List of devices falling within Class DRILLS AND BURS - codice: L1104
In this list are all medical devices registered by the ministry of health which belong to the class L1104Click on the letter will appear in the medical devices belonging to the class that start with that letter
- D7 DIAMOND CUTTER, 0MM/ISO 070 2.35 X125
- D7 DIAMOND CUTTER, 0MM/ISO 070 2.35 X70
- D7 DIAMOND CUTTER, 0MM/ISO 070 2.35 X95
- DENSE DRILL
- DENSE DRILL
- DENSE DRILL
- DENSE DRILL
- DIA TWIST DRILL 4:25 * 10
- DIAMOND BALL 0.5MM, EXT
- DIAMOND BALL 1.2MM, EXT
- DIAMOND BALL 1.5MM C, 120/140
- DIAMOND BALL 1.5MM, EXT
- DIAMOND BALL 1.5MM, EXTENDED
- DIAMOND BALL 1.5MM, STD
- DIAMOND BALL 1.5MM, STD
- DIAMOND BALL 1.5MM, STD
- DIAMOND BLADE, Ø 25.4 MM
- DIAMOND BLADE, Ø 25.4 MM
- DIAMOND BURR, Ø 0.6 MM, 7 CM
- DIAMOND BURR, Ø 0.7 MM, 7 CM
- DIAMOND BURR, Ø 0.8 MM, 7 CM
- DIAMOND BURR, Ø 1 MM, 7 CM
- DIAMOND BURR, Ø 1.4 MM, 7 CM
- DIAMOND BURR, Ø 1.8 MM, 7 CM
- DIAMOND BURR, Ø 2.3 MM, 7 CM
- DIAMOND BURR, Ø 2.7 MM, 7 CM
- DIAMOND BURR, Ø 3.1 MM, 7 CM
- DIAMOND BURR, Ø 3.5 MM, 7 CM
- DIAMOND BURR, Ø 4 MM, 7 CM
- DIAMOND BURR, Ø 4.5 MM, 7 CM
- DIAMOND BURR, Ø 5 MM, 7 CM
- DIAMOND BURR, Ø 7 MM, 7 CM
- DIAMOND BURR, Ø6 MM, 7 CM
- DIAMOND CUTTER D0, 6MM/ISO 006 2.35 X70
- DIAMOND CUTTER D0, 7MM/ISO 007 2.35 X70
- DIAMOND CUTTER D0, 8MM/ISO 008 2.35 X70
- DIAMOND CUTTER D1, 0MM/ISO 010 2.35 X70
- DIAMOND CUTTER D1, 4MM/ISO 014 2.35 X125
- DIAMOND CUTTER D1, 4MM/ISO 014 2.35 X51
- DIAMOND CUTTER D1, 4MM/ISO 014 2.35 X70
- DIAMOND CUTTER D1, 4MM/ISO 014 2.35 X95
- DIAMOND CUTTER D1, 8MM/ISO 018 2.35 X125
- DIAMOND CUTTER D1, 8MM/ISO 018 2.35 X51
- DIAMOND CUTTER D1, 8MM/ISO 018 2.35 X70
- DIAMOND CUTTER D1, 8MM/ISO 018 2.35 X95
- DIAMOND CUTTER D2, 3MM/ISO 023 2.35 X125
- DIAMOND CUTTER D2, 3MM/ISO 023 2.35 X51
- DIAMOND CUTTER D2, 3MM/ISO 023 2.35 X70
- DIAMOND CUTTER D2, 3MM/ISO 023 2.35 X95
- DIAMOND CUTTER D2, 7MM/ISO 027 2.35 X125
- DIAMOND CUTTER D2, 7MM/ISO 027 2.35 X51
- DIAMOND CUTTER D2, 7MM/ISO 027 2.35 X70
- DIAMOND CUTTER D2, 7MM/ISO 027 2.35 X95
- DIAMOND CUTTER D3, 1MM/ISO 031 2.35 X125
- DIAMOND CUTTER D3, 1MM/ISO 031 2.35 X51
- DIAMOND CUTTER D3, 1MM/ISO 031 2.35 X70
- DIAMOND CUTTER D3, 1MM/ISO 031 2.35 X95
- DIAMOND CUTTER D3, 5MM/ISO 035 2.35 X125
- DIAMOND CUTTER D3, 5MM/ISO 035 2.35 X51
- DIAMOND CUTTER D3, 5MM/ISO 035 2.35 X70
- DIAMOND CUTTER D3, 5MM/ISO 035 2.35 X95
- DIAMOND CUTTER D4, 0MM/ISO 040 2.35 X125
- DIAMOND CUTTER D4, 0MM/ISO 040 2.35 X51
- DIAMOND CUTTER D4, 0MM/ISO 040 2.35 X70
- DIAMOND CUTTER D4, 0MM/ISO 040 2.35 X95
- DIAMOND CUTTER D4, 5MM/ISO 045 2.35 X125
- DIAMOND CUTTER D4, 5MM/ISO 045 2.35 X51
- DIAMOND CUTTER D4, 5MM/ISO 045 2.35 X70
- DIAMOND CUTTER D4, 5MM/ISO 045 2.35 X95
- DIAMOND CUTTER D5, 0MM/ISO 050 2.35 X125
- DIAMOND CUTTER D5, 0MM/ISO 050 2.35 X51
- DIAMOND CUTTER D5, 0MM/ISO 050 2.35 X70
- DIAMOND CUTTER D5, 0MM/ISO 050 2.35 X95
- DIAMOND DISC, Ø 17 MM
- DIAMOND DISC, Ø 17 MM
- DIAMOND DRILL
- DIAMOND DRILL
- DIAMOND DRILL
- DIAMOND DRILL
- DIAMOND DRILL
- DIAMOND DRILL
- DIAMOND DRILL
- DIAMOND DRILL
- DIAMOND DRILL
- DIAMOND DRILL
- DIAMOND DRILL
- DIAMOND DRILL
- DIAMOND DRILL
- DIAMOND DRILL
- DIAMOND DRILL
- DIAMOND DRILL
- DIAMOND DRILL
- DIAMOND DRILL
- DIAMOND DRILL
- DIAMOND DRILL
- DMND MATCHSTICK 3.2MM COARSE
- DRILL
- DRILL
- DRILL
- DRILL
- DRILL
- DRILL
- DRILL
- DRILL
- DRILL
- DRILL
- DRILL
- DRILL
- DRILL
- DRILL 1.7MM DIAMETER 14.5CM F PRE-DRILLING
- DRILL 1.7MM X 11.9MM W / DP STOP
- DRILL 10MM FICAT
- DRILL 12MM FICAT
- DRILL 2.7MM DIAMETER 100MM
- DRILL 3.2MM X 5MM W / STOP
- DRILL 3.5MM DIAMETER 145MM
- DRILL ALBEE
- DRILL ALBEE
- DRILL BIT, 100MM
- DRILL BIT, 95MM 3.0MM TWIST
- DRILL BITS FOR HUDSON COD. KO 152.00
- DRILL BITS FOR STILLE COD.KO 144.00
- DRILL BORCHARDT
- DRILL BURR SET CPL FIG 1 -9
- DRILL CANN FOUR-FLUTED
- DRILL CANN FOUR-FLUTED
- DRILL CANN FOUR-FLUTED
- DRILL CANN FOUR-FLUTED
- DRILL CANN FOUR-FLUTED
- DRILL COOLED STAGE X 08 Ø5.0
- DRILL D: 2.7MM L: 160MM FOR LIVES THROUGH D: 3.5MM
- DRILL D: 3.2MM L: 160MM FOR LIVES THROUGH D: 4.5MM
- DRILL D: 3.5MM L: 160MM FOR LIVES THROUGH D: 3.5MM
- DRILL D: 4.5MM L: 160MM FOR LIVES THROUGH D: 4.5MM
- DRILL D: 5.0MM L: 160MM FOR LIVES THROUGH D: 7.0MM
- DRILL DEPTH CONTROL CODMAN
- DRILL DOYEN
- DRILL DOYEN
- DRILL DOYEN
- DRILL DOYEN
- DRILL DRILL BIT 1.5MM, 70MM
- DRILL FOR 1.55MM 2.0MM SCREW
- DRILL FOR DRILLING CODMAN MCKENZIE
- DRILL GUIDE-D: 2.0MM AND SIGHT 3 TROUS
- DRILL GUIDE-D: 3.2 & 4.5MM WITH 2 INSERTS
- DRILL GUIDE-D: 3.2MM L: 40MM
- DRILL GUIDE-D: 3.2MM L: 60MM
- DRILL GUIDE-D: 3.2MM TO 16MM AND TENSIONER 8
- DRILL HANDLE IT TD: 2.7MM GRADUÉ
- DRILL HANDLE IT TD: 3.5MM 1.25MM PAS GRADUÉ
- DRILL HANDLE IT TD: 3.5MM 1.75MM PAS GRADUÉ
- DRILL HANDLE IT TD: 4.0MM GRADUÉ
- DRILL HANDLE IT TD: 4.5MM LONG MODEL GRADUÉ
- DRILL HANDLE IT TD: 6.5MM GRADUÉ
- DRILL INSERT 1.2X10.5MM F SCREWS 1.5MM Ø
- DRILL INSERT Ø 1.5MM
- DRILL INSERT Ø 2.1MM
- DRILL MANUAL CODMAN BUNNELL
- DRILL MANUAL CODMAN CHILDREN `S HOSPITAL
- DRILL PART D: 2MM
- DRILL PART D: 3MM
- DRILL PART D: 4MM
- DRILL QUICK FREEZE ILLAGE AO Q: 1.5MM
- DRILL QUICK FREEZE ILLAGE AO Q: 2.0MM
- DRILL QUICK FREEZE ILLAGE AO Q: 2.7MM
- DRILL QUICK FREEZE ILLAGE AO Q: 3.5MM / PAS 1.25 (CORTICAL)
- DRILL QUICK FREEZE ILLAGE AO Q: 3.5MM / PAS 1.75 (SPONGIEUX)
- DRILL QUICK FREEZE ILLAGE AO Q: 4.0MM / PAS 1.75 (SPONGIEUX)
- DRILL QUICK FREEZE ILLAGE AO Q: 4.5MM LONG MODEL
- DRILL QUICK FREEZE ILLAGE AO Q: 4.5MM MODEL COURT
- DRILL QUICK FREEZE ILLAGE AO Q: 6.5MM
- DRILL SCREW
- DRILL THREE-FLUTED Ø 2.5MM
- DRILL THREE-FLUTED Ø 3.2MM
- DRILL TOTI
- DRILL WITH HANDLE FOR LIVES THROUGH D EN T: 3.5MM
- DRILL WITH HANDLE FOR LIVES THROUGH D EN T: 4.5MM
- DRILL WITH HANDLE FOR LIVES THROUGH D EN T: 7.0MM
- DRILL Ø 1.1MM 45MM
- DRILL Ø 1.1MM 60MM
- DRILL Ø 2.0MM 100MM
- DRILL Ø 2.5MM 110MM
- DRILL Ø 2.5MM 95MM
- DRILL Ø 2.7MM 125MM
- DRILL Ø 3.2MM 130MM
- DRILL Ø 3.2MM 145MM
- DRILL Ø 3.5MM 195MM
- DRILL Ø 4.5MM 145MM
- DRILL Ø 4.5MM 180MM
- DRILL Ø3.5 X15 COOLED STAGE
- DRILL Ø3.5X10 STAGE
- DRILL Ø3.5X13 STAGE
- DRILL Ø4.0 STAGE COOLED X10
- DRILL Ø4.0X15 STAGE
- DRILL Ø4.25X20 TWIST
- DRILL, DRILL HAND HUDSON 270MM.
- DRILL, DRILL HAND STILLE 200 MM / 8
- DRILL-FORM-DRUM., RIV.DIAM., EXTRA-LARGE, Ø 4.0MM, 5.0MM L-HEAD, P / QD11
- DRILL: 2036-FO-250-III
- DRILL: 2036-FO-III-TY-Z
- DRILLING MANUAL
- DRILLING, Ø 12.6 MM
- DRILLING, Ø 12.6 MM X 10.4 MM, 3 GROOVED.
- DRILLING, Ø 9.5 MM
- DRUM 10MM X 14MM (SIDE CUT)
- DRUM 6MM X 8MM FLUTED
Medical Devices