List of devices falling within Class DEVICES FOR PROSTHETIC DENTISTRY - OTHERS - codice: Q010299
In this list are all medical devices registered by the ministry of health which belong to the class Q010299Click on the letter will appear in the medical devices belonging to the class that start with that letter
- RADIOGRAPHIC INDICATORS
- RATCHET C3
- RATCHET LOAD C1
- RATCHET WRENCH SHORT INTRODUCTION - ACCESSORIES DENTAL IMPLANTS REUSABLE (NS)
- RB IMPRESSION POST CLOSED TRAY, INCL. GUIDE SCREW, L 13MM, TAN
- RC AUXILIARY ELEMENT FOR REGISTRATION OF BITE, 8 MM HEIGHT
- RC AUXILIARY ELEMENT FOR REGISTRATION OF BITE, HEIGHT 12 MM
- RC AUXILIARY OF TRANSFER FOR SECONDARY COMPONENT CEMENTING, Ø 5 MM
- RC AUXILIARY OF TRANSFER FOR SECONDARY COMPONENT CEMENTING, Ø 6.5 MM
- RC CAPPETTA CLOSING - H 0,5 MM, TI
- RC CAPPETTA CLOSING - H 0MM, TI
- RC COMP. SEC. HEALING, BOTTLE FORM D 4.4MM, H 4MM, TI
- RC COMP. SEC. HEALING, BOTTLE FORM D 4.7MM, 6MM H, TI
- RC COMP. SEC. HEALING, CONICAD 6.5MM, 2MM H, TI
- RC COMP. SEC. HEALING, CONICAL 6.5MM D, H 4MM, TI
- RC COMP. SEC. HEALING, TAPER D 6.5MM, 6MM H, TI
- RC COMPONENT SECONDARY PLAN IN GOLD FOR BRIDGE, GH 5.2 MM
- RC COMPONENT SECONDARY PLAN IN GOLD FOR CORONA, GH 3.3 MM
- RC COMPONENT SECONDARY PLAN MULTI-BASE , STRAIGHT, Ø 4,5 MM, GH 4 MM
- RC IMPRESSION COPING FOR COMPONENTS OF SECONDARY CEMENTED, Ø 5 MM, 4 AH MM
- RC IMPRESSION COPING FOR COMPONENTS OF SECONDARY CEMENTED, Ø 6,5 MM, 5,5 MM AH
- RC IMPRESSION COPING FOR COMPONENTS OF SECONDARY CEMENTED, Ø 6,5 MM, AH 4 MM
- RC IMPRESSION COPING OF COMPONENTS FOR SECONDARY CEMENTED, Ø 5 MM, 5.5 MM AH
- RC IMPRESSION COPING OF SECONDARY COMPONENTS FOR MULTI-BASE, RIGHT, Ø 4,5 MM
- RC IMPRESSION COPING OF SECONDARY COMPONENTS FOR MULTI-BASE, RIGHT, Ø 6,5 MM
- RC LOCATOR ® PLAN COMPONENT SECONDARY H 4 MM
- RC NOVALOC PLAN ABUTMENT, 15TH, H2-6, A, POM
- RC PIN FOR IMPRESSION FOR MULTI-COMPONENT SECONDARY BASE, ANGLED 25 °, Ø 4 MM
- RC PIN FOR IMPRESSION FOR MULTI-COMPONENT SECONDARY BASE, RIGHT, Ø 4,5 MM
- RC PIN FOR IMPRESSION FOR MULTI-COMPONENT SECONDARY BASIC LAW, Ø 6,5 MM
- RC PIN FOR IMPRESSION TRAY CLOSED FOR, AND COPING WITH INTEGRATED SCREW GUIDE
- RC PIN FOR IMPRESSION TRAY FOR OPEN INTEGRATED WITH SCREW DRIVING ALONG
- RC PIN FOR IMPRESSION TRAY FOR OPEN INTEGRATED WITH SCREW GUIDE
- RC PLAN ABUTMENTS, 17 °, D 4.6 MM, 2.5 MM GH, POM, A
- RC PLAN ABUTMENTS, 17 °, D 4.6 MM, 2.5 MM GH, POM, B
- RC PLAN ABUTMENTS, 30 °, D 4.6 MM, 2.5 MM GH, POM, A
- RC PLAN ABUTMENTS, 30 °, D 4.6 MM, 2.5 MM GH, POM, B
- RC PLAN ABUTMENTS, STRAIGHT, D 4.6 MM, 2.5 MM GH, POM
- RC PLAN COMPONENT ANATOMIC, ANGLED 15 °, GH 3.5 MM
- RC PLAN COMPONENT ANATOMIC, STRAIGHT, GH 2 MM
- RC PLAN COMPONENT ANATOMIC, STRAIGHT, GH 3.5 MM
- RC PLAN COMPONENT SECONDARY ANATOMICAL, ANGLED 15 °, GH 2 MM
- RC PLAN COMPONENT SECONDARY CEMENTING Ø 6.5 MM, GH 2 MM, AH 4 MM
- RC PLAN COMPONENT SECONDARY CEMENTING, Ø 5 MM, GH 1 MM, 5.5 MM AH
- RC PLAN COMPONENT SECONDARY CEMENTING, Ø 5 MM, GH 1 MM, AH 4 MM
- RC PLAN COMPONENT SECONDARY CEMENTING, Ø 5 MM, GH 2 MM , AH 5.5 MM
- RC PLAN COMPONENT SECONDARY CEMENTING, Ø 5 MM, GH 2 MM, AH 4 MM
- RC PLAN COMPONENT SECONDARY CEMENTING, Ø 5 MM, GH 3 MM 4 MM AH
- RC PLAN COMPONENT SECONDARY CEMENTING, Ø 5 MM, GH 3 MM, 5.5 MM AH
- RC PLAN COMPONENT SECONDARY CEMENTING, Ø 6,5 MM 1 MM GH, AH 4 MM
- RC PLAN COMPONENT SECONDARY CEMENTING, Ø 6,5 MM, GH 2 MM 5.5 MM AH
- RC PLAN COMPONENT SECONDARY CEMENTING, Ø 6,5 MM, GH 3 MM 4 MM AH
- RC PLAN COMPONENT SECONDARY CEMENTING, Ø 6,5 MM, GH 3 MM, 5.5 MM AH
- RC PLAN COMPONENT SECONDARY CEMENTING, Ø 6.5 MM, 1 MM GH, AH 5, 5 MM
- RC PLAN MULTI-COMPONENT SECONDARY BASE, ANGLED 25 °, TYPE A, Ø 4 MM, 2.5 MM GH
- RC PLAN MULTI-COMPONENT SECONDARY BASE, ANGLED 25 °, TYPE B, Ø 4 MM, 2.5 MM GH
- RC PLAN MULTI-COMPONENT SECONDARY BASE, STRAIGHT, Ø 4.5 MM, 1 MM GH
- RC PLAN MULTI-COMPONENT SECONDARY BASE, STRAIGHT, Ø 4.5 MM, 2.5 MM GH
- RC PLAN MULTI-COMPONENT SECONDARY BASE, STRAIGHT, Ø 6,5 MM, GH 4 MM
- RC PLAN MULTI-COMPONENT SECONDARY BASE, STRAIGHT, Ø 6.5 MM 2.5 MM GH
- RC PLAN MULTI-COMPONENT SECONDARY BASE, STRAIGHT, Ø 6.5 MM, GH 1 MM
- RC SECONDARY PLAN COMPONENT LOCATOR ®, H 1 MM
- RC SECONDARY PLAN COMPONENT LOCATOR ®, H 2 MM
- RC SECONDARY PLAN COMPONENT LOCATOR ®, H 3 MM
- RC SECONDARY PLAN COMPONENT LOCATOR ®, H 5 MM
- RC SECONDARY PLAN COMPONENT LOCATOR ®, H 6 MM
- RC STRAUMANN BODY SCAN ®, PEEK / TAN
- RD CAPPETTA OF CHIUSURAØ 4.8MM, H 0MM, TI
- RD CAPPETTA OF GUARIGIONEØ 5.2MM, 2MM H, TI
- RD CAPPETTA OF GUARIGIONEØ 5.2MM, 3MM H, TI
- RD UCLA GOLD / PLAS SLV, NONHEX
- REAR RIGHT RIGHT IN-KONE¿ UNIVERSAL POST SCREW, ¿6.5 MM, A = 1.5 +
- REAR RIGHT RIGHT IN-KONE¿ UNIVERSAL POST SCREW, ¿6.5 MM, A = 2.2 + SCREW
- REAR RIGHT RIGHT IN-KONE¿ UNIVERSAL POST, ¿5 MM, A = 4 +
- RECTANGULAR ZIRCODENT 42X20X16
- REGULAR ABUTMENT NOT ROT INCL 15 DEGREE H1,5
- REGULAR ABUTMENT NOT ROT INCL 15 DEGREE H3
- REGULAR ABUTMENT NOT ROT INCL 22,5 DEGREE H0,75
- REGULAR ABUTMENT NOT ROT INCL 22,5 DEGREE H1,5
- REGULAR ANGLED ABUTMENT 15¿
- REGULAR NON ROT ABUTMENT H0.75
- REGULAR NON ROT ABUTMENT H1.5 REGULAR NON ROT ABUTMENT
- REGULAR NON ROT ABUTMENT H4.5
- REGULAR ROT ABUTMENT H1.5 REGULAR ROT ABUTMENT
- REGULAR ROT ABUTMENT H4.5
- REGULAR ROT ABUTMENT INCL 15 DEGREE H3
- REGULAR ROT ABUTMENT INCL 15 DEGREE H4.5
- REGULAR ROT ABUTMENT INCL 15 DEGREES H0.75
- REGULAR ROT ABUTMENT INCL 15 DEGREES H1.5
- REGULAR ROT ABUTMENT INCL 22.5 DEGREE H1.5
- REGULAR ROT ABUTMENT INCL 22.5 DEGREE H3
- REGULAR ROT ABUTMENT INCL 22.5 DEGREE H4.5
- REGULAR ROT ABUTMENT INCL 22.5 DEGREES H0.75
- REGULAR ROT H0 ABUTMENT , 75
- REGULAR TYPE FINGERPRINT DOOR WITH SMOOTH EDGE RETENTIVE - SET OF 10
- REN SDI / RDI 00:48 COP SCR DET ABUT
- REPLACEMENT BLACK CAP ( 4UNITS)
- REPLICA LOW PROFILE 0 ° DIAM. 4.1
- REPLICA LOW PROFILE 0 ° DIAM. 4.1
- REPLICA LOW PROFILE 0 ° DIAM. 5.0
- REPLICA LOW PROFILE 17 ° DIAM. 4.1
- REPLICA LOW PROFILE 17 ° DIAM. 5.0
- REPLICA LOW PROFILE 30 ° DIAM. 3.4
- REPLICA LOW PROFILE 30 ° DIAM. 3.4
- REPLICA LOW PROFILE 30TH DIAM. 4.1
- REPLICA LOW PROFILE 30TH DIAM. 5.0
- RESIDUAL LIMB ROTATIONAL 33MCR
- RESIDUAL LIMB ROTATIONAL 33MTR
- RESIDUAL LIMB ROTATIONAL 38MCR
- RESIDUAL LIMB ROTATIONAL 38MTR
- RESIDUAL LIMB ROTATIONAL 45MCR
- RESIDUAL LIMB ROTATIONAL 45MTR
- RESIDUAL RIGHTS 38
- RESINS IN DENTAL PEEK TAKAY. GRANULAR OR DISCS.
- RESTORE RD SURGICAL TAP
- RESTRAY NF
- RETENTION CAP - ACCESSORIES FOR DENTAL IMPLANTS (S)
- RETENTION OF TITANIUM SCREWS
- RETENTION PIN FOR SELECTION ABUTMENTS
- RETENTION REPLACEMENT CLEAR (4 UNITS)
- RETENTION REPLACEMENT PINK (4 UNITS)
- RETENTION REPLACEMENT PURPLE (4UNITS)
- RETENTION REPLACEMENT YELLOW (4UNITS)
- RETENTION SCREW FOR PILLAR FOR TEMPORARY WELDING
- RETENTION SCREW IN GOLD
- RETENTION SCREW M1.6 ES 1:20
- RETENTION SCREW M1.8 ES 1:20
- RETENTION.SIL
- RETENTIVE CAP FOR BALL - MODEL CLOSED
- RETENTIVE CAP MINI IMPLANT
- RETENTIVE CAP OPEN
- RIDER, ROUND BAR
- RIGHT ABUTMENT ESAG.INTERNO - D.4 H.1MM LIMITED 2
- RIGHT ABUTMENT ESAG.INTERNO - D.4 H.2MM LIMITED 2
- RIGHT ABUTMENT ESAG.INTERNO - D.4 H.3MM LIMITED 2
- RIGHT ABUTMENT ESAG.INTERNO - D.4 H.4MM LIMITED 2
- RIGHTS AND DIE ANGLE CONNECTION OTTAGONALE
- RING BEAUTY ANG. 17TH D.4,0 COMP. BRK
- RING BEAUTY ANG. 30 ° D.4,0 COMP. BRK
- RING BWB
- RING BWB
- RN CAPPETTA CLOSING BIG, H 1.5MM, TI
- RN CAPPETTA CLOSING SMALL, WE
- RN CARES MONO SCANBODIES
- RN HEALING CAP, H 2.0MM, TI
- RN HEALING CAP, H 3.0MM, TI
- RN HEALING CAP, H 4.5MM, TI
- RN HEALING CAP, TILT. SHORT LIP, H 2MM, TI
- RN HEALING CAP, TILT. SHORT LIP, H 3.5MM, TI
- RN IMPRESSION COPING WITH SNAP SNAP-ON
- RN IMPRESSION SET FOR SOLID ABUTMENT 048.541, H 5.5MM, POM / AL
- RN IMPRESSION SET FOR SOLID ABUTMENT 048.542, H 7MM, POM / AL
- RN PLAN LOCATOR ABUTMENTS 6MM H
- RN PLAN LOCATOR ABUTMENTS H 1MM
- RN PLAN LOCATOR ABUTMENTS H 2MM
- RN PLAN LOCATOR ABUTMENTS H 3MM
- RN PLAN LOCATOR ABUTMENTS H 4MM
- RN PLAN LOCATOR ABUTMENTS H 5MM
- RN RN CYLINDER POSITION & CAP FOR SIGNATURE, EH H 12MM 8MM, POM
- RN SOLID PLAN ABUTMENTS, H 4MM
- RN SOLID PLAN ABUTMENTS, H 5.SMM
- RN SOLID PLAN ABUTMENTS, H 7MM
- RN STRAUMANN BODY SCAN ®, PEEK / TI
- RN SYNOCTA 1.5 SCREW-RETAINED PLAN ABUTMENTS
- RN SYNOCTA ANGLED PLAN ABUTMENTS, SHORT, IYPE B, ANGLED 20 °
- RN SYNOCTA ANGLED PLAN ABUTMENTS, SHORT, TYPE A, ANGLED 20 °
- RN SYNOCTA ANGLED PLAN ABUTMENTS, SHORT, TYPE B, ANGLED 15 °
- RN SYNOCTA ANGLED PLAN ABUTMENTS, TYPE A, ANGLED 15 °
- RN SYNOCTA ANGLED PLAN ABUTMENTS, TYPE A, ANGLED 20 °
- RN SYNOCTA ANGLED PLAN ABUTMENTS, TYPE B, ANGLED 15 °
- RN SYNOCTA ANGLED PLAN ABUTMENTS, TYPE B, ANGLED 20 °
- RN SYNOCTA CEMENTABLE PLAN ABUTMENTS
- RN SYNOCTA CYLINDER POSITION, RED
- RN SYNOCTA FOOTPRINT FOR TRANSFER SCREW MANUAL, RED
- RN SYNOCTA TRANSFER OF PRINTS FOR BUILDING A BAR WITH 048 601
- RN SYNOCTA TRANSVERSAL PLAN ABUTMENTS
- ROCATEC PLUS
- ROCATEC PLUS
- ROCATEC SOFT
- ROCATEC SOFT
- ROCATEC SOFT - MATERIAL COATING
- ROCATEC SOFT - MATERIAL COATING
- ROTARY CONVERTER FOR BONDING 3.4 D.
- ROTARY CONVERTER FOR BONDING 4.0 D.
- ROTARY CONVERTER FOR BONDING 4.1 D.
- ROTARY CONVERTER FOR BONDING D.3 5
- ROTARY CONVERTER FOR BONDING D.4 8
- ROTARY CONVERTER FOR BONDING D.4, 5
- ROTARY INTERNAL TRANSFER PICK UP ES
- ROTATING BASE GOLD ES EST
- ROTATING BASE GOLD ES INT
- ROTATING CASTABLE COMP.ACTIVE Ø 3.50 NP
- ROTATING CASTABLE COMP.ACTIVE Ø 4.30 / 5.00 RP
- ROTATING HANDLES HIGH SCALING SCREW IN-KONE PLATFORM ¿6.5 MM, H = 4 MM
- ROTATING MULTI-SCAN ABUTMENT H. 0.5 + SCREW
- ROTATING MULTI-SCAN ABUTMENTS H. 2 + SCREW
- ROTATING MULTI-SCAN ABUTMENTS H. 3 + SCREW
- ROTATING OPEN TRAY TRANSFER
- ROTATING SCANBASE H.1 D. 3 + SCREW
- ROTATING SCANBASE H.2 D. 3 + SCREW
- ROTATING SCANBASE H.3 D.3 + SCREW
- ROTATION CONNECTOR Ø 3.8MM
- ROUND BAR
- ROUND HEAD MINI IMPLANT ANALOG
- RP LIVES THROUGH WP-D4, 3 TO 5.0
Medical Devices