Our numbers

• 879.412 medical devices
• 12.856 producers
• 6.771 categories

List of devices made by the manufacturer EDIERRE IMPLANT SYSTEM SPA

• 30 ° ANGLED ABUTMENT FOR SCREW RETAINED PROSTHESIS
• 30 ° ANGLED ABUTMENT FOR SCREW RETAINED PROSTHESIS
• 4.5 X15 SCREW SYSTEM TEST
• 45 ° ANGLED ABUTMENT CONNECTION WITH SCREW D. 3.75 T2
• 45 ° ANGLED ABUTMENT CONNECTION WITH SCREW D. 4,2 T2
• A SHORT MANUAL SCREWDRIVER CAM TRILOBATA
• ABUTMENT 3.75 TEST SYSTEM FOR
• ABUTMENT CASTABLE D. 3.75 SCREW CONNECTION
• ABUTMENT CASTABLE D. 4.2 SCREW CONNECTION
• ABUTMENT CASTABLE D. 4.5 SCREW CONNECTION
• ABUTMENT CASTABLE D. 5.00 SCREW CONNECTION
• ABUTMENT CASTABLE D.3, 30, SCREW CONNECTION
• ABUTMENT PRIMER SYSTEM FOR CEMENTING SRDMM 3.30 TRANSMUCOSAL 3.0 MM TITANIUM
• ABUTMENT RIGHT FOR PACKAGED SCREWED PROSTHESIS
• ABUTMENT RIGHT FOR PACKAGED SCREWED PROSTHESIS
• ABUTMENT RIGHT FOR PACKAGED SCREWED PROSTHESIS
• ANALOG TO DIGITAL
• ANALOG TO DIGITAL
• ANGLED ABUTMENT 22 ° FOR SCREWED PROSTHESIS ANTI-DECUBITUS
• ATTACK WITH INSERT
• BOLTS SYSTEM TEST - ALL SIZES
• BONE MILL WITH SCREW GUIDE
• BOTTOM
• CAP SCREW DRIVER MANUAL AND CONNECTION MONCONICORTO
• CAP SCREW DRIVER MANUAL FOR CONNECTING AND DIE LONG
• CAPPETTA CASTABLE DIE FOR BAR SERIES 3.30
• CAPPETTA CASTABLE DIE FOR BAR SERIES 3.75
• CAPPETTA CASTABLE DIE FOR BAR SERIES 4.2
• CAPPETTA CASTABLE DIE FOR BAR SERIES 4.5
• CAPPETTA CASTABLE DIE FOR SERIES 5 BAR
• CAPPETTA CASTABLE STUMP FOR ANGLED 30 ° SCREWED FOR PROSTHESIS
• CAPPETTA TITANIUM FOR ANGLED ABUTMENT FOR SCREWED PROSTHESIS FOR DIGITAL
• CAPPETTA TITANIUM FOR PROSTHESES SCREWED FOR DIGITAL + CONNECTION D. SECONDARY VINES 3.3
• CAPPETTA TITANIUM FOR SCREWED PROSTHESIS FOR DIGITAL + BOLTS OF CONN. D. SECONDARY 3.75 / 4.2 / 4.5
• CASTABLE ABUTMENTS D.MM 3.30
• CASTABLE ABUTMENTS D.MM 3.75
• CASTABLE ABUTMENTS D.MM 4.20
• CASTABLE ABUTMENTS D.MM 4.50
• CASTABLE ABUTMENTS D.MM 5, 00
• CLOSED FOR TRANSFER SIGNATURE SPOON 30 ° ANGLED ABUTMENT FOR SCREW RETAINED PROSTHESIS
• COPING A FLOWER FOR TRANSFER ENDED SPOON DIAM. 3.3
• COPING A FLOWER FOR TRANSFER ENDED SPOON DIAM. 3.75/4.2/4.5/5
• COPING FOR RESIDUAL RIGHTS TO BURN SCREWED PROSTHESIS
• COPING FOR RESIDUAL RIGHTS TO BURN SCREWED PROSTHESIS
• COPING IN TITANIUM FOR STUMP FOR ANGLED 30 ° SCREWED PROSTHESIS
• COPING IN TITANIUM IMPLANTS FOR RESIDUAL RIGHTS FOR SCREWED
• COPING IN TITANIUM IMPLANTS FOR RESIDUAL RIGHTS FOR SCREWED 3.3
• CUTTER DEPTH 'CONE WITH EXTERNAL IRRIGATION D.4.5 L.10
• CUTTER DEPTH' CONE WITH EXTERNAL IRRIGATION D.5.0 L .10
• CUTTER LANCEOLATA D.2
• CUTTER OF DEPTH' CONE WITH EXTERNAL IRRIGATION D.4.2 L.15
• CUTTER PILOT 2.2
• CUTTER PREPARATION SHOULDER SHORT
• CUTTER STOP
• CUTTER WITH PILOT OUTDOOR WATERING D.2.2 L.11
• DENTAL IMPLANT - SHORT PRIMER - D. 4.8 L.6.6MM
• DENTAL IMPLANT PRIMER ETD 3.75 L. 13
• DENTAL IMPLANT PRIMER ETD 3.75 L. 18
• DENTAL IMPLANT PRIMER ETD 3.75 L. 18
• DENTAL IMPLANT PRIMER ETD 3.75 L.13
• DENTAL IMPLANT PRIMER ETD 3.75 L.15
• DENTAL IMPLANT PRIMER ETD 3.75 L.15
• DENTAL IMPLANT PRIMER SR D 3.30 L 11
• DENTAL IMPLANT PRIMER SRD 3.75 L. 5
• DENTAL IMPLANT PRIMER SRD 3.75 L.11
• DENTAL IMPLANT PRIMER SRD 3.75 L.13
• DENTAL IMPLANT PRIMER SRD 3.75 L.8.50
• DENTAL IMPLANT PRIMER SRD 3.75 L.9.95
• DENTAL IMPLANT PRIMER SRD 3:30 L 13
• DENTAL IMPLANT PRIMER SRD 3:30 L. 9.95
• DENTAL IMPLANT PRIMER SRD 3:30 L15
• DENTAL IMPLANT PRIMER SRD 4:20 L.11
• DENTAL IMPLANT PRIMER SRD 4:20 L.13
• DENTAL IMPLANT PRIMER SRD 4:20 L.15
• DENTAL IMPLANT PRIMER SRD 4:20 L.8.50
• DENTAL IMPLANT PRIMER SRD 4:20 L.9.95
• DENTAL IMPLANT PRIMER SRD 4:50 L.11
• DENTAL IMPLANT PRIMER SRD 4:50 L.13
• DENTAL IMPLANT PRIMER SRD 4:50 L.15
• DENTAL IMPLANT PRIMER SRD 4:50 L.9.95
• DENTAL IMPLANT PRIMER SRD 5:00 L.11
• DENTAL IMPLANT PRIMER SRD 5:00 L.13
• DENTAL IMPLANT PRIMER SRD 5:00 L.15
• DENTAL IMPLANT PRIMER SRD 5:00 L.8.50
• DENTAL IMPLANT PRIMER SRD 5:00 L.9.95
• DIE FOR TEST SYSTEM - ALL SIZES
• DIE TEST ¿ALL SIZES
• DRILL DEPTH ' CONE WITH EXTERNAL IRRIGATION D.3.3 L.9.95
• DRILL DEPTH '3.75 TAPER
• DRILL DEPTH '3.75 TAPER
• DRILL DEPTH '4.5 TAPER
• DRILL DEPTH '4.5 TAPER
• DRILL DEPTH 'CONE WITH EXTERNAL IRRIGATION D .5.0 L.8.5
• DRILL DEPTH 'CONE WITH EXTERNAL IRRIGATION D.3.3 L.11
• DRILL DEPTH 'CONE WITH EXTERNAL IRRIGATION D.3.3 L.15
• DRILL DEPTH 'CONE WITH EXTERNAL IRRIGATION D.3.3 L.6.6
• DRILL DEPTH 'CONE WITH EXTERNAL IRRIGATION D.3.75 L .13
• DRILL DEPTH 'CONE WITH EXTERNAL IRRIGATION D.3.75 L.10
• DRILL DEPTH 'CONE WITH EXTERNAL IRRIGATION D.3.75 L.15
• DRILL DEPTH 'CONE WITH EXTERNAL IRRIGATION D.3.75 L.6.6
• DRILL DEPTH 'CONE WITH EXTERNAL IRRIGATION D.4.2 L.6.6
• DRILL DEPTH 'CONE WITH EXTERNAL IRRIGATION D.4.5 L.11
• DRILL DEPTH 'CONE WITH EXTERNAL IRRIGATION D.4.5 L.15
• DRILL DEPTH 'CONE WITH EXTERNAL IRRIGATION D.4.5 L.6.6
• DRILL DEPTH 'CONE WITH EXTERNAL IRRIGATION D.4.5 L.8.5
• DRILL DEPTH 'CONE WITH EXTERNAL IRRIGATION D.5.0 L.11
• DRILL DEPTH 'DLC CONE D. 4.5
• DRILL DEPTH 'TAPER 3.30
• DRILL DEPTH 'TAPER 3.30
• DRILL DEPTH 'TAPER 4.2
• DRILL DEPTH 'TAPER 4.2
• DRILL DEPTH 'TAPER 5
• DRILL DEPTH 'TAPER 5
• DRILL DEPTH' CONE WITH EXTERNAL IRRIGATION D. L.13 3.3
• DRILL DEPTH' CONE WITH EXTERNAL IRRIGATION D.3.3 L.8.5
• DRILL DEPTH' CONE WITH EXTERNAL IRRIGATION D.3.75 L.11
• DRILL DEPTH' CONE WITH EXTERNAL IRRIGATION D.3.75 L.8.5
• DRILL DEPTH' CONE WITH EXTERNAL IRRIGATION D.4.2 L.8.5
• DRILL DEPTH' CONE WITH EXTERNAL IRRIGATION D.4.5 L.12
• DRILL DEPTH' CONE WITH EXTERNAL IRRIGATION D.5.0 L.13
• DRILL DEPTH' DLC CONE D. 5.0
• DRILL DRIVER 2.2 X 36
• DRILL DRIVER WITH EXTERNAL IRRIGATION D.2.2 L .8.5
• DRILL DRIVER WITH EXTERNAL IRRIGATION D.2.2 L.13
• DRILL DRIVER WITH EXTERNAL IRRIGATION D.2.2 L.15
• DRILL DRIVER WITH EXTERNAL IRRIGATION D.2.2 L.6.6
• DRILL DRIVER WITH EXTERNAL IRRIGATION D.2.2 L.9.95
• DRIVER CUT ONLY FOR PROSTHESIS SCREWED
• DRIVER FOR CHANNEL ANGULATED
• DRIVER MANUAL CAM QUATREFOIL BIG LONG
• DRIVER MANUAL CAM QUATREFOIL GREAT SHORT
• DRIVER MANUAL CAM QUATREFOIL LITTLE SHORT
• DRIVER MANUAL CAM QUATREFOIL SMALL LONG
• DRIVER MANUAL CAM TRILOBATA LONG
• EXTENSION FOR MILLS
• FINGERPRINT KIT TRANSFER SPOON OPEN 3.30
• FOR TAPPING 4.2 SYSTEM SCREW
• FOR TAPPING SCREW SYSTEM 5
• HEX SCREWDRIVER FOR SHORT HANDLE
• HEXAGON SCREWDRIVER FOR LONG HANDLE
• HITCH BALL MICRO D.MM 3.30 0.5 H.MM
• HITCH BALL MICRO D.MM 3.30 2.0 H.MM
• HITCH BALL MICRO D.MM 3.30 4.0 H.MM
• HITCH BALL MICRO D.MM 3.75 0.5 H.MM
• HITCH BALL MICRO D.MM 3.75 2.0 H.MM
• HITCH BALL MICRO D.MM 3.75 4.0 H.MM
• HITCH BALL MICRO D.MM H.MM 4.2 0.5
• HITCH BALL MICRO D.MM H.MM 4.2 2.0
• HITCH BALL MICRO D.MM H.MM 4.2 4.0
• HITCH BALL MICRO D.MM H.MM 4.5 0.5
• HITCH BALL MICRO D.MM H.MM 4.5 2.0
• HITCH BALL MICRO D.MM H.MM 4.5 4.0
• HITCH BALL MICRO D.MM H.MM 5.0 0.5
• HITCH BALL MICRO D.MM H.MM 5.0 2.0
• HITCH BALL MICRO D.MM H.MM 5.0 4.0
• INDICATOR OF PARALLEL
• INSERT GREAT FOR TORQUE WRENCH
• LINK IN CONNECTION WITH SCREW YOU D. 3.3
• LINK IN CONNECTION WITH SCREW YOU D. 3.75
• LINK IN CONNECTION WITH SCREW YOU D. 4.2/4.5
• LINK IN TI + WITHOUT CONNECTION OF SCREW CONN.DIAM. 3.3
• LINK IN TI + WITHOUT CONNECTION OF SCREW CONN.DIAM. 3.75
• LINK IN TI + WITHOUT CONNECTION OF SCREW CONN.DIAM. 4.2 4.5
• LIVES OF HEALING ANATOMICAL D.MM TRANSMUCOSAL 3.30 MM 1.0
• LIVES OF HEALING ANATOMICAL D.MM TRANSMUCOSAL 3.30 MM 3.0
• LIVES OF HEALING ANATOMICAL D.MM TRANSMUCOSAL 3.30 MM 5.0
• LIVES OF HEALING ANATOMICAL D.MM TRANSMUCOSAL 3.75 MM 1.0
• LIVES OF HEALING ANATOMICAL D.MM TRANSMUCOSAL 3.75 MM 3.0
• LIVES OF HEALING ANATOMICAL D.MM TRANSMUCOSAL 3.75 MM 5.0
• LIVES OF HEALING ANATOMICAL D.MM TRANSMUCOSAL 4.2 MM 1.0
• LIVES OF HEALING ANATOMICAL D.MM TRANSMUCOSAL 4.2 MM 3.0
• LIVES OF HEALING ANATOMICAL D.MM TRANSMUCOSAL 4.2 MM 5.0
• LIVES OF HEALING ANATOMICAL D.MM TRANSMUCOSAL 4.5 MM 1.0
• LIVES OF HEALING ANATOMICAL D.MM TRANSMUCOSAL 4.5 MM 3.0
• LIVES OF HEALING ANATOMICAL D.MM TRANSMUCOSAL 4.5 MM 5.0
• LIVES OF HEALING ANATOMICAL D.MM TRANSMUCOSAL 5.0 MM 1.0
• LIVES OF HEALING ANATOMICAL D.MM TRANSMUCOSAL 5.0 MM 3.0
• LIVES OF HEALING ANATOMICAL D.MM TRANSMUCOSAL 5.0 MM 5.0
• LIVES OF HEALING D.MM TRANSMUCOSAL 3.30 MM 1.0
• LIVES OF HEALING D.MM TRANSMUCOSAL 3.30 MM 3.0
• LIVES OF HEALING D.MM TRANSMUCOSAL 3.30 MM 5.0
• LIVES OF HEALING D.MM TRANSMUCOSAL 3.75 MM 1.0
• LIVES OF HEALING D.MM TRANSMUCOSAL 3.75 MM 3.0
• LIVES OF HEALING D.MM TRANSMUCOSAL 3.75 MM 5.0
• LIVES OF HEALING D.MM TRANSMUCOSAL 4.2 MM 1.0
• LIVES OF HEALING D.MM TRANSMUCOSAL 4.2 MM 3.0
• LIVES OF HEALING D.MM TRANSMUCOSAL 4.2 MM 5.0
• LIVES OF HEALING D.MM TRANSMUCOSAL 4.5 MM 1.0
• LIVES OF HEALING D.MM TRANSMUCOSAL 4.5 MM 3.0
• LIVES OF HEALING D.MM TRANSMUCOSAL 4.5 MM 5.0
• LIVES OF HEALING D.MM TRANSMUCOSAL 5.0 MM 1.0
• LIVES OF HEALING D.MM TRANSMUCOSAL 5.0 MM 3.0
• LIVES OF HEALING D.MM TRANSMUCOSAL 5.0 MM 5.0
• LIVES OF HEALING FOR RESIDUAL LIMB PROSTHESIS FOR ANGLED 30 ° SCREWED
• LIVES OF HEALING FOR RESIDUAL LIMB PROSTHESIS FOR RIGHT SCREWED
• LIVES OF HEALING FOR RESIDUAL LIMB PROSTHESIS FOR RIGHT SCREWED 3.3
• LONG SCREW CONNECTION TO TRANSFER THE SPOON OPEN D.MM 3.30
• MANUAL SCREWDRIVER HEX LONG
• MILLING DEPTH 'SYSTEM FOR SHORT PRIMER
• MILLING DEPTH 'TAPER - ALL SIZES
• MILLING DEPTH 'TAPER - ALL SIZES
• MILLING DEPTH 'TAPER - ALL SIZES
• MILLING DEPTH 'TAPER - ALL SIZES
• MILLING OF DEPTH 'CONE WITH EXTERNAL IRRIGATION D.4.2 L.10
• MILLING OF DEPTH 'CONE WITH EXTERNAL IRRIGATION D.4.2 L.13
• MILLING OF DEPTH 'TAPER DLC D . 4.2
• MILLING OF DEPTH 'TAPER DLC D. 3.3
• MILLING OF DEPTH' CONE WITH EXTERNAL IRRIGATION D.4.2 L.11
• MILLING OF DEPTH' TAPER DLC D. 3.7
• MILLS OF DEEPER DEPTH 'PRIMER SYSTEM FOR EASY TAPPING
• MILLS OF DEEPER DEPTH 'PRIMER SYSTEM FOR EASY TAPPING
• OSTEOTOME ANGULATED D.MM 3.30
• OSTEOTOME ANGULATED D.MM 3.75
• OSTEOTOME ANGULATED D.MM 4.20
• OSTEOTOME ANGULATED D.MM 4.50
• OSTEOTOME ANGULATED D.MM 5.00
• OSTEOTOME D.MM 3.30 RIGHT
• OSTEOTOME D.MM 3.75 RIGHT
• OSTEOTOME D.MM 4.20 RIGHT
• OSTEOTOME D.MM 4.50 RIGHT
• OSTEOTOME D.MM 5.00 RIGHT
• OSTEOTOME UNIVERSAL ANGULATED D.MM 2.00
• PRE-MILLED IN IT FOR DIGITAL
• PRE-MILLED IN IT FOR DIGITAL
• PREPARATION OF SHOULDER CUTTERS - ALL SIZES
• PREPARATION OF SHOULDER CUTTERS - ALL SIZES
• PREPARATION OF SHOULDER MILLING - ALL SIZES
• PREPARATION OF SHOULDER MILLING - ALL SIZES
• PREPARATION OF SHOULDER MILLING PLANT 5
• PREPARATION OF SHOULDER MILLING PLANT 5
• PRIMER KIT SURGICAL
• PRIMER KIT SURGICAL
• PRIMER KIT SURGICAL
• PRIMER KIT SURGICAL UV
• PRIMER PRIMER FOR SURGICAL KIT EASY TAPPING
• RESIDUAL LIMB PROSTHESIS FOR RIGHT SCREWED + SCREW CONNECTION D.3.3 TRANS 2
• RESIDUAL LIMB PROSTHESIS FOR RIGHT SCREWED + SCREW CONNECTION D.3.3 TRANS 4
• RESIDUAL LIMB PROSTHESIS FOR RIGHT SCREWED + SCREW CONNECTION D.3.75 TRANS 4
• RESIDUAL LIMB PROSTHESIS FOR RIGHT SCREWED + SCREW CONNECTION D.3.75TRANS 2
• RESIDUAL LIMB PROSTHESIS FOR RIGHT SCREWED + SCREW CONNECTION D.4.2 TRANS 2
• RESIDUAL LIMB PROSTHESIS FOR RIGHT SCREWED + SCREW CONNECTION D.4.2 TRANS 4
• RESIDUAL LIMB PROSTHESIS FOR RIGHT SCREWED + SCREW CONNECTION D.4.5 TRANS 2
• RESIDUAL LIMB PROSTHESIS FOR RIGHT SCREWED + SCREW CONNECTION D.4.5 TRANS 4
• RESIDUAL TEST SYSTEM FOR 4.2
• RESIDUAL TEST SYSTEM FOR 5
• SCANBODIES FOR DIGITAL
• SCANBODIES FOR DIGITAL
• SCREW ASSEMBLY FOR STUMP BAR 3,75 / 4,2 / 4,5 / 5
• SCREW ASSEMBLY FOR STUMP BAR 3,75 / 4,2 / 4,5 / 5
• SCREW ASSEMBLY FOR STUMP BAR 3.30
• SCREW ASSEMBLY FOR STUMP BAR 3.30
• SCREW ASSEMBLY FOR STUMP BAR 3.30
• SCREW ASSEMBLY FOR STUMP BAR 3.75 / 4.2 / 4.4 / 5
• SCREW CONNECTION FOR SCREWED PROSTHESIS FOR RELIEF OF IMPRESSION A SPOON OPEN
• SCREW CONNECTION FOR TRANSFER ENDED SPOON D.MM 3.30
• SCREW CONNECTION FOR TRANSFER ENDED SPOON D.MM 3.75 / 4.2 / 4,5 / 5
• SCREW CONNECTION FOR TRANSFER OF LONG SPOON OPEN D.MM 3.75 / 4.2 / 4.5 / 5
• SCREW CONNECTION TO DIE SERIES CAM SMALL AND LARGE D.MM 3.75 / 4.2 / 4.5 / 5
• SCREW CONNECTION TO DIE SERIES CAM TRILOBATA D.MM 3.30
• SCREW CONNECTION TO PRIMARY LAW FOR RESIDUAL LIMB PROSTHESIS SCREWED
• SCREW CONNECTION TO PRIMARY LAW FOR RESIDUAL LIMB PROSTHESIS SCREWED
• SCREW CONNECTION TO PRIMARY LAW FOR RESIDUAL LIMB PROSTHESIS SCREWED
• SCREW CONNECTION TO PRIMARY LAW FOR RESIDUAL LIMB PROSTHESIS SCREWED
• SCREW SHORT HANDLE FOR BIG CAM QUATREFOIL
• SCREW SYSTEM TEST - ALL SIZES
• SCREW SYSTEM TEST 3.30 X15
• SCREW SYSTEM TEST 3.75 X15
• SCREW SYSTEM TEST 4.2 X15
• SCREWDRIVER FOR LARGE LONG HANDLE CAM QUATREFOIL
• SCREWDRIVER FOR SMALL LONG HANDLE CAM QUATREFOIL
• SCREWDRIVER FOR SMALL SHORT HANDLE CAM QUATREFOIL
• SCREWDRIVER HANDLE FOR LONG CAM TRILOBATA
• SCREWDRIVER HANDLE FOR SHORT CAM TRILOBATA
• SET 5 OSTEOTOMES
• SET 5 OSTEOTOMES ANGULATED
• SET 5 OSTEOTOMES BENT
• SET 5 OSTEOTOMES RIGHTS
• SHORT HEX DRIVER MANUAL
• SHOULDER MILLING PLANT PREPARATION 3.30
• SHOULDER MILLING PLANT PREPARATION 3.30
• SHOULDER MILLING PLANT PREPARATION 3.75
• SHOULDER MILLING PLANT PREPARATION 3.75
• SHOULDER MILLING PLANT PREPARATION 4.2
• SHOULDER MILLING PLANT PREPARATION 4.2
• SHOULDER MILLING PLANT PREPARATION 4.5
• SHOULDER MILLING PLANT PREPARATION 4.5
• SIMILAR LABORATORY FOR RESIDUAL LIMB PROSTHESIS FOR ANGLED 30 ° SCREWED
• SIMILAR LABORATORY FOR RESIDUAL LIMB PROSTHESIS SCREWED RIGHT D. 3,75 / 4,2 / 4,5 / 5
• SIMILAR LABORATORY FOR RESIDUAL LIMB PROSTHESIS SCREWED RIGHT D. 3.3
• SIMILAR LABORATORY IN ALUMINIUM D.MM 3.30
• SIMILAR LABORATORY IN ALUMINIUM D.MM 3.75
• SIMILAR LABORATORY IN ALUMINIUM D.MM 4.50
• SIMILAR LABORATORY IN ALUMINIUM D.MM 5.00
• SIMILAR LABORATORY IN STAINLESS STEEL D.MM 3.30
• SIMILAR LABORATORY IN STAINLESS STEEL D.MM 3.75
• SIMILAR LABORATORY IN STAINLESS STEEL D.MM 4.2
• SIMILAR LABORATORY IN STAINLESS STEEL D.MM 4.5
• SIMILAR LABORATORY IN STAINLESS STEEL D.MM 5.0
• SIMILAR LABORATORY N ALUMINUM D.MM 4.20
• STOP FOR CUTTER TAPER D. 3.3 / 3.75
• STOP FOR CUTTER TAPER D. 3.3 / 3.75 / 4.2 / 4.5 ¿LENGTH 9,95 / 11/13
• STOP FOR CUTTER TAPER D. 4.2 / 4.5
• STOP FOR CUTTER TAPER D. 5
• STOP FOR CUTTER TAPER D. 5 ¿LENGTH 9,95 / 11/13
• STOP FOR MILLING L.9 95/11/13
• STOP FOR PILOT DRILLS AND TAPER
• STOP FOR PILOT DRILLS AND TAPER L. 6.6
• STOP FOR TILLER PILOT D. 2.2
• STUMP 15 ° ANGLED WITH SCREW CONNECTION D. 3.30 T1
• STUMP 15 ° ANGLED WITH SCREW CONNECTION D. 3.30 T3
• STUMP 15 ° ANGLED WITH SCREW CONNECTION D. 3.30 T5
• STUMP 15 ° ANGLED WITH SCREW CONNECTION D. 4.20 T1
• STUMP 15 ° ANGLED WITH SCREW CONNECTION D. 4.20 T2
• STUMP 15 ° ANGLED WITH SCREW CONNECTION D. 4.20 T5
• STUMP 15 ° ANGLED WITH SCREW CONNECTION D. 4.50 T1
• STUMP 15 ° ANGLED WITH SCREW CONNECTION D. 4.50 T3
• STUMP 15 ° ANGLED WITH SCREW CONNECTION D. 4.50 T5
• STUMP 15 ° ANGLED WITH SCREW CONNECTION D. 5.00 T 1
• STUMP 15 ° ANGLED WITH SCREW CONNECTION D. 5.00 T 3
• STUMP 15 ° ANGLED WITH SCREW CONNECTION D. 5.00 T 5
• STUMP 15 ° ANGLED WITH SCREW CONNECTION D.3, 75 T1
• STUMP 15 ° ANGLED WITH SCREW CONNECTION D.3, 75 T3
• STUMP 15 ° ANGLED WITH SCREW CONNECTION D.3, 75 T5
• STUMP 15 ° ANGLED WITH SCREW CONNECTION VARIANT ¿D.3, 30 T1
• STUMP 15 ° ANGLED WITH SCREW CONNECTION VARIANT ¿D.3, 75 T1
• STUMP 15 ° ANGLED WITH SCREW CONNECTION VARIANT ¿D.3, 75 T3
• STUMP 15 ° ANGLED WITH SCREW CONNECTION VARIANT ¿D.3, 75 T5
• STUMP 15 ° ANGLED WITH SCREW CONNECTION ¿VARIANT D. 3.30 T3
• STUMP 15 ° ANGLED WITH SCREW CONNECTION ¿VARIANT D. 3.30 T5
• STUMP 15 ° ANGLED WITH SCREW CONNECTION ¿VARIANT D. 5.00 T5
• STUMP 15 ° ANGLED WITH SCREW CONNECTION ¿VARIANT D.4, 20 T1
• STUMP 15 ° ANGLED WITH SCREW CONNECTION ¿VARIANT D.4, 20 T3
• STUMP 15 ° ANGLED WITH SCREW CONNECTION ¿VARIANT D.4, 20T5
• STUMP 15 ° ANGLED WITH SCREW CONNECTION ¿VARIANT D.4, 50 T1
• STUMP 15 ° ANGLED WITH SCREW CONNECTION ¿VARIANT D.4, 50 T3
• STUMP 15 ° ANGLED WITH SCREW CONNECTION ¿VARIANT D.4, 50 T5
• STUMP 15 ° ANGLED WITH SCREW CONNECTION ¿VARIANT D.5, 00 T1
• STUMP 15 ° ANGLED WITH SCREW CONNECTION ¿VARIANT D.5, 00 T3
• STUMP 17 ° ANGLED WITH SCREW CONNECTION D. 3.75 T2
• STUMP 17 ° ANGLED WITH SCREW CONNECTION D. 3.75 T4T2
• STUMP 17 ° ANGLED WITH SCREW CONNECTION D. 4.2 T2
• STUMP 17 ° ANGLED WITH SCREW CONNECTION D. 4.2 T4
• STUMP 25 ° ANGLED WITH SCREW CONNECTION D. 3.30 MM T1
• STUMP 25 ° ANGLED WITH SCREW CONNECTION D. 3.30 MM T3
• STUMP 25 ° ANGLED WITH SCREW CONNECTION D. 3.75 MM T1
• STUMP 25 ° ANGLED WITH SCREW CONNECTION D. 3.75 MM T3
• STUMP 25 ° ANGLED WITH SCREW CONNECTION D. 4.20 MM T1
• STUMP 25 ° ANGLED WITH SCREW CONNECTION D. 4.20 MM T3
• STUMP FOR COPING WITH BAR AND BURN SCREW CONNECTION D. 3.30 T1
• STUMP FOR COPING WITH BAR AND BURN SCREW CONNECTION D. 3.30 T3
• STUMP FOR COPING WITH BAR AND BURN SCREW CONNECTION D. 3.30 T5
• STUMP FOR COPING WITH BAR AND BURN SCREW CONNECTION D. 3.75 T1
• STUMP FOR COPING WITH BAR AND BURN SCREW CONNECTION D. 3.75 T3
• STUMP FOR COPING WITH BAR AND BURN SCREW CONNECTION D. 3.75 T5
• STUMP FOR COPING WITH BAR AND BURN SCREW CONNECTION D. 4.20 T1
• STUMP FOR COPING WITH BAR AND BURN SCREW CONNECTION D. 4.20 T3
• STUMP FOR COPING WITH BAR AND BURN SCREW CONNECTION D. 4.20 T5
• STUMP FOR COPING WITH BAR AND BURN SCREW CONNECTION D. 4.50 T1
• STUMP FOR COPING WITH BAR AND BURN SCREW CONNECTION D. 4.50 T3
• STUMP FOR COPING WITH BAR AND BURN SCREW CONNECTION D. 4.50 T5
• STUMP FOR COPING WITH BAR AND BURN SCREW CONNECTION D. 5.00 T1
• STUMP FOR COPING WITH BAR AND BURN SCREW CONNECTION D. 5.00 T3
• STUMP FOR COPING WITH BAR AND BURN SCREW CONNECTION D. 5.00 T5
• STUMP FOR PROVISIONAL SYSTEM PRIMER SRDMM 5.00 TRANSMUCOSAL 1.0 MM
• STUMP FOR PROVISIONAL SYSTEM PRIMER SRDMM TRANSMUCOSAL 4.2 MM 1.0
• STUMP FOR PROVISIONAL SYSTEM PRIMER SRDMM TRANSMUCOSAL 4.5 MM 1.0
• STUMP FOR TEST EQUIPMENT 4.5
• STUMP FOR TEST SYSTEM 3.30
• STUMP IN GOLD FOR COPING WITH UCLA BURN AND SCREW CONNECTION D 3.30
• STUMP IN GOLD FOR COPING WITH UCLA BURN AND SCREW CONNECTION D 3.75
• STUMP IN GOLD FOR COPING WITH UCLA BURN AND SCREW CONNECTION D 4.20
• STUMP IN GOLD FOR COPING WITH UCLA BURN AND SCREW CONNECTION D 4.50
• STUMP IN GOLD FOR COPING WITH UCLA BURN AND SCREW CONNECTION D 5.00
• STUMP PRIMER SYSTEM FOR CEMENTING SRDMM 3 30 TRANSMUCOS OR 1.0 MM TITANIUM
• STUMP PRIMER SYSTEM FOR CEMENTING SRDMM 3.75 TRANSMUCOSAL 1.0 MM TITANIUM
• STUMP PRIMER SYSTEM FOR CEMENTING SRDMM TRANSMUCOSAL 3.75 MM 3 , 0 TITANIUM
• STUMP PRIMER SYSTEM FOR CEMENTING SRDMM TRANSMUCOSAL 4.2 MM 1.0 TITANIUM
• STUMP PRIMER SYSTEM FOR CEMENTING SRDMM TRANSMUCOSAL 4.2 MM 3.0 TITANIUM
• STUMP PRIMER SYSTEM FOR CEMENTING SRDMM TRANSMUCOSAL 4.5 MM 1.0 TITANIUM
• STUMP PRIMER SYSTEM FOR CEMENTING SRDMM TRANSMUCOSAL 4.5 MM 3.0 TITANIUM
• STUMP PRIMER SYSTEM FOR CEMENTING SRDMM TRANSMUCOSAL 5.0 MM 1.0 TITANIUM
• STUMP PRIMER SYSTEM FOR CEMENTING SRDMM TRANSMUCOSAL 5.0 MM 3.0 TITANIUM
• STUMP THE RIGHT CONNECTION WITH SCREW D.4, 20 T1
• STUMP THE RIGHT CONNECTION WITH SCREW D.4, 20 T3
• STUMP THE RIGHT CONNECTION WITH SCREW D.4, 20 T5
• STUMP THE RIGHT CONNECTION WITH SCREW D.4, 50 T1
• STUMP THE RIGHT CONNECTION WITH SCREW D.4, 50 T3
• STUMP THE RIGHT CONNECTION WITH SCREW D.4, 50 T5
• STUMP THE RIGHT CONNECTION WITH SCREW D.5, 00 T1
• STUMP THE RIGHT CONNECTION WITH SCREW D.5, 00 T3
• STUMP THE RIGHT CONNECTION WITH SCREW D.5, 00 T5
• STUMP THE RIGHT TO BLOCK FOR SCREWED PROSTHESIS
• STUMP THE RIGHT WITH SCREW CONNECTION D.3, 30 T1
• STUMP THE RIGHT WITH SCREW CONNECTION D.3, 30 T3
• STUMP THE RIGHT WITH SCREW CONNECTION D.3, 30 T5
• STUMP THE RIGHT WITH SCREW CONNECTION D.3, 75 T1
• STUMP THE RIGHT WITH SCREW CONNECTION D.3, 75 T3
• STUMP THE RIGHT WITH SCREW CONNECTION D.3, 75 T5
• STUMP TO MILL CONNECTION WITH SCREW D FROM 3.30 TO 8
• STUMP TO MILL CONNECTION WITH SCREW D FROM 3.75 TO 11
• STUMP TO MILL CONNECTION WITH SCREW D FROM 3.75 TO 8
• STUMP TO MILL CONNECTION WITH SCREW D FROM 4.20 TO 8
• STUMP TO MILL CONNECTION WITH SCREW D FROM 4.50 TO 8
• STUMP TO MILL RIGHT WITH SCREW CONNECTION D. 3.30
• STUMP TO MILL RIGHT WITH SCREW CONNECTION D. 3.75
• STUMP TO MILL RIGHT WITH SCREW CONNECTION D. 4.2
• STUMP TO MILL RIGHT WITH SCREW CONNECTION D. 4.5
• STUMP TO MILL RIGHT WITH SCREW CONNECTION D. 5
• STUMP TO MILL SCREW CONNECTION WITH A 3.30 ¿11
• STUMP TO MILL SCREW CONNECTION WITH A 4.20 ¿11
• STUMP TO MILL SCREW CONNECTION WITH A 4.50 ¿11
• STUMP TO MILL SCREW CONNECTION WITH A 5.00 ¿11
• STUMP TO MILL SCREW CONNECTION WITH A 5.00 ¿8
• STUMP YOU IN TEMPORARY CONNECTION WITH SCREW D 3.30
• STUMP YOU IN TEMPORARY CONNECTION WITH SCREW D 3.75
• STUMP YOU IN TEMPORARY CONNECTION WITH SCREW D 4.20
• STUMP YOU IN TEMPORARY CONNECTION WITH SCREW D 4.50
• STUMP YOU IN TEMPORARY CONNECTION WITH SCREW D 5.00
• SUPPORT FOR FRESATORE FOR DIGITAL D. 3.75 / 4.2 / 4.5
• SUPPORT FOR MILLING D. DIGITAL 3.3
• SYSTEM PRIMER FOR PROVISIONAL STUMP SRDMM 3.30 TRANSMUCOSAL 1.0 MM
• SYSTEM PRIMER FOR PROVISIONAL STUMP SRDMM 3.75 TRANSMUCOSAL 1.0 MM
• TAPPING - ALL SIZES
• TAPPING SCREW SYSTEM - ALL SIZES
• TAPPING SCREW SYSTEM 3.30
• TAPPING SCREW SYSTEM 4.5
• TAPPING SCREW SYSTEM FOR 3.75
• TEST SYSTEM 5X15 SCREW
• TILLER PILOT LONG
• TRANSFER ENDED SPOON FOOTPRINT WITH SCREW CONNECTION A 3.3 T5
• TRANSFER ENDED SPOON FOOTPRINT WITH SCREW CONNECTION A 4.2
• TRANSFER ENDED SPOON FOOTPRINT WITH SCREW CONNECTION A 4.2 T5
• TRANSFER ENDED SPOON FOOTPRINT WITH SCREW CONNECTION A 4.5
• TRANSFER ENDED SPOON FOOTPRINT WITH SCREW CONNECTION A 4.5 T5
• TRANSFER ENDED SPOON FOOTPRINT WITH SCREW CONNECTION AND COPING 3.75 D T5
• TRANSFER ENDED SPOON FOOTPRINT WITH SCREW CONNECTION AND COPING A 3.3 T5
• TRANSFER ENDED SPOON FOOTPRINT WITH SCREW CONNECTION AND COPING A 4.2 T3
• TRANSFER ENDED SPOON FOOTPRINT WITH SCREW CONNECTION AND COPING A 4.2 T5
• TRANSFER ENDED SPOON FOOTPRINT WITH SCREW CONNECTION AND COPING A 4.5 T3
• TRANSFER ENDED SPOON FOOTPRINT WITH SCREW CONNECTION AND COPING A 4.5 T5
• TRANSFER ENDED SPOON FOOTPRINT WITH SCREW CONNECTION AND COPING D 3.75 T3
• TRANSFER ENDED SPOON FOOTPRINT WITH SCREW CONNECTION AND COPING D 5 T3
• TRANSFER ENDED SPOON FOOTPRINT WITH SCREW CONNECTION AND COPING D 5 T5
• TRANSFER ENDED SPOON FOOTPRINT WITH SCREW CONNECTION AND COPING D.3.30 T3
• TRANSFER ENDED SPOON FOOTPRINT WITH SCREW CONNECTION D 3.30
• TRANSFER ENDED SPOON FOOTPRINT WITH SCREW CONNECTION D 3.75
• TRANSFER ENDED SPOON FOOTPRINT WITH SCREW CONNECTION D 3.75 T5
• TRANSFER ENDED SPOON FOOTPRINT WITH SCREW CONNECTION D 5
• TRANSFER ENDED SPOON FOOTPRINT WITH SCREW CONNECTION D 5 T5
• TRANSFER FOR RESIDUAL LIMB PROSTHESIS FOR RIGHT SCREWED D. 3,75 / 4,2 / 4,5 / 5
• TRANSFER FOR RESIDUAL LIMB PROSTHESIS FOR RIGHT SCREWED D. 3.3
• TRANSFER SIGNATURE LONG SPOON OPEN WITH SCREW CONNECTION A 4.2
• TRANSFER SIGNATURE LONG SPOON OPEN WITH SCREW CONNECTION A 4.5
• TRANSFER SIGNATURE LONG SPOON OPEN WITH SCREW CONNECTION D 3.75
• TRANSFER SIGNATURE LONG SPOON OPEN WITH SCREW CONNECTION D 5
• VYTINA COPING WITH SECOND X CALC AND YOU RIGHT MONC X X PROTI, AND SCREW EX MONC ANG 30 ° X PROT, AND SCREW
• WRENCH RATCHET