Our numbers

• 879.412 medical devices
• 12.856 producers
• 6.771 categories

Medical devices that have in their name the word depth

• PROBE OF DEPTH ' - 129.004
• SCALPEL 2.75 MM DEPTH INDICATOR 'ANGULATED - EG-1127
• SCALPEL 3.0MM GAUGE DEPTH 'ANGULATED - EG-1130
• SCALPEL 3.2MM GAUGE DEPTH 'ANGULATED - EG-1132
• SCALPEL PARALLELO2.75MM INDICATOR DEPTH 'ANGULATED - EG-1327
• SCALPEL PARALLEL 3.0MM GAUGE DEPTH 'ANGULATED - EG-1330
• SCALPEL PARALLEL 3.2MM GAUGE DEPTH 'ANGULATED - EG-1332
• SCALPEL TRAPEZOIDALE 2.85-3.2MM INDICATOR DEPTH 'ANGULATED - EG-2832
• SCALPEL TRAPEZOIDALE 3.0-3.2MM INDICATOR DEPTH 'ANGULATED - EG-3032
• MILLS OF DEEPER DEPTH 'PRIMER SYSTEM FOR EASY TAPPING - P593718
• MILLS OF DEEPER DEPTH 'PRIMER SYSTEM FOR EASY TAPPING - P594218
• MILLING DEPTH 'SYSTEM FOR SHORT PRIMER - P594866
• P. HELICAL Ø 1.7 X 11.9 MM MM WITH ARREST OF DEPTH, AESCULAP® - SHD-DS-A-G1
• GAUGE DEPTH - 0533MP-20
• GAUGE DEPTH 'HOLES FOR PROXIMAL - 9087.10.038
• DONOR PUNCH Ø10.00 MM, DEPTH 'CONTROLLED 0100 MM, FOR PREPARATION DMEK - JD2890FD.XXX
• GAUGE DEPTH - BCM14-504
• TSD2025HD: MILLING DEPTH · 2.5MM HD - TSD2025HD
• DEPTH GAUGE - 503004346
• GAUGE DEPTH ' - H001035XXXX
• TRAUMAONE INSTRUMENTS DEPTH GAGE ​​2.0 / 2.4,45MM, LONG - 01-9125
• DEPTH - DG28
• DEPTH - DG35
• PROBE DEPTH 35 MM TO 57.5 MM / NM-X1028 - NM-X1028
• EXTREMILOCK - 2.7MM DEPTH GAUGE - 320-2528
• EXTREMILOCK - 3.5 / 4.0MM DEPTH GAUGE, ADDITIONAL LENGTH - 320-2536
• EXTREMILOCK - 4.0MM CANNULATED DEPTH GAUGE / COUNTERSINK - 320-2675
• DEPTH PROBE TITANIUM - W2-SOM
• MULTIGEN PLUS - TIBIAL RESECTION DEPTH GAUGE - 9066.25.160
• MULTIGEN PLUS - TIBIAL RESECTION DEPTH GAUGE - 9066.25.162
• MULTIGEN PLUS - TIBIAL RESECTION DEPTH GAUGE - 9066.25.170
• MILLING DEPTH 'TAPER - ALL SIZES - P560000
• MILLING DEPTH 'TAPER - ALL SIZES - P530000
• METER 3D DEPTH ' - 540MA013
• METER DEPTH 'HOLE PROXIMAL - 9087.10.038
• KIT TANK VENTRICULOSTOMY OF LCR WITH GROUP TO RELEASE HOLE DRILL 6MM LOWER DEPTHS - 22050 B
• CGS DEPTH HANDLE - CGS-DH
• CGS DISPOSABLE DEPTH STOP - CGS-DDS
• 1.6 X 110MM DRILL, 20MM WORKING LENGTH, COLOR DEPTH MARKS - 60-16620
• 1.9 X 110MM DRILL, 20MM WORKING LENGTH, COLOR DEPTH MARKS - 60-19620
• 1.5 X 110MM DRILL, 20MM WORKING LENGTH, COLOR DEPTH MARKS - 60-15620
• METAL DEPTH STOP FOR BY 2.7 - DADS27
• ECCENTRIC DISK FOR BLADE SAW, Ø 65MM, FOR LIMITING THE CUTTING DEPTH - 31203-50
• BLADE DEPTH OF CUT FOR AUTOPSY 8MM - 31205-08
• BLADE DEPTH OF CUT FOR AUTOPSY 8MM - 31205-09
• BLADE DEPTH OF CUT FOR AUTOPSY 20MM - 31205-20
• BLADE DEPTH OF CUT FOR AUTOPSY 20MM - 31205-21
• SET BLADE CUT DEPTH FOR AUTOPSY 20MM - 31205-00
• SET BLADE CUT DEPTH FOR AUTOPSY 20MM - 31205-10
• SET BLADE CUT DEPTH FOR AUTOPSY 8MM - 31206-00