List of devices falling within Class PROSTHESES, FACIAL AND ODONTOLOGICAL - ACCESSORIES - codice: P0180
In this list are all medical devices registered by the ministry of health which belong to the class P0180Click on the letter will appear in the medical devices belonging to the class that start with that letter
- SBIDH: MOUNTER FOR CONTRA FOR SYSTEMS SINGLE-STAGE 5.7 MM
- SCAN ABUTMENTS PROWIDE
- SCAN ABUTMENTS SM Ø 3.3
- SCAN ABUTMENTS SM Ø 3.6
- SCAN ABUTMENTS SM Ø 4
- SCAN ABUTMENTS SM Ø 4.5
- SCAN ABUTMENTS SM Ø 5
- SCAN BODY FOR PLANT HEX INT LP
- SCAN BODY FOR PLANT HEX INT SP
- SCAN BODY FOR PLANT INSTALLATIONS O HEX INT MP
- SCAN FOR BODY SYSTEM HEX TAPER INT SP
- SCAN FOR BODY SYSTEM INT HEX ARBOR LP
- SCAN FOR BODY SYSTEM INT HEX ARBOR MP
- SCANBODIES MULTI-UNIT
- SCANBODIES MULTI-UNIT
- SCANPEG - 5 PCS.
- SCREW
- SCREW
- SCREW 3.3 MM
- SCREW 4.1 / 4.3 MM
- SCREW 5.0 MM
- SCREW ABUTMENT A BALL (OTK) Ø4.7 H2
- SCREW ABUTMENT OVERCASTING Ø3.3-3.7 H3 30 °
- SCREW ABUTMENT OVERCASTING Ø4.7
- SCREW ABUTMENT OVERCASTING Ø4.7 CR / CO
- SCREW ABUTMENT STRAIGHT ø3.3 / 3.7 H0
- SCREW ABUTMENT STRAIGHT ø3.3 / 3.7 H1
- SCREW ABUTMENT STRAIGHT ø3.3 / 3.7 H2
- SCREW ABUTMENT TEMPORARY NOT ROTATING ¿4.7
- SCREW ANGULATED
- SCREW ANTI-ROTATION FOR 0.5 MM SCREW ABUTMENTS - PROSTHETICS
- SCREW ANTI-ROTATION FOR 1.5 MM SCREW ABUTMENTS - PROSTHETICS
- SCREW ANTI-ROTATION FOR 2.5 MM SCREW ABUTMENTS - PROSTHETICS
- SCREW BALL ABUTMENT A H 4
- SCREW BALL ABUTMENTS USER
- SCREW BDS
- SCREW BMK SYST RP GUIDED LABORATORY
- SCREW BMK SYST WP GUIDED LABORATORY
- SCREW CAP
- SCREW CAP FOR STUMP MM CONICAL NEOTORQUE4.1
- SCREW CAP FOR STUMP MM CONICAL NEOTORQUE5.0
- SCREW CAP FOR STUMP TAPER MINI NEOTORQUE4.1 MM
- SCREW CAP FOR STUMP TAPER MINI NEOTORQUE5.0 MM
- SCREW CAPPETTA STUMP CONICO4.1 MM
- SCREW CAPPETTA STUMP CONICO5.0 MM
- SCREW CAPPETTA STUMP MM CONICAL MINI4.1
- SCREW CAPPETTA STUMP MM CONICAL MINI5.0
- SCREW CLOSURE FOR STUMP ANGULATED HEX EST
- SCREW CLOSURE FOR STUMP ANGULATED HEX INT
- SCREW CLOSURE FOR TRANSFER TO THREE SECTIONS
- SCREW CLOSURE WITH STELLA FOR PROSTHETIC HEX INT
- SCREW CLOSURE WITH STELLA FOR PROSTHETIC TYPE LP
- SCREW CLOSURE WITH STELLA FOR PROSTHETIC TYPE MP
- SCREW CLOSURE WITH STELLA FOR PROSTHETIC TYPE SP
- SCREW CLOSURE WITH STELLA FOR TRANSFER INTERNAL HEX
- SCREW CLOSURE WITH STELLA FOR TRANSFER TYPE LP
- SCREW CLOSURE WITH STELLA FOR TRANSFER TYPE MP
- SCREW CLOSURE WITH STELLA FOR TRANSFER TYPE SP
- SCREW CM
- SCREW CONNECTION
- SCREW CONNECTION ASTRA-LINE
- SCREW CONNECTION BIOSPHERE
- SCREW CONNECTION COMPONENTS MUA
- SCREW CONNECTION FOR TRANSFER FC IMPLANT
- SCREW CONNECTION FRIA
- SCREW CONNECTION OS
- SCREW CONNECTION STRAU
- SCREW CONNECTION SYSTEM
- SCREW COVER
- SCREW DIE FAST SM
- SCREW DIE SM Ø 3, 3
- SCREW DIE SM Ø 3.6 - Ø 4.0
- SCREW DIE SM Ø 4.5 Ø 5.0
- SCREW EXTRACTION EOS
- SCREW FOR ABUTMENT
- SCREW FOR ABUTMENT
- SCREW FOR BAR ABUTMENTS, IMPR. TAKING OPEN TRAY A. SOLID. AID
- SCREW FOR BEAUTY SM STUMP DIAMETER FROM 3.6 TO 4
- SCREW FOR BEAUTY STUMP SM Ø 4.5-5
- SCREW FOR COMPLETE
- SCREW FOR COMPONETS PA
- SCREW FOR MULTI-UNIT
- SCREW FOR MULTI-UNIT BRIDGE
- SCREW FOR MULTI-UNIT BRIDGE
- SCREW FOR MULTI-UNIT BRIDGE
- SCREW FOR ROUND SCREW ABUTMENTS - PROSTHETICS
- SCREW FOR STUMP FOR BARS SM SM Ø 3.6 -4 HT 1.5
- SCREW FOR STUMP FOR BARS SM SM Ø 3.6 TO 4 HT 3
- SCREW FOR STUMP FOR BARS SM SM Ø 4.5-5 HT 1.5
- SCREW FOR STUMP FOR BARS SM SM Ø 4.5-5 HT 3
- SCREW FOR STUMP FOR CONIX SM SM SM AND AXIAL Ø6
- SCREW FOR TRANSFER
- SCREW HEALING
- SCREW HEALING COUNTERSUNK PROWIDE Ø7 H.2
- SCREW HEALING COUNTERSUNK PROWIDE Ø7 H.4
- SCREW HEALING COUNTERSUNK PROWIDE Ø7 H.6
- SCREW HEALING COUNTERSUNK Ø 6 PROWIDE H.2
- SCREW HEALING COUNTERSUNK Ø 6 PROWIDE H.4
- SCREW HEALING COUNTERSUNK Ø 6 PROWIDE H.6
- SCREW HEALING EOS
- SCREW HEALING H 4 FOR CONOMETRIC SP
- SCREW HEALING H3 PLANT HEX INT ARBOR MP
- SCREW HEALING H4 PLANT HEX INT ARBOR MP
- SCREW HEALING H4 PLANT HEX INT ARBOR SP
- SCREW HEALING STERILE
- SCREW HEX SYSTEM FOR HEALING H 2 INT LP
- SCREW HEX SYSTEM FOR HEALING H 2 MP EST
- SCREW HEX SYSTEM FOR HEALING H 3 INT MP
- SCREW HEX SYSTEM FOR HEALING H 3 INT SP
- SCREW HEX SYSTEM FOR HEALING H 3 MP EST
- SCREW HEX SYSTEM FOR HEALING H 3 SP EST
- SCREW HEX SYSTEM FOR HEALING H 4 INT LP
- SCREW HEX SYSTEM FOR HEALING H 4 INT MP
- SCREW HEX SYSTEM FOR HEALING H 4 INT SP
- SCREW HEX SYSTEM FOR HEALING H 4 MP EST
- SCREW HEX SYSTEM FOR HEALING H 5 INT MP
- SCREW HEX SYSTEM FOR HEALING H 5 INT SP
- SCREW HEX SYSTEM FOR HEALING H 5.5 MP EST
- SCREW HEX SYSTEM FOR HEALING H 7 INT MP
- SCREW HEX SYSTEM FOR HEALING H 7 INT SP
- SCREW HEX SYSTEM FOR HEALING H 7 MP EST
- SCREW IMPLANT HEALING FC
- SCREW IN TITANIUM
- SCREW INCLINED ABUTMENT Ø3.3-3.7 10 °
- SCREW INCLINED ABUTMENT Ø4.7 10 °
- SCREW INCLINED ABUTMENT Ø4.7 15 °
- SCREW LAB AXIN M1.6 H2 BL AXIOM
- SCREW LINGUAL M1 .4
- SCREW LOBO-ORAL OR
- SCREW LOCKING HEX EST FOR TYPE LP
- SCREW LOCKING HEX EST FOR TYPE MP
- SCREW LOCKING HEX FOR INT TYPE LP
- SCREW LOCKING HEX FOR INT TYPE MP
- SCREW LOCKING HEX FOR INT TYPE SP
- SCREW LOCKING HEX FOR TYPE SP EST
- SCREW LOCKING PROTEO
- SCREW LONG M 1.8
- SCREW M 1.6 FOR HEX EST SP
- SCREW M 1.8
- SCREW M 2.0 FOR HEX EST MP
- SCREW M1.6 LINGUAL
- SCREW M2 PROWIDE
- SCREW MICROSTAND
- SCREW MICROSYS
- SCREW MICROTEMP
- SCREW MOUNT / ABUTMENTS Ø 3, 6 - Ø4
- SCREW MOUNT / ABUTMENTS Ø4, 5-5
- SCREW MUA INCLINED 30 ° H 4
- SCREW MUA INCLINED 30 ° H 5
- SCREW MUA STRAIGHT H 1
- SCREW MULTI-UNIT 5/PKG LAB
- SCREW NEO GM
- SCREW NEO GM
- SCREW NEO GM NEOTORQUE
- SCREW NEOTORQUE3.3 MM
- SCREW NEOTORQUE4.1 / 4.3 MM
- SCREW NEOTORQUE5.0 MM
- SCREW OF HEALING H 3 FOR HEX INT
- SCREW OF HEALING H 4 FOR HEX INT IMPLANT
- SCREW OF HEALING H3 FOR SYSTEM HEX INT CONICAL LP
- SCREW PLUG BIOSPHERE
- SCREW PLUG LONG
- SCREW PLUG PLANTS UNIGRIP
- SCREW PLUG SHORT
- SCREW PLUG STANDARD
- SCREW PLUG STERILE
- SCREW PLUG-BRANE EXAGON
- SCREW PROSTHETIC BIDOIA
- SCREW REMOVAL KIT NOBRPL
- SCREW REMOVER ABUTMENTS SYST RP M2 BMK
- SCREW RETENTION
- SCREW RETENTION
- SCREW ROTARY ABUTMENT TEMPORARY ¿4.7
- SCREW SCREW CONNECTION FOR TRANSFER TRANSMUCOSAL
- SCREW SCREW CONNECTION OF UNIQUE - PURPLE ANODIZED
- SCREW SCREW HEALING H 2
- SCREW SCREW HEALING Ø4.7 H4
- SCREW SCREW OF HEALING Ø4.7 H1
- SCREW SM FOR STUMP FOR BARS H. 1.5 CONIX FOR AXIAL AND SM SM Ø 6.0
- SCREW SM FOR STUMP FOR BARS H. 3.0 CONIX FOR AXIAL AND SM SM Ø 6,0
- SCREW SM HEALING COUNTERSUNK Ø 5 HT 4
- SCREW SM STUMP FOR FIXING FOR BEAUTY AND AXIAL CONIX SM SM Ø 6.0
- SCREW STRAIGHT ABUTMENT ANATOMICO Ø3.3-3.7 H1
- SCREW STRAIGHT ABUTMENT ANATOMICO Ø3.3-3.7 H2
- SCREW STRAIGHT ABUTMENT ANATOMICO Ø4,7 H1
- SCREW STRAIGHT ABUTMENT ANATOMICO Ø4.7 H2
- SCREW STRAIGHT ABUTMENT ø3.3 / 3.7 H3
- SCREW STRAIGHT ABUTMENT ø3.3 / 3.7 H4
- SCREW STRAIGHT ABUTMENT Ø4 .7 H3
- SCREW STRAIGHT ABUTMENT Ø4.7 H0
- SCREW STRAIGHT ABUTMENT Ø4.7 H1
- SCREW STRAIGHT ABUTMENT Ø4.7 H2
- SCREW STRAIGHT ABUTMENT Ø4.7 H4
- SCREW STRAIGHT H 3 MUA
- SCREW STUMP Ø4. 7
- SCREW SURGICAL
- SCREW SURGICAL
- SCREW SYSTEM FOR HEALING H 2 HEX EST LP
- SCREW SYSTEM FOR HEALING H 3 HEX EST LP
- SCREW SYSTEM FOR HEALING H 4 HEX EST LP
- SCREW SYSTEM FOR HEALING H 4 HEX EST SP
- SCREW SYSTEM FOR HEALING H 5.5 HEX EST LP
- SCREW SYSTEM FOR HEALING H 5.5 HEX EST SP
- SCREW TAP NOBELACTIVE 3.0
- SCREW TAP REPAIR BRÅNEMARK SYSTEM ® NP
- SCREW TAP REPL SLCT STRAIGHT RP 10-13 MM
- SCREW TAP REPL SLCT STRAIGHT RP 10-18 MM
- SCREW TAP STRAIGHT WP 7-10 MM
- SCREW TAP STRAIGHT WP 7-15 MM
- SCREW TORQUE GOLD - SHORT
- SCREW TRAMONTE
- SCREW WAXING
- SCREW WITH PROSTHETIC CAPPETTA SM Ø 3.6 - Ø 4.0
- SCREW-ORAL LOBO
- SCREWDRIVER FOR CONICAL ABUTMENT
- SCREWDRIVER FOR SHORT CONTRA-ANGLE FOR CONOMETRIC SP
- SCREWDRIVER HANDLE
- SCREWDRIVER HANDLE 4 MM - SURGICAL TOOLS
- SCREWDRIVER L 20
- SCREWDRIVER L 25
- SCREWDRIVER L 30
- SCREWDRIVER SHORT CONTRA-ANGLE FOR MP CONOMETRIC
- SCREWDRIVER TORX SHORT TO CONTRA
- SCREWDRIVER, 11CM
- SCREWDRIVERS FOR PLANTS FROM CONTRA RESISTA
- SCREWDRIVERS FOR PORTIONS OF CONTRA PROSTHETIC RESISTA
- SCREWER EXTRA SHORT CONTRA-ANGLE FOR CONOMETRIC MP
- SCREWER MANUAL TORX TO SCREW COVER SPE
- SCREWERS MANUAL
- SCREWS FOR PLANT
- SCREWS FOR TRANSFER
- SCREWS FOR TRANSFER
- SCREWS LINGUAL STUMP 3.30/3.75-10 ° X 1.6 M
- SCREWS THROUGH
- SE SIMILAR DIAMETER 3MM
- SE SIMILAR DIAMETER 5MM
- SE-ROTATING CASTABLE ABUTMENT DIAM.3MM
- SE-ROTATING CASTABLE ABUTMENT DIAM.5MM
- SECONDARY COMPONENT CEMENTING C, D 3.5 MM, GH 1 MM, AH 4MM, TI
- SELF-DRILLING SCREW GRAFT
- SET TEMPORARY MICROSYS
- SET TEMPORARY MICROTEMP
- SET TEMPORARY MICROTEMP
- SFI-ANCHOR ABUTMENTS PLANNER RC
- SFI-ANCHOR ABUTMENTS PLANNER RN
- SFI-ANCHOR ALIGNER
- SFI-ANCHOR BASIC SET
- SFI-ANCHOR BLOCK-OUT SPACER
- SFI-ANCHOR HOUSING
- SFI-ANCHOR PART IMPRESSION
- SFI-ANCHOR RETENTION INSERT STRONG
- SFI-ANCHOR RETENTION INSERT, ELITOR
- SFI-ANCHOR RETENTION INSERT, EXTRA-LOW
- SFI-ANCHOR RETENTION INSERT, LOW
- SFI-ANCHOR RETENTION INSERT, MEDIUM
- SHAFT EXTENSION DRILL
- SHORT ANGLE SCREWDRIVER FOR ES. EST LP
- SHORT HEX CONNECTOR SYSTEM EAST CONTRA SP
- SHORT HEX CONNECTOR SYSTEM EAST LP CONTRA
- SHORT HEX CONNECTOR SYSTEM EST MP- CONTRA
- SHORT-ANGLE SCREWDRIVER FOR EX. EAST MP
- SHORT-HAND WRENCH WRENCH FOR AND
- SHORTLOCK¿ STANDARD ABUTMENT - NOBEL BIOCARE¿ - NOBELREPLACE¿ WP - 5MM
- SHOULDER ABUTMENTS 1MM STRAIGHT - PROSTHETICS
- SHOULDER ABUTMENTS PLASTIC TRANSFER CAP - PROSTHETICS
- SHOULDER STRAIGHT ABUTMENTS 2MM - PROSTHETICS
- SIMILAR
- SIMILAR
- SIMILAR
- SIMILAR
- SIMILAR
- SIMILAR
- SIMILAR
- SIMILAR
- SIMILAR
- SIMILAR
- SIMILAR BIOSPHERE
- SIMILAR BRANE
- SIMILAR DIAMETER 2.7 MICRO SPHERE
- SIMILAR DIAMETER 2.7 SPHERE MICRO
- SIMILAR DIAMETER 2.7 SPHERE NORMO
- SIMILAR DIAMETER 2.7 STUMP
- SIMILAR DIAMETER 2.7 STUMP
- SIMILAR DIAMETER 3.0
- SIMILAR DIAMETER 3.0
- SIMILAR DIAMETER 3.3 - 3.8 - 4.1 - 5.2
- SIMILAR DIAMETER 3.3 - 3.8 - 4.1 - 5.2
- SIMILAR DIAMETER 3.8 - 4.0 - 4.7
- SIMILAR DIAMETER 3.8 - 4.0 - 4.7
- SIMILAR DIAMETER 5.0
- SIMILAR DIAMETER 5.0
- SIMILAR DIAMETER 5.2 - 6.2 - 7.2
- SIMILAR DIAMETER 5.2 - 6.2 - 7.2
- SIMILAR EOS
- SIMILAR FC IMPLANT
- SIMILAR LABORATORY - FUCSIA
- SIMILAR LABORATORY - YELLOW
- SIMILAR LABORATORY AND DIE CASTABLE
- SIMILAR LABORATORY AND DIE CASTABLE
- SIMILAR LABORATORY DS ESAG. INSIDE DIAM. 4 MM
- SIMILAR LABORATORY DS ESAG. INSIDE DIAM. 5 MM
- SIMILAR MUA
- SIMILAR PLANT FOR HEX INT CONICAL LP
- SIMILAR TO PLANT HEX TAPER INT SP
- SIMILAR TO PLANT INT HEX ARBOR MP
- SIMILAR TO PLANT LP HEX EST
- SIMILAR TO PLANT LP HEX INT
- SIMILAR TO PLANT MP HEX EST
- SIMILAR TO PLANT MP HEX INT
- SIMILAR TO PLANT SP HEX INT
- SIMILAR TORONTO Q
- SKIRT IMPR COPING NOBELPERFECT RP 5/PKG
- SLEEVE FOR PILLAR
- SLEEVE FOR TITANIUM CEM. BASE, BURN-OUT FIT PASSIVE
- SLEEVE FOR TITANIUM CEM. BASIS FOR CONELOG ®, BURN-OUT-FIT PASSIVE
- SLEEVE OF GUIDE
- SLIM FIT STRAIGHT H.2
- SLY SYSTEM ANTI-ROTATING
- SLY SYSTEM ANTI-ROTATION KIT WITH SCREW FOR INCLINED HOLE
- SLY SYSTEM ANTI-ROTATION KIT WITH SCREW FOR INCLINED HOLE
- SLY SYSTEM ANTI-ROTATION KIT WITH SCREW FOR STRAIGHT HOLE
- SLY SYSTEM FOR ANTI-ROTATING PLASMA SYSTEM ) STRAIGHT
- SLY SYSTEM ROTATING
- SLY SYSTEM ROTATING
- SLY SYSTEM ROTATING
- SLY SYSTEM ROTATING
- SLY SYSTEM ROTATING
- SLY SYSTEM ROTATING
- SLY SYSTEM ROTATING
- SLY SYSTEM ROTATING
- SLY SYSTEM ROTATING
- SLY SYSTEM ROTATING
- SLY SYSTEM ROTATING
- SLY SYSTEM ROTATING
- SLY SYSTEM ROTATING
- SLY SYSTEM ROTATING
- SLY SYSTEM ROTATING
- SLY SYSTEM ROTATING
- SLY SYSTEM ROTATING
- SLY SYSTEM ROTATING
- SLY SYSTEM ROTATING
- SLY SYSTEM ROTATING
- SLY SYSTEM ROTATING
- SLY SYSTEM ROTATING KIT WITH SCREW FOR INCLINED HOLE
- SLY SYSTEM ROTATING KIT WITH SCREW FOR STRAIGHT HOLE
- SLY SYSTEM-ROTATING
- SLY SYSTEM-ROTATING
- SLY SYSTEM-ROTATING
- SLY SYSTEM-ROTATING
- SLY SYSTEM-ROTATING
- SLY SYSTEM-ROTATING
- SLY SYSTEM-ROTATING
- SLY SYSTEM-ROTATING
- SLY SYSTEM-ROTATING
- SLY SYSTEM-ROTATING
- SLY SYSTEM-ROTATING
- SLY SYSTEM-ROTATING
- SLY SYSTEM-ROTATING
- SLY SYSTEM-ROTATING
- SLY SYSTEM-ROTATING
- SLY SYSTEM-ROTATING
- SLY SYSTEM-ROTATING
- SLY SYSTEM-ROTATING
- SLY SYSTEM-ROTATING
- SLY SYSTEM-ROTATING
- SLY SYSTEM-ROTATING
- SLY SYSTEM-ROTATING
- SLY SYSTEM-ROTATING
- SLY SYSTEM-ROTATING
- SLY SYSTEM-ROTATING
- SLY SYSTEM-ROTATING
- SLY SYSTEM-ROTATING
- SLY SYSTEM-ROTATING
- SLY SYSTEM-ROTATING
- SLY SYSTEM-ROTATING
- SLY SYSTEM-ROTATING
- SLY SYSTEM-ROTATING
- SLY SYSTEM-ROTATING
- SLY SYSTEM-ROTATING
- SLY SYSTEM-ROTATING
- SLY SYSTEM-ROTATING
- SLY SYSTEM-ROTATING
- SLY SYSTEM-ROTATING
- SLY SYSTEM-ROTATING
- SLY SYSTEM-ROTATING
- SLY SYSTEM-ROTATING
- SLY SYSTEM-ROTATING
- SLY SYSTEM-ROTATING
- SLY SYSTEM-ROTATING
- SLY SYSTEM-ROTATING
- SLY SYSTEM-ROTATING
- SLY SYSTEM-ROTATING
- SLY SYSTEM-ROTATING
- SLY SYSTEM-ROTATING
- SLY SYSTEM-ROTATING
- SLY SYSTEM-ROTATING
- SLY SYSTEM-ROTATING
- SM Ø 3.6 STUMP FOR BEAUTY AND AXIAL CONIX SM SM Ø 3.6
- SNAPPY ABUTMENT RP ABUTMENTS REPLICA
- SP SYSTEM SIMILAR TO HEX EST
- SP SYSTEM SIMILAR TO HEX INT
- SPACER
- SPIDER PILLAR SCREW SCREW
- SPLINT NASAL EXTERNAL
- STATION
- STILL BALL RETENTION
- STONE 1.5 FOR CONOMETRIC SP
- STONE DR. 5 SP CONOMETRIC
- STOP 4.0 H 6 MM FOR DD
- STOP CUTTER 4.8 H 10 MM FOR DD
- STOP CUTTER 4.8 H 11.5 MM FOR DD
- STOP CUTTER 4.8 H 6 MM FOR DD
- STOP CUTTER 4.8 H 6 MM FOR DD
- STOP CUTTER 4.8 H 8.5 MM FOR DD
- STOP DIAM 4.8 H 11.5 MM FOR MILLING
- STOP DIAM 4.8 H 11.5 MM FOR MILLING
- STOP DRILL 4.0 H 11.5 MM FOR DD
- STOP DRILL 4.0 H 13 MM FOR DD
- STOP DRILL 4.0 H 8.5 MM FOR DD
- STOP DRILL 4.0 H10 MM FOR DD
- STOP FOR MILLS
- STOP TITANIUM 6.0MM HEIGHT
- STOP TITANIUM 8.5MM HEIGHT
- STOP TITANIUM HEIGHT 10MM
- STOP TITANIUM HEIGHT 10MM
- STOP TITANIUM HEIGHT 11MM
- STOP TITANIUM HEIGHT 12MM
- STOP TITANIUM HEIGHT 12MM
- STOP TITANIUM HEIGHT 13MM
- STOP TITANIUM HEIGHT 6.0MM
- STOP TITANIUM HEIGHT 8.5MM
- STOP ¿4.0 H 10 MM FOR DRILL
- STOP ¿4.0 H 11.5 MM TO DRILL
- STOP ¿4.0 H 13 MM FOR MILLING
- STOP ¿4.0 H 8.5 MM TO DRILL
- STOP ¿4.8 H 10 MM FOR MILLING
- STOP ¿4.8 H 6 MM FOR MILLING
- STOP ¿4.8 H 8.5 MM FOR MILLING
- STOP Ø 4.0 H 6 MM TO DRILL
- STRAIGHT ABUTMENT LP HEX EST
- STRAIGHT ABUTMENT LP HEX INT
- STRAIGHT ABUTMENT MP HEX EST
- STRAIGHT ABUTMENT MP HEX INT
- STRAIGHT ABUTMENT SP HEX EST
- STRAIGHT ABUTMENT WITH SHOULDER LP HEX INT
- STRAIGHT ABUTMENT WITH SHOULDER MP HEX INT
- STRAIGHT ABUTMENT WITH SHOULDER SP HEX INT
- STRAIGHT ABUTMENTS - PROSTHETICS
- STRAIGHT CONNECTOR
- STRAIGHT FOR ONE IMPLANT
- STRAIGHT KEY
- STRAIGHT NOBRPL GUIDED SURGERY KIT
- STRAIGHT NP COUNTERBORE REPLACE ® SELECT
- STRAIGHT PA ABUTMENT H 2 FOR CONOMETRIC MP
- STRAIGHT PA ABUTMENT H 3 FOR CONOMETRIC MP
- STRAIGHT PA STRAIGHT H 1 FOR CONOMETRIC MP
- STRAIGHT PA STRAIGHT H 1 FOR HEX EST MP
- STRAIGHT PA STRAIGHT H 1 FOR HEX EST MP
- STRAIGHT PA STRAIGHT H 1 FOR HEX INT MP
- STRAIGHT PA STRAIGHT H 1 FOR HEX INT SP
- STRAIGHT PA STRAIGHT H 2 FOR HEX EST MP
- STRAIGHT PA STRAIGHT H 2 FOR HEX INT MP
- STRAIGHT PA STRAIGHT H 2 FOR HEX INT SP
- STRAIGHT PA STRAIGHT H 3 FOR HEX INT MP
- STRAIGHT SCREW TAP REPL SLCT NP 10-15 MM
- STRAIGHT SHOULDERED ABUTMENT H1 PLANT HEX TAPER INT SP
- STRAIGHT SHOULDERED ABUTMENT PLANT HEX INT ARBOR LP
- STRAIGHT SHOULDERED ABUTMENT PLANT HEX TAPER INT SP
- STRAIGHT SHOULDERED ABUTMENT PLANT INT HEX ARBOR MP
- STRAIGHT ST ABUTMENT HEX INT
- STRAIGHT STONE CONCEPT WITH SHOULDER H 3 MP CONOMETRIC
- STRAIGHT STRAIGHT H 3 SP CONOMETRIC
- STRAIGHT STRAIGHT H1 3 MP CONOMETRIC
- STRAIGHT STRAIGHT H1.5 MP CONOMETRIC
- STRAIGHT STRAIGHT STONE WITH CONCRETE STRAIGHT STONE CONCEALER HALF STONE WITH CONCRETE
- STRAIGHT STRAIGHT WITH SHOULDER H1.5 SP CONOMETRIC
- STRAIGHT STRAW WITH SHOULDER H1.5 MP CONOMETRIC
- STRAIGHT ZIRCONIUM ABUTMENTS - PROSTHETICS
- STRAU - STUMP FOR TEMPORARY BRIDGE
- STRAUMANN CAPPETTA CLASSIC GOLD 9TH
- STRAUMANN CAPPETTA CLASSIC GOLD TPS
- STRAUMANN CLASSIC COMPONENT SECONDARY ANGLE 15 °
- STRAUMANN CLASSIC COMPONENT SECONDARY ANGLE 20 °
- STRAUMANN CLASSIC COMPONENT SECONDARY OCTA, H 1,5 MM
- STRAUMANN CLASSIC IN GOLD FOR COPING TS OCTA
- STRAUMANN COPING IN CLASSIC GOLD 5.0MM H, HSL
- STRAUMANN NC IPS E.MAX COMP. SEC. ANATOMICAL 15 ° ANGLED 3.5MM GH, MO 0, ZRO2
- STRAUMANN NC IPS E.MAX COMP. SEC. ANATOMICAL 15 ° ANGLED 3.5MM GH, MO 1 ZRO2
- STRAUMANN NC IPS E.MAX COMP. SEC. ANATOMICAL 3.5MM STRAIGHT GH, MO 0, ZRO2
- STRAUMANN NC IPS E.MAX COMP. SEC. ANATOMICAL 3.5MM STRAIGHT GH, MO 1 ZRO2
- STRAUMANN NC IPS E.MAX COMP. SEC. ANATOMICAL STRAIGHT GH 2MM, MO 0, ZRO2
- STRAUMANN NC IPS E.MAX COMP. SEC. ANATOMICAL STRAIGHT GH 2MM, MO 1 ZRO2
- STRAUMANN NC IPS E.MAX COMP. SEC. ERGONOMIC ANGLED 15 ° GH 2MM, MO 0, ZRO2
- STRAUMANN NC IPS E.MAX COMP. SEC. ERGONOMIC ANGLED 15 ° GH 2MM, MO 1 ZRO2
- STRAUMANN SECONDARY COMPONENT OF CLASSIC PIN
- STRAUMANN SFI-ANCHOR ABUTMENTS, DIVERGENCE 10TH, CADCAM
- STRAUMANN ® RC ANATOMIC IPS E.MAX ® 15 ° ANGLED, GH 2MM, MO 0, ZRO2
- STRAUMANN ® RC ANATOMIC IPS E.MAX ® 15 ° ANGLED, GH 2MM, MO 1 ZRO2
- STRAUMANN ® RC ANATOMIC IPS E.MAX ® 15 ° ANGLED, GH 3.5MM, MO 1 ZRO2
- STRAUMANN ® RC ANATOMIC IPS E.MAX ® ANGULATED 15 °, GH 3.5MM, MO 0, ZRO2
- STRAUMANN ® RC ANATOMIC IPS E.MAX ® LAW, GH 2MM, MO 1 ZRO2
- STRAUMANN ® RC ANATOMIC IPS E.MAX ® LAW, GH 3.5MM, MO 0, ZRO2
- STRAUMANN ® RC ANATOMIC IPS E.MAX ® LAW, GH 3.5MM, MO 1 , ZRO2
- STRAUMANN ® RC ANATOMIC IPS E.MAX ®, RIGHT, GH 2MM, MO 0, ZRO2
- STUD ALIGNMENT
- STUMP "UCLA"
- STUMP "UCLA"
- STUMP "UCLA"
- STUMP 0 ° SMALL BOLT THROUGH
- STUMP 15 ° ANGLED SYSTEM FOR HEX EST MP
- STUMP 15 ° ANGLED SYSTEM FOR HEX EST SP
- STUMP 15 ° ANGLED SYSTEM FOR HEX INT LP
- STUMP 15 ° ANGLED SYSTEM FOR HEX INT MP
- STUMP 15 ° ANGLED SYSTEM FOR HEX INT SP
- STUMP 17 4.1X5.0 MM
- STUMP 25 ° ANGLED SYSTEM FOR HEX EST MP
- STUMP 25 ° ANGLED SYSTEM FOR HEX EST SP
- STUMP 25 ° ANGLED SYSTEM FOR HEX INT MP
- STUMP 25 ° ANGLED SYSTEM FOR HEX INT SP
- STUMP 3.30-/3.75-0 ° LINGUAL SCREW M1.4 X
- STUMP 3.30-/3.75-10 LINGUAL SCREW M1.4 X °
- STUMP 3.30./3.75-0 X ° LINGUAL SCREWS M 1.6
- STUMP 3.3X2 17 MM
- STUMP 3.3X4 17 MM
- STUMP 30 (PART 1) 4.1X3 MM
- STUMP 30 (PART 1) 4.1X4 MM
- STUMP 4.1X2 17 MM
- STUMP 4.1X3 17 MM
- STUMP 4.25-10 ° LINGUAL SCREW M1.6 X
- STUMP 4.3X2 17 MM
- STUMP 4.3X3 17 MM
- STUMP 4.3X4 17 MM
- STUMP 5.00-0 ° LINGUAL SCREW M1.6 X
- STUMP 5.00-0 ° X SCREW M1.4 LINGUAL
- STUMP 5.00-10 ° LINGUAL SCREW M1.4 X
- STUMP 5.0X2 17 MM
- STUMP 5.0X3 17 MM
- STUMP 5.0X4 17 MM
- STUMP 6.00-20 ° X LINGUAL M1.6 SCREW
- STUMP 6.00-20 ° X LINGUAL M1.6 SCREW
- STUMP A BALL FOR PLANT H2 INT HEX ARBOR MP
- STUMP A BALL FOR PLANTING H 2 MP HEX EST
- STUMP A BALL FOR PLANTING H 3 MP HEX EST
- STUMP A BALL FOR PLANTING H 4 HEX INT MP
- STUMP A BALL FOR PLANTING H 4 HEX INT SP
- STUMP A BALL FOR PLANTING H 4 MP HEX EST
- STUMP A BALL FOR PLANTING H 5 MP HEX EST
- STUMP A BALL FOR PLANTING HEX H 1 INT LP
- STUMP A BALL FOR PLANTING HEX H 1 INT MP
- STUMP A BALL FOR PLANTING HEX H 1 INT SP
- STUMP A BALL FOR PLANTING HEX H 2 INT LP
- STUMP A BALL FOR PLANTING HEX H 2 INT MP
- STUMP A BALL FOR PLANTING HEX H 2 INT SP
- STUMP A BALL FOR PLANTING HEX H 3 INT LP
- STUMP A BALL FOR PLANTING HEX H 3 INT MP
- STUMP A BALL FOR PLANTING HEX H 3 INT SP
- STUMP ACW 0 ° H1
- STUMP ACW 0 ° H3
- STUMP ANATOMICAL SIDE CM1.5 MM
- STUMP ANATOMICAL SIDE CM2.5 MM
- STUMP ANATOMICAL SIDE CM3.5 MM
- STUMP ANATOMICAL SIDE EXACT CM1.5 MM
- STUMP ANATOMICAL SIDE EXACT CM2.5 MM
- STUMP ANATOMICO CM1.5 MM
- STUMP ANATOMICO CM2.5 MM
- STUMP ANATOMICO CM3.5 MM
- STUMP ANATOMICO EXACT CM1.5 MM
- STUMP ANATOMICO EXACT CM2.5 MM
- STUMP ANATOMICO EXACT CM3.5 MM
- STUMP ANATOMICO FACILITY1.5 MM
- STUMP ANATOMICO FACILITY2.5 MM
- STUMP ANATOMICO FACILITY3.5 MM
- STUMP ANGULATED
- STUMP ANGULATED -15 ° PLANT HEX INT SP TAPER
- STUMP ANGULATED -15 ° PLANT INT HEX LP TAPER
- STUMP ANGULATED -15¿ H1 PLANT HEX INT SP TAPER
- STUMP ANGULATED -15¿ H1 PLANT INT HEX CONE MP
- STUMP ANGULATED -25 ° PLANT HEX INT SP CONE
- STUMP ANGULATED -25¿ H1 PLANT INT HEX ARBOR MP
- STUMP ANGULATED 17¿ - H 3 - MUA PLANT HEX INT SP
- STUMP ANGULATED 30¿ - H - MUA PLANT HEX SP EST
- STUMP ANGULATED 42¿ - H 2 - MUA PLANT HEX EST MP
- STUMP ANGULATED 42¿ - H 2 - MUA PLANT HEX EST SP
- STUMP ANGULATED 42¿ - H 2 - MUA TO PLANT MP INT HEX
- STUMP ANGULATED 42¿ - H 3 - MUA PLANT HEX EST MP
- STUMP ANGULATED 42¿ - H 3 - MUA PLANT HEX EST SP
- STUMP ANGULATED 42¿ - H 3 - MUA PLANT HEX INT MP
- STUMP ANTIROTATION
- STUMP ANTIROTATION
- STUMP ANTIROTATION
- STUMP ANTIROTATION
- STUMP ANTIROTATION
- STUMP BALL
- STUMP BALL
- STUMP BALL
- STUMP BALL
- STUMP BALL
- STUMP BALL
- STUMP BALL
- STUMP BALL BLADE UP
- STUMP BALL H1 PLANT TAPER INT HEX LP
- STUMP BALL PLANT CASL Ø 3, 5 MM
- STUMP BALL PLANT CASL Ø 3, 5 MM
- STUMP BALL PLANT CASL Ø 3, 5 MM
- STUMP BALL PLANT CASL Ø 3, 5 MM
- STUMP BALL PLANT CASL Ø 3, 5 MM
- STUMP BALL PLANT CASL Ø4, 0 MM
- STUMP BASE GOLD ROTARY HEX EST SP
- STUMP BASE GOLD ROTARY HEX INT LP
- STUMP BASE GOLD ROTARY HEX INT MP
- STUMP BASE GOLD ROTARY HEX INT SP
- STUMP BASE GOLD-ROTATING HEX INT LP
- STUMP BASE GOLD-ROTATING HEX INT MP
- STUMP BASE GOLD-ROTATING HEX INT SP
- STUMP BEAUTY FOR CONIX SM SM Ø 5,0 Ø 5,0 AND AXIAL SM
- STUMP CASTABLE
- STUMP CASTABLE
- STUMP CASTABLE
- STUMP CASTABLE
- STUMP CASTABLE
- STUMP CASTABLE
- STUMP CASTABLE
- STUMP CASTABLE
- STUMP CASTABLE
- STUMP CASTABLE
- STUMP CASTABLE
- STUMP CASTABLE
- STUMP CASTABLE
- STUMP CASTABLE ANTIROTANT FOR ONE SYSTEM
- STUMP CASTABLE FAST SM
- STUMP CASTABLE SM Ø 4
- STUMP CASTABLE SM Ø 5
- STUMP CASTABLE Ø 6.0 CONIX FOR CEMENTING SM SM SM Ø 6.0 AXIAL AND
- STUMP CM 0.8 MM
- STUMP CM 2.5 MM
- STUMP CM 3.5 MM
- STUMP CM 4.5 MM
- STUMP CM 5.5 MM
- STUMP CONE REVERSE
- STUMP FOR AIR SCREW PACO
- STUMP FOR AIR SCREW PACO
- STUMP FOR AIR SCREW PACO
- STUMP FOR AIR SCREW PACO
- STUMP FOR BALL H3 IMPIA NTO INT HEX LP TAPER
- STUMP FOR BARS SM H.COLLO Ø 3.6 3.0 AXIAL AND FOR CONIX SM SM Ø 3,6
- STUMP FOR BARS SM H.COLLO Ø 4.5 1.5 AXIAL AND FOR CONIX SM SM Ø 4.5
- STUMP FOR BARS SM H.COLLO Ø 4.5 3.0 AXIAL AND FOR CONIX SM SM Ø 4.5
- STUMP FOR BARS SM H.COLLO Ø 6.0 1.5 AXIAL AND FOR CONIX SM SM Ø 6.0
- STUMP FOR BEAUTY SM CONIX Ø 4.5 Ø 4.5 SM SM AND AXIAL
- STUMP FOR BEAUTY Ø 6.0 SM SM CONIX AXIAL AND SM Ø 6.0
- STUMP FOR BLADE SCREW UP
- STUMP FOR BLADE SCREW UP
- STUMP FOR IMMEDIATE LOADING SYSTEM SUBMERGED LEONARDO
- STUMP FOR IMMEDIATE LOADING SYSTEM SUBMERGED LEONARDO
- STUMP FOR IMMEDIATE LOADING SYSTEM SUBMERGED LEONARDO
- STUMP FOR IMMEDIATE LOADING SYSTEM SUBMERGED LEONARDO
- STUMP FOR IMMEDIATE LOADING SYSTEM TRANSMUCOSAL LEONARDO
- STUMP FOR IMMEDIATE LOADING SYSTEM TRANSMUCOSAL LEONARDO
- STUMP FOR OUTSIDE PLANT HEXAGON
- STUMP FOR PLANT ALLEN
- STUMP FOR PLANT PROVISIONAL RETENTIVE MUA MP
- STUMP FOR PLANT PROVISIONAL SMOOTH MUA MP
- STUMP FOR PROVISIONAL ROTARY FC IMPLANT
- STUMP FOR ROUND BARS SM Ø 3.6 HT 1.5
- STUMP FOR ROUND BARS SM Ø 3.6 HT 3
- STUMP FOR ROUND BARS SM Ø 4 HT 3
- STUMP FOR ROUND BARS SM Ø 4,0 HT 1.5
- STUMP FOR ROUND BARS SM Ø 4.5 HT 1.5
- STUMP FOR ROUND BARS SM Ø 4.5 HT 3
- STUMP FOR ROUND BARS SM Ø 5-HT 1.5
- STUMP FOR ROUND BARS SM Ø 5-HT 3
- STUMP FOR STANDARD SYSTEM STRAIGHT HEX INT LP
- STUMP FOR STANDARD SYSTEM STRAIGHT HEX INT MP
- STUMP FOR STANDARD SYSTEM STRAIGHT HEX INT SP
- STUMP FOR SYSTEM STRAIGHT H 1 MUA HEX EST MP
- STUMP FOR SYSTEM STRAIGHT H 1 MUA HEX INT MP
- STUMP FOR SYSTEM STRAIGHT H 2 MUA HEX EST MP
- STUMP FOR SYSTEM STRAIGHT H 2 MUA HEX INT MP
- STUMP FOR SYSTEM STRAIGHT H 3 MUA HEX EST MP
- STUMP FOR SYSTEM STRAIGHT H 3 MUA HEX INT MP
- STUMP FOR SYSTEM STRAIGHT HEX EST LP
- STUMP FOR SYSTEM STRAIGHT HEX EST MP
- STUMP FOR SYSTEM STRAIGHT HEX EST SP
- STUMP FOR SYSTEM STRAIGHT HEX INT LP
- STUMP FOR SYSTEM STRAIGHT HEX INT MP
- STUMP FOR SYSTEM STRAIGHT HEX INT SP
- STUMP FOR TEMPORARY (NO HEX) HEX SYSTEM FOR EAST LP
- STUMP FOR TEMPORARY (NO HEX) SYSTEM FOR HEX EST MP
- STUMP FOR TEMPORARY (NO HEX) SYSTEM FOR HEX EST SP
- STUMP FOR TEMPORARY (NO HEX) SYSTEM FOR HEX INT LP
- STUMP FOR TEMPORARY (NO HEX) SYSTEM FOR HEX INT MP
- STUMP FOR TEMPORARY (NO HEX) SYSTEM FOR HEX INT SP
- STUMP FOR TEMPORARY (WITH HEX) HEX SYSTEM FOR EAST LP
- STUMP FOR TEMPORARY (WITH HEX) SYSTEM FOR HEX EST MP
- STUMP FOR TEMPORARY (WITH HEX) SYSTEM FOR HEX EST SP
- STUMP FOR TEMPORARY (WITH HEX) SYSTEM FOR HEX INT LP
- STUMP FOR TEMPORARY (WITH HEX) SYSTEM FOR HEX INT MP
- STUMP FOR TEMPORARY (WITH HEX) SYSTEM FOR HEX INT SP
- STUMP FOR TEMPORARY PEEK HEX INT MP
- STUMP FOR THE RIGHT BLADE MANGINI
- STUMP FULL 0 ° ALLEN SMALL MEDIUM
- STUMP FULL 0 ° SMALL BEAUTY
- STUMP FULL 0 ° SMALL LONG
- STUMP FULL SMALL 0 °
- STUMP FULL SMALL 0 ° ALLEN
- STUMP FULL SMALL 0 ° CO N HEXAGON LONG
- STUMP GOLD (NO HEX) SYSTEM FOR HEX EST MP
- STUMP GOLD (WITH HEX) HEX SYSTEM FOR EAST LP
- STUMP GOLD (WITH HEX) SYSTEM FOR HEX EST MP
- STUMP GOLD (WITH HEX) SYSTEM FOR HEX EST SP
- STUMP GOLD (WITH HEX) SYSTEM FOR HEX INT LP
- STUMP GOLD (WITH HEX) SYSTEM FOR HEX INT MP
- STUMP GOLD (WITH HEX) SYSTEM FOR HEX INT SP
- STUMP GOLD BASE ROTATING HEX EST MP
- STUMP HEALING
- STUMP HEALING
- STUMP HEALING
- STUMP HEALING
- STUMP HEALING
- STUMP HEALING
- STUMP HEALING
- STUMP HEALING
- STUMP HEALING
- STUMP HEALING
- STUMP HEALING
- STUMP HEALING
- STUMP HEALING
- STUMP HEALING
- STUMP HEALING
- STUMP HEALING
- STUMP HEALING
- STUMP HEALING
- STUMP HEALING CF
- STUMP HEALING CF
- STUMP HEALING CF
- STUMP HEALING CF
- STUMP HEALING CF
- STUMP HEALING CF
- STUMP HEALING CF
- STUMP HEALING CF
- STUMP HEALING CF
- STUMP HEALING CF
- STUMP HEALING CF
- STUMP HEALING CF
- STUMP HEALING CF
- STUMP HEALING CF
- STUMP HEALING CF
- STUMP HEALING CF
- STUMP HEALING CF
- STUMP HEALING CF
- STUMP HEALING CF
- STUMP HEALING CF
- STUMP HEALING CM 3.3X0.8 MM
- STUMP HEALING CM 3.3X2.5 MM
- STUMP HEALING CM 3.3X3.5 MM
- STUMP HEALING CM 3.3X4.5 MM
- STUMP HEALING CM 3.3X5.5 MM
- STUMP HEALING CM 4.5X0.8 MM
- STUMP HEALING CM 4.5X1.5 MM
- STUMP HEALING CM 4.5X2.5 MM
- STUMP HEALING CM 4.5X3.5 MM
- STUMP HEALING CM 4.5X4.5 MM
- STUMP HEALING CM 4.5X5.5 MM
- STUMP HEALING CM3.3X1.5 MM
- STUMP HEALING CM3.3X6.5 MM
- STUMP HEALING CM4.5X6.5 MM
- STUMP HEALING DIVERGENT 3.3X2 MM
- STUMP HEALING DIVERGENT 3.3X3.0 MM
- STUMP HEALING DIVERGENT 3.3X4.0MM
- STUMP HEALING DIVERGENT 4.1X2.0 MM
- STUMP HEALING DIVERGENT 4.1X3.0 MM
- STUMP HEALING DIVERGENT 4.3X2 MM
- STUMP HEALING DIVERGENT 4.3X2.0 MM
- STUMP HEALING DIVERGENT 4.3X3.0 MM
- STUMP HEALING DIVERGENT 4.3X4 MM
- STUMP HEALING DIVERGENT 4.3X4.0 MM
- STUMP HEALING DIVERGENT 5.0X2.0 MM
- STUMP HEALING DIVERGENT 5.0X3 MM
- STUMP HEALING DIVERGENT 5.0X3.0 MM
- STUMP HEALING DIVERGENT 5.0X4.0 MM
- STUMP HEALING DIVERGENTE3.3X2.0 MM
- STUMP HEALING DIVERGENTE4.1X4.0 MM
- STUMP HEALING FACILITY 1.5 MM
- STUMP HEALING FACILITY 2.5 MM
- STUMP HEALING FACILITY 3.5 MM
- STUMP HEALING FACILITY 4.5 MM
- STUMP HEALING FOR BLADE GNALDUCCI
- STUMP HEALING FOR BLADE MANGINI
- STUMP HEALING PARALLEL 3.3X2.0 MM
- STUMP HEALING PARALLEL 3.3X3.0 MM
- STUMP HEALING PARALLEL 3.3X4.0 MM
- STUMP HEALING PARALLEL 4.3X2.0 MM
- STUMP HEALING PARALLEL 4.3X3.0 MM
- STUMP HEALING PARALLEL 4.3X4.0 MM
- STUMP HEALING SF 4.1X3.0 MM
- STUMP HEALING SF 4.1X4.0 MM
- STUMP HEALING SF 5.0X2.0 MM
- STUMP HEALING SF 5.0X3.0 MM
- STUMP HEALING SF 5.0X4 MM
- STUMP HEALING SF 5.0X4.0 MM
- STUMP HEALING SF4.1X2.0 MM
- STUMP HEALING SF4.1X5 MM
- STUMP HEALING SF4.1X6 MM
- STUMP HEALING SF5.0X5 MM
- STUMP HEALING SYSTEM TRANSUMOCO
- STUMP HEALING SYSTEM TRANSUMOCO
- STUMP HEALING SYSTEM TRANSUMOCO
- STUMP HEALING SYSTEM TRANSUMOCO
- STUMP HEALING WS 0.8 MM
- STUMP HEALING WS 0.8 MM
- STUMP HEALING WS 1.5 MM
- STUMP HEALING WS 2.5 MM
- STUMP HEALING WS 3.5 MM
- STUMP IN PEEK PLANT HEX INT ARBOR LP
- STUMP IN PEEK PLANT HEX INT ARBOR MP
- STUMP INDIVIDUALIZZABILE5.0 / 6.0 MM
- STUMP INVERTED CONE
- STUMP LARGE 0 ° SCREW THROUGH
- STUMP LARGE ALLEN AND LIVES THROUGH 15TH
- STUMP LARGE FULL
- STUMP LAW SM H.COLLO Ø 6.0 3.0 6.0 H.CORONA FOR AXIAL AND CONIX SM SM Ø 6.0
- STUMP LAW SM Ø H.COLLO 3.6 1.5 6.0 H.CORONA FOR AXIAL AND CONIX SM SM Ø 3.6
- STUMP LINGUAL SCREW M1.4 X 6.00-20 °
- STUMP LINGUAL SCREW M1.4 X ° 4.25-10
- STUMP MM 17.1X4
- STUMP MM CM1.5
- STUMP MM CONICAL 4.3X1
- STUMP MM CONICAL 4.3X2
- STUMP MM CONICAL 4.3X3
- STUMP MM CONICAL 5.0X2
- STUMP MM CONICAL 5.0X3
- STUMP MM CONICAL MICRO CM0.8
- STUMP MM CONICAL MICRO CM1.5
- STUMP MM CONICAL MICRO CM2.5
- STUMP MM CONICAL MICRO CM3.5
- STUMP MM CONICAL MICRO CM4.5
- STUMP MM CONICAL MICRO FACILITY1.5
- STUMP MM CONICAL MICRO FACILITY2.5
- STUMP MM CONICAL MICRO FACILITY3.5
- STUMP MM CONICAL MICRO FACILITY4.5
- STUMP MM CONICAL MINI4.3X1
- STUMP MM CONICAL SF 4.1X2
- STUMP MM CONICAL SF 4.1X3
- STUMP MM CONICAL SF4.1X1
- STUMP MM CONICO5.0X1
- STUMP MM INDIVIDUALIZZABILE4.1-6.0
- STUMP MM INDIVIDUALIZZABILE4.1X5.0
- STUMP MM TRANSEPITELIALE4.1X3
- STUMP MM TRANSEPITELIALE4.1X4
- STUMP MM TRANSEPITELIALE4.1X5
- STUMP MM UNIVERSAL SF4.5X4X1
- STUMP MM UNIVERSAL SF4.5X4X2
- STUMP MM UNIVERSAL SF4.5X4X3
- STUMP MM UNIVERSAL SF4.5X6X1
- STUMP MM UNIVERSAL SF4.5X6X2
- STUMP MM UNIVERSAL SF4.5X6X3
- STUMP MM UNIVERSAL WS4.5X4X0.8
- STUMP MM UNIVERSAL WS4.5X4X2.5
- STUMP MM WS0.8
- STUMP NOVALOC
- STUMP NOVALOC
- STUMP NOVALOC
- STUMP NOVALOC
- STUMP PRE-ANGLED
- STUMP PRE-ANGLED
- STUMP PRE-ANGLED
- STUMP PRE-ANGLED
- STUMP PRE-ANGLED
- STUMP PRE-ANGLED
- STUMP PRE-ANGLED
- STUMP PRE-ANGLED
- STUMP PRE-ANGLED
- STUMP PRE-ANGLED
- STUMP PREINCLINATO SM 17 ° - Ø 6 , 0 H.COLLO H.CORONALE 1.5 6.0 AXIAL AND FOR CONIX SM SM Ø 6.0
- STUMP PREINCLINATO SM 17 ° Ø 3.6 HT 1.5
- STUMP PREINCLINATO SM 17 ° Ø 3.6 HT 3.0
- STUMP PREINCLINATO SM 25 ° - Ø 6.0 H.COLLO H.CORONALE 1.5 6.0 AXIAL AND FOR CONIX SM SM Ø 6.0
- STUMP PREINCLINATO SM 25 ° Ø 4,0 1,5 HT
- STUMP PREINCLINATO SM 25 ° Ø 4.5 HT 1.5
- STUMP PROVISIONAL FAST SM
- STUMP PROVISIONAL SM Ø 3.6
- STUMP PROVISIONAL SM Ø 4.5
- STUMP PROVISIONAL SM Ø 6 , 0 TO AXIAL AND CONIX SM SM Ø 6.0
- STUMP SCREW
- STUMP SCREW
- STUMP SMALL BOLT THROUGH INCLINED 15 °
- STUMP SMALL FULL BEAUTY INCLINED 15 °
- STUMP SMALL FULL BEAUTY INCLINED 25 °
- STUMP SOVRAFONDIBILE SM Ø 3.6
- STUMP SOVRAFONDIBILE SM Ø 4
- STUMP SOVRAFONDIBILE SM Ø 5
- STUMP TAPER MINI 173.3X2 MM
- STUMP TAPER MINI 173.3X3 MM
- STUMP TAPER MINI 173.3X4 MM
- STUMP TAPER MINI 174.1X2 MM
- STUMP TAPER MINI 174.1X3 MM
- STUMP TAPER MINI 174.1X3 MM
- STUMP TAPER MINI 174.3X2 MM
- STUMP TAPER MINI 174.3X3 MM
- STUMP TAPER MINI 174.3X4 MM
- STUMP TAPER MINI 175.0X2 MM
- STUMP TAPER MINI 175.0X3 MM
- STUMP TAPER MINI 175.0X4 MM
- STUMP TAPER MINI 3.3X1 MM
- STUMP TAPER MINI 3.3X2 MM
- STUMP TAPER MINI 3.3X3 MM
- STUMP TAPER MINI 304.1X3 MM
- STUMP TAPER MINI 304.1X4 MM
- STUMP TAPER MINI 304.3X3 MM
- STUMP TAPER MINI 304.3X4 MM
- STUMP TAPER MINI 4.3X2 MM
- STUMP TAPER MINI 4.3X3 MM
- STUMP TAPER MINI 4.3X4 MM
- STUMP TAPER MINI 5.0X3 MM
- STUMP TAPER MINI 5.0X4 MM
- STUMP TAPER MINI CM 1.5 MM 17
- STUMP TAPER MINI CM 172.5 MM
- STUMP TAPER MINI CM 173.5 MM
- STUMP TAPER MINI CM 2.5 MM
- STUMP TAPER MINI CM 2.5 MM 30
- STUMP TAPER MINI CM 301.5 MM
- STUMP TAPER MINI CM 303.5 MM
- STUMP TAPER MINI CM0.8 MM
- STUMP TAPER MINI CM1.5 MM
- STUMP TAPER MINI CM3.5 MM
- STUMP TAPER MINI CM4.5 MM
- STUMP TAPER MINI CM5.5 MM
- STUMP TAPER MINI SF4.1X1 MM
- STUMP TAPER MINI SF4.1X2 MM
- STUMP TAPER MINI SF4.1X3 MM
- STUMP TAPER MINI SF4.1X4 MM
- STUMP TAPER MINI SF5.0X1.0 MM
- STUMP TAPER MINI SF5.0X2.0 MM
- STUMP TAPER MINI SF5.0X3.0 MM
- STUMP TAPER MINI WS0.8 MM
- STUMP TAPER MINI WS1.5 MM
- STUMP TAPER MINI WS2.5 MM
- STUMP TAPER MINI WS3.5 MM
- STUMP THE RIGHT PROWIDE HT 3 Ø 6 8 HC
- STUMP THE RIGHT PROWIDE Ø 6 1.5 HT 3 HC
- STUMP THE RIGHT PROWIDE Ø 6 1.5 HT HC 8
- STUMP THE RIGHT PROWIDE Ø6 HT 3 HC 3
- STUMP THE RIGHT PROWIDE Ø7 HT 1.5 HC 8
- STUMP THE RIGHT PROWIDE Ø7 HT 3 HC 1.5
- STUMP THE RIGHT PROWIDE Ø7 HT 3 HC 3
- STUMP THE RIGHT PROWIDE Ø7 HT 3 HC 8
- STUMP THE RIGHT SM Ø 3, 6 HT HC 1.5 6.5 6.6 ØC
- STUMP THE RIGHT SM Ø 3.3 HT 1.5 HC 8
- STUMP THE RIGHT SM Ø 3.3 HT 3 HC 8
- STUMP THE RIGHT SM Ø 3.6 HT 1.5 HC 8
- STUMP THE RIGHT SM Ø 3.6 HT 3 HC 8
- STUMP THE RIGHT SM Ø 4 HT 1.5 HC 6.5 ØC 7
- STUMP THE RIGHT SM Ø 4 HT 1.5 HC 8
- STUMP THE RIGHT SM Ø 4 HT 3 HC 8
- STUMP THE RIGHT SM Ø 4, 5 HT HC 1.5 6.5 7.5 ØC
- STUMP THE RIGHT SM Ø 4.5 HT 1.5 HC 8
- STUMP THE RIGHT SM Ø 4.5 HT 3 HC 8
- STUMP THE RIGHT SM Ø 5 HT 1.5 HC 8
- STUMP THE RIGHT SM Ø 5 HT 3 HC 8
- STUMP TO MILL
- STUMP TO MILL PROWIDE
- STUMP TO MILL SM Ø 3.6
- STUMP TO MILL SM Ø 4
- STUMP TO MILL SM Ø 4,5
- STUMP TRANSEPITHELIAL ZYGOMATIC CM3 MM
- STUMP TRANSEPITHELIAL ZYGOMATIC CM4 MM
- STUMP TRANSEPITHELIAL ZYGOMATIC CM5 MM
- STUMP UCLA CASTABLE (NO HEX) HEX SYSTEM FOR EAST LP
- STUMP UCLA CASTABLE (NO HEX) SYSTEM FOR HEX EST MP
- STUMP UCLA CASTABLE (NO HEX) SYSTEM FOR HEX EST SP
- STUMP UCLA CASTABLE (NO HEX) SYSTEM FOR HEX INT LP
- STUMP UCLA CASTABLE (NO HEX) SYSTEM FOR HEX INT MP
- STUMP UCLA CASTABLE (NO HEX) SYSTEM FOR HEX INT SP
- STUMP UCLA CASTABLE (WITH HEX) HEX SYSTEM FOR EAST LP
- STUMP UCLA CASTABLE (WITH HEX) SYSTEM FOR HEX EST MP
- STUMP UCLA CASTABLE (WITH HEX) SYSTEM FOR HEX EST SP
- STUMP UCLA CASTABLE (WITH HEX) SYSTEM FOR HEX INT LP
- STUMP UCLA CASTABLE (WITH HEX) SYSTEM FOR HEX INT MP
- STUMP UCLA CASTABLE (WITH HEX) SYSTEM FOR HEX INT SP
- STUMP UNIVERSAL CM (PART 1) 3.3X4X0.8 MM
- STUMP UNIVERSAL CM (PART 1) 3.3X4X1.5 MM
- STUMP UNIVERSAL CM (PART 1) 3.3X4X2.5 MM
- STUMP UNIVERSAL CM (PART 1) 3.3X4X3.5 MM
- STUMP UNIVERSAL CM (PART 1) 3.3X4X4.5 MM
- STUMP UNIVERSAL CM (PART 1) 3.3X4X5.5 MM
- STUMP UNIVERSAL CM (PART 1) 3.3X6X0.8 MM
- STUMP UNIVERSAL CM (PART 1) 3.3X6X1.5 MM
- STUMP UNIVERSAL CM (PART 1) 3.3X6X2.5 MM
- STUMP UNIVERSAL CM (PART 1) 3.3X6X3.5 MM
- STUMP UNIVERSAL CM (PART 1) 3.3X6X4.5 MM
- STUMP UNIVERSAL CM (PART 1) 3.3X6X5.5 MM
- STUMP UNIVERSAL CM (PART 1) 4.5X4X0.8 MM
- STUMP UNIVERSAL CM (PART 1) 4.5X4X1.5 MM
- STUMP UNIVERSAL CM (PART 1) 4.5X4X2.5 MM
- STUMP UNIVERSAL CM (PART 1) 4.5X4X3.5 MM
- STUMP UNIVERSAL CM (PART 1) 4.5X4X4.5 MM
- STUMP UNIVERSAL CM (PART 1) 4.5X4X5.5 MM
- STUMP UNIVERSAL CM (PART 1) 4.5X6X0.8 MM
- STUMP UNIVERSAL CM (PART 1) 4.5X6X1.5 MM
- STUMP UNIVERSAL CM (PART 1) 4.5X6X2.5 MM
- STUMP UNIVERSAL CM (PART 1) 4.5X6X3.5 MM
- STUMP UNIVERSAL CM (PART 1) 4.5X6X4.5 MM
- STUMP UNIVERSAL CM (PART 1) 4.5X6X5.5 MM
- STUMP UNIVERSAL CM 17 3.3X4X1.5 MM
- STUMP UNIVERSAL CM 17 3.3X4X2.5 MM
- STUMP UNIVERSAL CM 17 3.3X6X3.5 MM
- STUMP UNIVERSAL CM 17 4.5X6X2.5 MM
- STUMP UNIVERSAL CM 173.3X4X3.5 MM
- STUMP UNIVERSAL CM 173.3X6X1.5 MM
- STUMP UNIVERSAL CM 173.3X6X2.5 MM
- STUMP UNIVERSAL CM 174.5X4X1.5 MM
- STUMP UNIVERSAL CM 174.5X4X2.5 MM
- STUMP UNIVERSAL CM 174.5X4X3.5 MM
- STUMP UNIVERSAL CM 174.5X6X1.5 MM
- STUMP UNIVERSAL CM 174.5X6X3.5 MM
- STUMP UNIVERSAL CM 30 3.3X4X3.5 MM
- STUMP UNIVERSAL CM 30 3.3X6X1.5 MM
- STUMP UNIVERSAL CM 30 3.3X6X2.5 MM
- STUMP UNIVERSAL CM 30 3.3X6X3.5 MM
- STUMP UNIVERSAL CM 30 4.5X4X2.5 MM
- STUMP UNIVERSAL CM 30 4.5X4X3.5 MM
- STUMP UNIVERSAL CM 30 4.5X6X1.5 MM
- STUMP UNIVERSAL CM 30 4.5X6X2.5 MM
- STUMP UNIVERSAL CM 30 4.5X6X3.5 MM
- STUMP UNIVERSAL CM 303.3X4X1.5 MM
- STUMP UNIVERSAL CM 303.3X4X2.5 MM
- STUMP UNIVERSAL CM 304.5X4X1.5 MM
- STUMP UNIVERSAL EXACT CM 173.3X4X.1.5 MM
- STUMP UNIVERSAL EXACT CM 173.3X4X2.5 MM
- STUMP UNIVERSAL EXACT CM 173.3X4X3.5 MM
- STUMP UNIVERSAL EXACT CM 173.3X6X1.5 MM
- STUMP UNIVERSAL EXACT CM 173.3X6X2.5 MM
- STUMP UNIVERSAL EXACT CM 173.3X6X3.5 MM
- STUMP UNIVERSAL EXACT CM 174.5X4X1.5 MM
- STUMP UNIVERSAL EXACT CM 174.5X4X2.5 MM
- STUMP UNIVERSAL EXACT CM 174.5X4X3.5 MM
- STUMP UNIVERSAL EXACT CM 174.5X6X1.5 MM
- STUMP UNIVERSAL EXACT CM 174.5X6X2.5 MM
- STUMP UNIVERSAL EXACT CM 174.5X6X3.5 MM
- STUMP UNIVERSAL EXACT CM 3.3X4X2.5 MM
- STUMP UNIVERSAL EXACT CM 3.3X6X0.8 MM
- STUMP UNIVERSAL EXACT CM 303.3X4X1.5 MM
- STUMP UNIVERSAL EXACT CM 303.3X4X2.5 MM
- STUMP UNIVERSAL EXACT CM 303.3X4X3.5 MM
- STUMP UNIVERSAL EXACT CM 303.3X6X1.5 MM
- STUMP UNIVERSAL EXACT CM 303.3X6X2.5 MM
- STUMP UNIVERSAL EXACT CM 303.3X6X3.5 MM
- STUMP UNIVERSAL EXACT CM 304.5X4X1.5 MM
- STUMP UNIVERSAL EXACT CM 304.5X4X2.5 MM
- STUMP UNIVERSAL EXACT CM 304.5X4X3.5 MM
- STUMP UNIVERSAL EXACT CM 304.5X6X1.5 MM
- STUMP UNIVERSAL EXACT CM 304.5X6X2.5 MM
- STUMP UNIVERSAL EXACT CM 304.5X6X3.5 MM
- STUMP UNIVERSAL EXACT CM3.3X4X0.8 MM
- STUMP UNIVERSAL EXACT CM3.3X4X1.5 MM
- STUMP UNIVERSAL EXACT CM3.3X4X3.5 MM
- STUMP UNIVERSAL EXACT CM3.3X4X4.5 MM
- STUMP UNIVERSAL EXACT CM3.3X4X5.5 MM
- STUMP UNIVERSAL EXACT CM3.3X6X1.5 MM
- STUMP UNIVERSAL EXACT CM3.3X6X2.5 MM
- STUMP UNIVERSAL EXACT CM3.3X6X3.5 MM
- STUMP UNIVERSAL EXACT CM3.3X6X4.5 MM
- STUMP UNIVERSAL EXACT CM3.3X6X5.5 MM
- STUMP UNIVERSAL EXACT CM4.5X4X0.8 MM
- STUMP UNIVERSAL EXACT CM4.5X4X1.5 MM
- STUMP UNIVERSAL EXACT CM4.5X4X2.5 MM
- STUMP UNIVERSAL EXACT CM4.5X4X3.5 MM
- STUMP UNIVERSAL EXACT CM4.5X4X4.5 MM
- STUMP UNIVERSAL EXACT CM4.5X4X5.5 MM
- STUMP UNIVERSAL EXACT CM4.5X6X0.8 MM
- STUMP UNIVERSAL EXACT CM4.5X6X1.5 MM
- STUMP UNIVERSAL EXACT CM4.5X6X2.5 MM
- STUMP UNIVERSAL EXACT CM4.5X6X3.5 MM
- STUMP UNIVERSAL EXACT CM4.5X6X4.5 MM
- STUMP UNIVERSAL EXACT CM4.5X6X5.5 MM
- STUMP UNIVERSAL WS 4.5X4X1.5 MM
- STUMP UNIVERSAL WS 4.5X4X3.5 MM
- STUMP UNIVERSAL WS 4.5X6X1.5 MM
- STUMP UNIVERSAL WS 4.5X6X2.5 MM
- STUMP UNIVERSAL WS 4.5X6X3.5 MM
- STUMP UNIVERSAL WS4.5X6X0.8MM
- STUMP WITHOUT SHOULDER ROTATION
- STUMP WITHOUT SHOULDER SCREW
- STUMP WITHOUT SHOULDER SCREW
- STUMP WITHOUT SHOULDER SCREW
- STUMP WS 1.5 MM
- STUMP WS 2.5 MM
- STUMP WS 3.5 MM
- SURGICAL DRILLS
- SURGICAL INSTRUMENTS FOR THE APPLICATION OF METHODS OF SYNTHESIS
- SURGICAL KIT BRÅNEMARK SYSTEM ® ZYGOMA
- SURGICAL PROBE
- SURGICAL TRAY JDEVOLUTION
- SURGICAL TRAY JDEVOLUTION PLUS
- SURGICAL TRAY W / DRILL STOPS JDEVOLUTION
- SURGICAL TRAY W / DRILL STOPS JDEVOLUTION PLUS
- SURGICAL TRAY W / NEW DRILL STOPS JDEVOLUTION
- SURGICAL TRAY W / NEW DRILL STOPS JDEVOLUTION PLUS
- SY ABUTMENT
- SY CAP SCREW
- SYNOCTA RN ® COMPONENT SECONDARY ANGLE OF 20 °, LONG TYPE A, H 6.7 MM, TI
- SYNOCTA RN ® COMPONENT SECONDARY ANGLE OF 20 °, LONG, TYPE B, H 6.7 MM TI
- SYNOCTA RN ® COMPONENT SECONDARY ANGLE OF 20 °, SHORT, TYPE A, H 5.7 MM, TI
- SYST BMK ZYGOMA PILOT DRILL 3.5MM SHORT
- SYST BMK ZYGOMA TWIST DRILL 2.9 MM SHORT
- SYSTEM ANALOGUE FOR LP HEX EST
- SYSTEM ANALOGUE FOR MP HEX EST
- SYSTEM ANALOGUE FOR MP SYSTEM CONVENIENT
- SYSTEM ANALOGUE FOR PLANT SP CONOMETRIC
- SYSTEM HEALING SCREW H 3 FOR HEX EST SYSTEM SP
- SYSTEM INTUS-K ¿3.30 X 13- SP
- SYSTEM INTUS-K ¿30.3 X 11.5- SP
- SYSTEM INTUS-K Ø 3.30 X 10- SP
- SYSTEM INTUS-K Ø 3.30 X 8.5- SP
- SYSTEM ONE-ABT
Medical Devices