Our numbers

• 879.412 medical devices
• 12.856 producers
• 6.771 categories

Medical devices that have in their name the word drill

• MILL / DRILL WITH PLUG BAYONET Ø3.2MM - STS 0415
• MILL / DRILL WITH PLUG BAYONET Ø4.5MM - STS 0420
• MILL / DRILL WITH PLUG BAYONET Ø3.2MM - STSR 0605
• MILL / DRILL WITH PLUG BAYONET Ø4.5MM - STSR 0606
• MILL / DRILL Ø2MM CANNULATED WIRE GUIDE Ø1MM - HMV 311
• DRILL / SCREW FRANGICORTICALE FTS - HMV 472
• MILL / DRILL Ø2.7MM CANNULATED WIRE GUIDE Ø1MM - HMV 353-08
• MILL / DRILL SCREW CANNULATED MHV 450-XXX - HMV 450-000
• COMLPETE NEXGEN KNEE SOLUTIONG.DA COMP.TIB.CON TIP DRILL ROD 15MM - 00-5977-014-02
• MILL / DRILL CANNULATED SCREW MHV 650-XXX - HMV 650-000
• MILL / DRILL Ø2.7MM CANNULATED WIRE GUIDE Ø0.8MM - HMV 413-1
• MILL / DRILL Ø2.7MM CANNULATED WIRE GUIDE PACKAGE Ø0.8MM 3PZ . - HMV 413
• MILL / DRILL Ø4.8MM DISTAL TO NAIL SUPERNAIL CANNULATED - HSN 0321
• MILL / DRILL NAIL FOR DISTAL Ø3.5MM UNINAIL SUPERNAIL AND FULL - HSN 0322
• UNICOMPARTMENTAL ZIMMER KNEE DRILL SYSTEMPUNTA FEM. + PRE-STOP RIVESTIM.DI - 00-5843-018-00
• MILL / DRILL FOR CALIBRATED Ø2.8MM CANNULATED GUIDEWIRE Ø1.5MM - HMV 166-28
• PIN TIP DRILL WITH EYE - 219321
• MILL / DRILL FOR Ø3.5MM CANNULATED GUIDEWIRE Ø2MM - HMV 167-35
• DRILL 3.2MM BONE SCREW FOR - 00-5120-085-00
• MILL / DRILL NAIL FOR DISTAL CANNULATED Ø4.8MM SUPERNAIL LONG- - HSN 0415
• MILL / DRILL FOR CALIBRATED Ø5MM CANNULATED GUIDEWIRE Ø3.2MM - HMV 200-007
• MILL / DRILL CANNULATED CALIBRATED - HMS 7830-XX
• NEXGEN KNEE SOLUTIONGDA DRILL FOR COMPLETE COMP.TIB. STEMMED 1-2 - 00-5977-014-01
• PRC TIB DRILL GUIDE FROM 1 TO 6 SZ-L MEDR-LAT - 00-5841-00X-0X
• GUIDE TO CORE DRILL WITH FIXED MOBILE - THSFB-38-145,TSCFB-35-145-1.5,TSCFB-35-145-15,TSCFB-35-145-3,TSCFB-35-145-7.5,TSCFB-35-180-1.5
• ZIMMERGUIDA MANUAL FOR DRILL - 00-5120-084-00
• CANNULATED CHOPPER 20G, TWO HOLES TO DRILL 1.80MM 120 °, 60 ° ANGLE CUT - J2234.34
• MANIPOLATORE CANNULATED 20G, CLOSED TOE, 2 HOLES, DRILL 100 °, 1.0 MM., - J2234.36
• OVER DRILL GUIDE - 13543
• GUIDE FOR DRILLING - 219967
• CANN. DRILL BIT - 1355570
• DRILL GUIDE POLYAXIAL 2.3/2.7MM - 56-01250
• FIXED ANGLE DRILL GUIDE 2.3/2.7MM - 56-01255
• DRILL GUIDE AND WIRE K. 2.3MM - 56-01260
• SOLID DRILL BIT - 1355070
• DRILL DRILL - 60-23X41
• DRILL GUIDE - 22800
• MILL / DRILL FOR Ø2MM CANNULATED GUIDEWIRE Ø0.8MM DISPOSABLE - HMV 412/1
• MILL / DRILL Ø2MM CANNULATED WIRE GUIDE Ø0.8MM DISPOSABLE PACK OF 3PCS. - HMV 412
• FOR FITTING REAMER DRILL FOR FLEXIBLE - HMK 795-001
• SINGLE PATIENT DRILLS - 229XX
• GUIDE TIP DRILL DOUBLE - 45-X0009
• TIP DRILL FULL - 45-X0011
• TWIST DRILL, DRILL PILOT, CORTICAL DRILL, DRILL CONICAL - 228XX, 242XX, 224XX
• SINGLE PATIENT DRILL KITS - 22898, 22899, 24737
• GUIDE FOR DRILLING PARALLEL - FR514S
• PIECE TAPERED DRILL ROD FOR EASY MIS.1 (PER SIZE 9-10-11-12S-12) - SI 600-001
• PIECE DRILL TAPER SHANK FOR EASY MIS.2 (FOR SIZES 13-14-15) - SI 600-002
• TIP DRILL FULL STERILE - 45-X0011S
• TIP DRILL CANNULATED STERILE DISPOSABLE - 45-X0005S