUM HEAD H 3MM COUNTERSUNK, MEAN DIAMETER TO PLANT CV2
- HEALING ABUTMENT TITANIUM HEAD H 3MM COUNTERSUNK, MEAN DIAMETER TO PLANT CV3
- HEALING ABUTMENT TITANIUM HEAD H 3MM COUNTERSUNK, MEAN DIAMETER TO PLANT CV4
- HEALING ABUTMENT TITANIUM HEAD H 3MM COUNTERSUNK, MEAN DIAMETER TO PLANT CV5
- HEALING ABUTMENT TITANIUM HEAD H 3MM COUNTERSUNK, MEAN DIAMETER TO PLANT MS
- HEALING ABUTMENT TITANIUM, CYLINDRICAL HEAD CYLINDER H2MM TO PLANT WP0
- HEALING ABUTMENT TITANIUM, CYLINDRICAL HEAD CYLINDER H2MM TO PLANT WP1
- HEALING ABUTMENT TITANIUM, CYLINDRICAL HEAD CYLINDER H2MM TO PLANT WP2
- HEALING ABUTMENT TITANIUM, CYLINDRICAL HEAD CYLINDER H2MM TO PLANT WP3
- HEALING ABUTMENT TITANIUM, CYLINDRICAL HEAD CYLINDER H3MM TO PLANT WP0
- HEALING ABUTMENT TITANIUM, CYLINDRICAL HEAD CYLINDER H3MM TO PLANT WP1
- HEALING ABUTMENT TITANIUM, CYLINDRICAL HEAD CYLINDER H3MM TO PLANT WP2
- HEALING ABUTMENT TITANIUM, CYLINDRICAL HEAD CYLINDER H3MM TO PLANT WP3
- HEALING ABUTMENT TITANIUM, CYLINDRICAL HEAD CYLINDER H5MM TO PLANT WP0
- HEALING ABUTMENT TITANIUM, CYLINDRICAL HEAD CYLINDER H5MM TO PLANT WP1
- HEALING ABUTMENT TITANIUM, CYLINDRICAL HEAD CYLINDER H5MM TO PLANT WP2
- HEALING ABUTMENT TITANIUM, CYLINDRICAL HEAD CYLINDER H5MM TO PLANT WP3
- HEALING ABUTMENT TITANIUM, HEAD COUNTERSUNK LARGA, FLARING H 2MM FOR APPLIANCES WP0
- HEALING ABUTMENT TITANIUM, HEAD COUNTERSUNK LARGA, FLARING H 2MM FOR APPLIANCES WP1
- HEALING ABUTMENT TITANIUM, HEAD COUNTERSUNK LARGA, FLARING H 2MM FOR APPLIANCES WP2
- HEALING ABUTMENT TITANIUM, HEAD COUNTERSUNK LARGA, FLARING H 2MM FOR APPLIANCES WP3
- HEALING ABUTMENT TITANIUM, HEAD COUNTERSUNK LARGA, FLARING H 3MM FOR APPLIANCES WP0
- HEALING ABUTMENT TITANIUM, HEAD COUNTERSUNK LARGA, FLARING H 3MM FOR APPLIANCES WP1
- HEALING ABUTMENT TITANIUM, HEAD COUNTERSUNK LARGA, FLARING H 3MM FOR APPLIANCES WP2
- HEALING ABUTMENT TITANIUM, HEAD COUNTERSUNK LARGA, FLARING H 3MM FOR APPLIANCES WP3
- HEALING ABUTMENT TITANIUM, HEAD COUNTERSUNK LARGA, FLARING H 5MM FOR APPLIANCES WP0
- HEALING ABUTMENT TITANIUM, HEAD COUNTERSUNK LARGA, FLARING H 5MM FOR APPLIANCES WP1
- HEALING ABUTMENT TITANIUM, HEAD COUNTERSUNK LARGA, FLARING H 5MM FOR APPLIANCES WP2
- HEALING ABUTMENT TITANIUM, HEAD COUNTERSUNK LARGA, FLARING H 5MM FOR APPLIANCES WP3
- HEALING ABUTMENT TITANIUM, HEAD COUNTERSUNK MEDIA, FLARING H 2MM FOR APPLIANCES WP0
- HEALING ABUTMENT TITANIUM, HEAD COUNTERSUNK MEDIA, FLARING H 2MM FOR APPLIANCES WP1
- HEALING ABUTMENT TITANIUM, HEAD COUNTERSUNK MEDIA, FLARING H 2MM FOR APPLIANCES WP2
- HEALING ABUTMENT TITANIUM, HEAD COUNTERSUNK MEDIA, FLARING H 2MM FOR APPLIANCES WP3
- HEALING ABUTMENT TITANIUM, HEAD COUNTERSUNK MEDIA, FLARING H 3MM FOR APPLIANCES WP0
- HEALING ABUTMENT TITANIUM, HEAD COUNTERSUNK MEDIA, FLARING H 3MM FOR APPLIANCES WP1
- HEALING ABUTMENT TITANIUM, HEAD COUNTERSUNK MEDIA, FLARING H 3MM FOR APPLIANCES WP2
- HEALING ABUTMENT TITANIUM, HEAD COUNTERSUNK MEDIA, FLARING H 3MM FOR APPLIANCES WP3
- HEALING ABUTMENT TITANIUM, HEAD COUNTERSUNK MEDIA, FLARING H 5MM FOR APPLIANCES WP0
- HEALING ABUTMENT TITANIUM, HEAD COUNTERSUNK MEDIA, FLARING H 5MM FOR APPLIANCES WP1
- HEALING ABUTMENT TITANIUM, HEAD COUNTERSUNK MEDIA, FLARING H 5MM FOR APPLIANCES WP2
- HEALING ABUTMENT TITANIUM, HEAD COUNTERSUNK MEDIA, FLARING H 5MM FOR APPLIANCES WP3
- INCLINED STUMP 15TH CONOMORSE Ø 3.30 GROSSO
- KHONO MUA ANGLED 17 ° Ø 3.80
- KHONO MUA ANGLED 17 ° Ø 4.25
- KHONO MUA ANGLED 30 ° Ø 3.80
- KHONO MUA ANGLED 30 ° Ø 4.25
- KHONO MUA STRAIGHT Ø 3.80 H1
- KHONO MUA STRAIGHT Ø 3.80 H2
- KHONO MUA STRAIGHT Ø 3.80 H3
- KHONO MUA STRAIGHT Ø 4.25 H1
- KHONO MUA STRAIGHT Ø 4.25 H2
- KHONO MUA STRAIGHT Ø 4.25 H3
- KIT GOLD AU400 GR.0,8
- KIT GOLD AU400 GR.0,8
- KIT GOLD AU400 GR.0,8
- KIT GOLD AU400 GR.0,8
- KIT GOLD AU400 GR.0,8
- KIT GOLD AU400 GR.0,8
- KIT GOLD AU400 GR.0,8
- KIT GOLD AU400 GR.0,8
- KIT GOLD AU400 GR.0,8
- KIT GOLD AU400 GR.0,8
- KIT GOLD AU400 GR.0,8
- KIT GOLD AU400 GR.0,8
- KIT GOLD AU400 GR.0,8
- KIT GOLD AU400 GR.0,9
- KIT GOLD AU400 GR.1HS
- LIVES THROUGH ANCHOR TITANIUM MEDIA Ø2,2MM L.11MM
- LIVES THROUGH ANCHOR TITANIUM SHORT Ø2,2MM L.6MM
- LIVES THROUGH ANCHORAGE TITANIUM LONG Ø2,2MM L.15MM
- LIVES THROUGH COMP. 3I
- LIVES THROUGH COMP. CERTAIN
- LIVES THROUGH COMP. D.3,5 ASTRA - 4.0
- LIVES THROUGH COMP. KOHNO D 4,3 - 5.0 TO 6.0
- LIVES THROUGH COMP. KOHNO D.3,8
- LIVES THROUGH COMP. LIFECORE D.3,5 - FROM 4.1 TO 5.0
- LIVES THROUGH COMP. LIFECORE EXTERNAL HEXAGON
- LIVES THROUGH COMP. RPL NP TORX GRANDE
- LIVES THROUGH COMP. RPL NP TORX SMALL
- LIVES THROUGH HEIGHT MM.2
- LIVES THROUGH HEIGHT MM.4
- LIVES THROUGH LIMITED 2 ALLEN
- LIVES THROUGH LIMITED 2 HEXAGON INT. (HEAD HOLD)
- LIVES THROUGH LONG MAXX COMP. STRAUMAN SCREW D.4,8
- LIVES THROUGH MUA ANGULATED COMP. BRK RP
- LIVES THROUGH SECONDARY
- MUA ANGLED 17 ° H3 COMP. CERTAIN Ø 4.10
- MUA ANGLED 30 ° H4 COMP. CERTAIN Ø 4.10
- MUA STRAIGHT H2 COMP. CERTAIN Ø 4.10
- MUA STRAIGHT H4 COMP. CERTAIN Ø 4.10
- NOT STUMP PROVVOSORIO ROTARY NEOSS Ø 4.10
- OVERDENTURE / ATTACK BALL THE BALL Ø 2MM, H TRANSMUC. 0MM, TO PLANT Ø4MM
- OVERDENTURE / ATTACK SPHERE SPHERE Ø 2MM, H TRANSMUC. 0MM FOR APPLIANCES Ø3,3MM
- OVERDENTURE / ATTACK SPHERE SPHERE Ø 2MM, H TRANSMUC. 0MM, TO PLANT Ø3,3MM
- OVERDENTURE / ATTACK SPHERE SPHERE Ø 2MM, H TRANSMUC. 0MM, TO PLANT Ø4,35MM
- OVERDENTURE / ATTACK SPHERE SPHERE Ø 2MM, H TRANSMUC. 0MM, TO PLANT Ø4,35MM
- OVERDENTURE / ATTACK SPHERE SPHERE Ø 2MM, H TRANSMUC. 0MM, TO PLANT Ø4,7MM
- OVERDENTURE / ATTACK SPHERE SPHERE Ø 2MM, H TRANSMUC. 0MM, TO PLANT Ø4,7MM
- OVERDENTURE / ATTACK SPHERE SPHERE Ø 2MM, H TRANSMUC. 0MM, TO PLANT Ø4MM
- OVERDENTURE / ATTACK SPHERE SPHERE Ø 2MM, H TRANSMUC. 2MM, TO PLANT Ø3,3MM
- OVERDENTURE / ATTACK SPHERE SPHERE Ø 2MM, H TRANSMUC. 2MM, TO PLANT Ø4,35MM
- OVERDENTURE / ATTACK SPHERE SPHERE Ø 2MM, H TRANSMUC. 2MM, TO PLANT Ø4,35MM
- OVERDENTURE / ATTACK SPHERE SPHERE Ø 2MM, H TRANSMUC. 2MM, TO PLANT Ø4,7MM
- OVERDENTURE / ATTACK SPHERE SPHERE Ø 2MM, H TRANSMUC. 2MM, TO PLANT Ø4,7MM
- OVERDENTURE / ATTACK SPHERE SPHERE Ø 2MM, H TRANSMUC. 2MM, TO PLANT Ø4MM
- OVERDENTURE / ATTACK SPHERE SPHERE Ø 2MM, H TRANSMUC. 2MM, TO PLANT Ø4MM
- OVERDENTURE / ATTACK SPHERE SPHERE Ø 2MM, H TRANSMUC. 4MM, FOR PLANT Ø3,3MM
- OVERDENTURE / ATTACK SPHERE SPHERE Ø 2MM, H TRANSMUC. 4MM, FOR PLANT Ø3,3MM
- OVERDENTURE / ATTACK SPHERE SPHERE Ø 2MM, H TRANSMUC. 4MM, FOR PLANT Ø4,35MM
- OVERDENTURE / ATTACK SPHERE SPHERE Ø 2MM, H TRANSMUC. 4MM, FOR PLANT Ø4,35MM
- OVERDENTURE / ATTACK SPHERE SPHERE Ø 2MM, H TRANSMUC. 4MM, FOR PLANT Ø4,7MM
- OVERDENTURE / ATTACK SPHERE SPHERE Ø 2MM, H TRANSMUC. 4MM, FOR PLANT Ø4,7MM
- OVERDENTURE / ATTACK SPHERE SPHERE Ø 2MM, H TRANSMUC. 4MM, FOR PLANT Ø4MM
- OVERDENTURE / ATTACK SPHERE SPHERE Ø 2MM, H TRANSMUC. 4MM, FOR PLANT Ø4MM
- OVERDENTURE / ATTACK SPHERE SPHERE Ø 2MM, H TRANSMUC.A 2MM, TO PLANT Ø3,3MM
- OVERDENTURE / CASTABLE FOR BARRE FOR APPLIANCES Ø3,3MM
- OVERDENTURE / CASTABLE FOR BARRE FOR APPLIANCES Ø4,35MM
- OVERDENTURE / CASTABLE FOR BARRE FOR APPLIANCES Ø4,7MM
- OVERDENTURE / CASTABLE FOR BARRE FOR APPLIANCES Ø4MM
- OVERDENTURE / SCREW THROUGH TO BAR PROSTHETIC TITANIUM
- OVERDENTURE / STUMP FOR IMPLANTS H TRANSMUCOSAL 1MM FOR PLANTS Ø3,3MM
- OVERDENTURE / STUMP FOR PROSTHETICS H TRANSMUCOSAL 1MM, TO PLANT Ø4,35MM
- OVERDENTURE / STUMP FOR PROSTHETICS H TRANSMUCOSAL 1MM, TO PLANT Ø4,7MM
- OVERDENTURE / STUMP FOR PROSTHETICS H TRANSMUCOSAL 1MM, TO PLANT Ø4MM
- OVERDENTURE / STUMP FOR PROSTHETICS H TRANSMUCOSAL 2MM, TO PLANT Ø3,3MM
- OVERDENTURE / STUMP FOR PROSTHETICS H TRANSMUCOSAL 2MM, TO PLANT Ø4,35MM
- OVERDENTURE / STUMP FOR PROSTHETICS H TRANSMUCOSAL 2MM, TO PLANT Ø4,7MM
- OVERDENTURE / STUMP FOR PROSTHETICS H TRANSMUCOSAL 2MM, TO PLANT Ø4MM
- PILOT DRILL CYLINDRICAL STEEL, SHARP 3 A 120 °, NITRIDING TIN
- PILOT DRILL CYLINDRICAL STEEL, SHORT, Ø2,35MM
- PLANT NP 3.65 / 09MM NARROW PLATE
- PLANT NP 3.65 / 11MM NARROW PLATE
- PLANT NP 3.65 / 13MM NARROW PLATE
- PLANT NP 3.65 / 15MM NARROW PLATE
- PLANT NP 4 / 09MM NARROW PLATE
- PLANT NP 4 / 11MM NARROW PLATE
- PLANT NP 4 / 13MM NARROW PLATE
- PLANT NP 4 / 15MM NARROW PLATE
- PLANT NP 4.7 / 09MM NARROW PLATE
- PLANT NP 4.7 / 11MM NARROW PLATE
- PLANT NP 4.7 / 13MM NARROW PLATE
- PLANT NP 4.7 / 15MM NARROW PLATE
- PLANT WP * 4,7 / 11MM WIDE-PLATE
- PLANT WP * 4,7 / 15MM WIDE-PLATE
- PLANT WP * 5,4 / 09MM WIDE-PLATE
- PLANT WP * 5,4 / 11MM WIDE-PLATE
- PLANT WP * 5,4 / 11MM WIDE-PLATE
- PLANT WP * 5,4 / 13MM WIDE-PLATE
- PLANT WP 3.3 / 09MM WIDE-PLATE
- PLANT WP 3.3 / 11MM WIDE-PLATE
- PLANT WP 3.3 / 13MM WIDE-PLATE
- PLANT WP 3.3 / 15MM WIDE-PLATE
- PLANT WP 3.3 / 15MM WIDE-PLATE
- PLANT WP 4 / 07MM WIDE-PLATE
- PLANT WP 4 / 09MM WIDE-PLATE
- PLANT WP 4 / 11MM WIDE-PLATE
- PLANT WP 4 / 13MM WIDE-PLATE
- PLANT WP 4 / 15MM WIDE-PLATE
- PLANT WP 4.35 / 07MM WIDE-PLATE
- PLANT WP 4.35 / 09MM WIDE-PLATE
- PLANT WP 4.35 / 09MM WIDE-PLATE
- PLANT WP 4.35 / 11MM WIDE-PLATE
- PLANT WP 4.35 / 11MM WIDE-PLATE
- PLANT WP 4.35 / 13MM WIDE-PLATE
- PLANT WP 4.35 / 13MM WIDE-PLATE
- PLANT WP 4.35 / 15MM WIDE-PLATE
- PLANT WP 4.7 / 07MM WIDE-PLATE
- PLANT WP 4.7 / 07MM WIDE-PLATE
- PLANT WP 4.7 / 09MM WIDE-PLATE
- PLANT WP 4.7 / 09MM WIDE-PLATE
- PLANT WP 4.7 / 13MM WIDE-PLATE
- PLANT WP 4.7 / 13MM WIDE-PLATE
- PROSTHETIC BASE / SUPERSTRUCTURE SCANS CAD-CAM WITH O ZIRCONIA ALUMINA PLANT Ø 3.3MM
- PROSTHETIC BASE / SUPERSTRUCTURE SCANS CAD-CAM WITH O ZIRCONIA ALUMINA PLANT Ø 3.3MM
- PROSTHETIC BASE / SUPERSTRUCTURE SCANS CAD-CAM WITH O ZIRCONIA ALUMINA PLANT Ø 4,35MM
- PROSTHETIC BASE / SUPERSTRUCTURE SCANS CAD-CAM WITH O ZIRCONIA ALUMINA PLANT Ø 4,35MM
- PROSTHETIC BASE / SUPERSTRUCTURE SCANS CAD-CAM WITH O ZIRCONIA ALUMINA PLANT Ø 4,7MM
- PROSTHETIC BASE / SUPERSTRUCTURE SCANS CAD-CAM WITH O ZIRCONIA ALUMINA PLANT Ø 4,7MM
- PROSTHETIC BASE / SUPERSTRUCTURE SCANS CAD-CAM WITH O ZIRCONIA ALUMINA PLANT Ø 4MM
- PROSTHETIC BASE / SUPERSTRUCTURE SCANS CAD-CAM WITH O ZIRCONIA ALUMINA PLANT Ø 4MM
- PROSTHETIC BASE / SUPERSTRUCTURE SCANS CAD-CAM WITH O ZIRCONIA ALUMINA PLANT Ø 5.4MM
- PROSTHETIC BASE / SUPERSTRUCTURE SCANS CAD-CAM WITH O ZIRCONIA ALUMINA PLANT Ø 6,5MM
- PROVISIONAL STUMP
- PROVISIONAL STUMP
- PROVISIONAL STUMP STRAIGHT N / R ASTRA Ø 3.50 / 4.00
- PROVISIONAL STUMP STRAIGHT N / R COMP. P / KH Ø 3.80
- PROVISIONAL TIT STUMP. N / R NP - D.3,5 COMP. BRK
- RIGHT ABUTMENT ESAG.INTERNO - D.4 H.1MM LIMITED 2
- RIGHT ABUTMENT ESAG.INTERNO - D.4 H.2MM LIMITED 2
- RIGHT ABUTMENT ESAG.INTERNO - D.4 H.3MM LIMITED 2
- RIGHT ABUTMENT ESAG.INTERNO - D.4 H.4MM LIMITED 2
- RING BEAUTY ANG. 17TH D.4,0 COMP. BRK
- RING BEAUTY ANG. 30 ° D.4,0 COMP. BRK
- ROTATING CASTABLE COMP.ACTIVE Ø 3.50 NP
- ROTATING CASTABLE COMP.ACTIVE Ø 4.30 / 5.00 RP
- SCREW CAP FOR APPLIANCES Ø 3.75 TO 4.00
- SCREW CAP FOR APPLIANCES Ø 5.00
- SCREW CAP FOR PLANT COMP. MIS Ø 3.75
- SCREW FOR RPL EDITOR APPLIANCES Ø 3.50
- SCREW FOR RPL EDITOR APPLIANCES Ø 4.30
- SCREW HEALING COMP. REPLACE - D.3,5 H.3MM
- SCREW HEALING COMP. REPLACE - D.4,3 H.3MM
- SCREW HEALING COMP. REPLACE - D.4,3 H.5MM
- SCREW HEX EDITOR
- SCREW KHONO MUA ANGLED Ø 3.80
- SCREW KHONO MUA ANGLED Ø 4.25
- SCREW LONG COPING AESTHETIC COMP. BRK
- SCREW M1.8 FOR MUA COMP.ZIMMER (E / I)
- SCREW PASSANTE
- SCREW PASSANTE
- SCREW PLUG COMP. D.3,5 ASTRA - 4.0
- SCREW PLUG COMP. REPLACE NP D.3,5
- SCREW SIST.EXE TITANIUM PROSTHESIS FOR SCREWED SCREW UNICA TO EXE-CV AND EXE H.0
- SCREW SIST.EXE TITANIUM PROSTHESIS FOR SCREWED SCREW UNICA TO EXE-MS AND EXE H.0
- SCREW SIST.EXE TITANIUM PROSTHESIS FOR SCREWED SCREW UNICA TO EXE-MS AND EXE H.2
- SCREW SIST.EXE TITANIUM PROSTHESIS FOR SCREWED. SCREW UNICA TO EXE-CV AND EXE H.2
- SCREW SIST.EXE TITANIUM PROSTHESIS SCREWED SCREW TO PRIMARY TO EXE-CV
- SCREW TO EDITOR APPLIANCES Ø 3.75
- STRAIGHT STUMP CONOMORSE Ø 3.30 GROSSO
- STRAIGHT STUMP CONOMORSE Ø 4.10 GROSSO
- STUMP DIRTTO PROVISIONAL ROT. COMP. P / KH Ø 4.25
- STUMP DIRTTO TENTATIVE N / R COMP. P / KH Ø 4.25
- STUMP FOR PROVISIONAL AESTHETIC ABUTMENT D.4 LIMITED 1
- STUMP H2 L1,5
- STUMP H2 L1,5
- STUMP H2 L1,5
- STUMP H2 L1,5
- STUMP H4 L3,5
- STUMP H4 L3,5
- STUMP H4 L3,5
- STUMP H4 L3,5
- STUMP HEALING TITANIUM COUNTERSUNK HEAD H2MM + PART CILINDRICA H3MM Ø MEDIUM FOR IMP. MS
- STUMP STRAIGHT PROVISIONAL COMP. ACTIVE Ø 3.50 NP
- STUMP STRAIGHT PROVISIONAL COMP. ACTIVE Ø 4.30 / 5.00 RP
- STUMP STRAIGHT PROVISIONAL ROT. COMP. ACTIVE Ø 3.50
- STUMP STRAIGHT PROVISIONAL ROT. COMP. ACTIVE Ø 4.30 / 5.00 RP
- STUMP STRAIGHT PROVISIONAL ROT. COMP. P / KH Ø 3.80
- STUMP STUMP ANGLED 15 ° E / I D.4,0 LIMITED 2
- STUMP STUMP ANGULATED 15TH COMP. LEONE - 3.3 D.
- STUMP STUMP ANGULATED 25TH COMP. LEONE - 4.1 D.
- SYSTEM * 97 * 4 / 07MM
- SYSTEM * 97 * 4 / 09MM
- SYSTEM * 97 * 4 / 11MM
- SYSTEM * 97 * 4 / 13MM
- SYSTEM * 97 * 4 / 15MM
- SYSTEM * 97 * 4 / 17MM
- SYSTEM * 97 * 4,7 / 07MM
- SYSTEM * 97 * 4,7 / 09MM
- SYSTEM * 97 * 4,7 / 11MM
- SYSTEM * 97 * 4,7 / 13MM
- SYSTEM * 97 * 4,7 / 15MM
- SYSTEM * 97 * 4,7 / 17MM
- SYSTEM * 97 * 4.35 / 07MM
- SYSTEM * 97 * 4.35 / 09MM
- SYSTEM * 97 * 4.35 / 11MM
- SYSTEM * 97 * 4.35 / 13MM
- SYSTEM * 97 * 4.35 / 15MM
- SYSTEM * 97 * 4.35 / 17MM
- SYSTEM * 97 * 5,4 / 07MM
- SYSTEM * 97 * 5,4 / 09MM
- SYSTEM * 97 * 5,4 / 11MM
- SYSTEM * 97 * 5,4 / 13MM
- SYSTEM * 97 * 5,4 / 15MM
- SYSTEM * 97 * 5,4 / 17MM
- SYSTEM * 97 * 6.5 / 11MM
- SYSTEM * 97 * 6.5 / 13MM
- SYSTEM * 97 * 6.5 / 9MM
- THROUGH THE EXTRA-TITANIUM SCREW ANCHOR Ø2,2MM L.2,5MM
- TILLER PILOT TRIANG. TIP 3 CUTS STAGGERED A 120 ° STEEL Ø2,35MM SHORT STEM 13,5MM
- TIT STUMP STUMP ANGLED 15 ° E / E - D.4,0 COMP. 3I
- TIT STUMP STUMP ANGLED 25 ° E / E - D. 4MM COMP. 3I
- TIT STUMP STUMP ANGLED 25 ° E / I - D. 4.0 LIMITED 2
- TIT STUMP. COMP. KOHNO ANG.15 ° - D.3,8
- TIT STUMP. COMP. KOHNO ANG.15 ° - D.4,3
- TRIANGULAR STEEL CUTTER Ø2,35MM LONG STEM 21.5MM