List of devices falling within Class SURGICAL DENTAL DEVICES - OTHERS - codice: Q010399
In this list are all medical devices registered by the ministry of health which belong to the class Q010399Click on the letter will appear in the medical devices belonging to the class that start with that letter
- T1
- T10
- T13
- T13 INSERTER
- T17
- T2
- T2
- T25 B
- T3
- T3
- T3 I6B
- T3A
- T4
- T5
- T5 1.2
- T8
- T9
- T9
- TAD INSTRUMENTS IN STEEL AND TITANIUM
- TAP
- TAP
- TAP
- TAP
- TAP
- TAP
- TAP FOR IMAX SYSTEM
- TAP FOR IMAX SYSTEM
- TAP FOR PLANT S1B
- TAP FOR PLANT S1B
- TAP FOR PLANT S1B
- TAP FOR PLANTS DIAMETER 3.3
- TAP FOR PLANTS DIAMETER 3.8
- TAP FOR PLANTS DIAMETER 4.5
- TAP FOR PLANTS DIAMETER 5.2
- TAP L. 30MM D. 3.30 MM
- TAP L. 30MM D. 3.75
- TAP L. 30MM D. 4.00
- TAP L. 30MM D. 4.90
- TAP L. 40MM D. 3.30
- TAP L. 40MM D. 3.75
- TAP L. 40MM D. 4.00
- TAP L. 40MM D. 4.90
- TAPER DRILL TWO
- TAPER DRILL TWO
- TAPER DRILL TWO
- TAPPING
- TAPPING
- TAPPING
- TAPPING
- TAPPING
- TAPPING
- TAPPING
- TAPPING
- TAPPING
- TAPPING
- TAPPING
- TAPPING
- TAPPING
- TAPPING
- TAPPING
- TAPPING
- TAPPING
- TAPPING
- TAPPING
- TAPPING
- TAPPING
- TAPPING
- TAPPING
- TAPPING
- TAPPING
- TAPPING
- TAPPING
- TAPPING
- TAPPING CORE V2
- TAPPING FACILITY
- TAPPING GUIDED SURGERY ALVIM 4.3 MM
- TAPPING GUIDED SURGERY ALVIM NARROW 3.5 MM
- TAPPING GUIDED SURGERY ALVIM3.5 MM
- TAPPING K-CORE
- TAPPING SYSTEM BARREL DIA 3.5 (GUIDED SURGERY)
- TAPPING SYSTEM BARREL DIA 4.0
- TAPPING SYSTEM BARREL DIA 4.0 (GUIDED SURGERY)
- TAPPING SYSTEM BARREL DIA 4.5
- TAPPING SYSTEM BARREL DIA 4.5 (GUIDED SURGERY)
- TAPPING SYSTEM BARREL DIA 5.0
- TAPPING SYSTEM BARREL DIA 5.0 (GUIDED SURGERY)
- TAPPING SYSTEM BARREL DIA 5.5
- TAPPING SYSTEM BARREL DIA 5.5 (GUIDED SURGERY)
- TAPPING SYSTEM D3 - D4 DIAM 3.5
- TAPPING SYSTEM D3 - D4 DIAM 3.5 (GUIDED SURGERY)
- TAPPING SYSTEM D3 - D4 DIAM 4.0
- TAPPING SYSTEM D3 - D4 DIAM 4.0 (GUIDED SURGERY)
- TAPPING SYSTEM D3 - D4 DIAM 4.5
- TAPPING SYSTEM D3 - D4 DIAM 4.5 (GUIDED SURGERY)
- TAPPING SYSTEM D3 - D4 DIAM 5.0
- TAPPING SYSTEM D3 - D4 DIAM 5.0 (GUIDED SURGERY)
- TAPPING SYSTEM D3 - D4 DIAM 5.5
- TAPPING SYSTEM D3 - D4 DIAM 5.5 (GUIDED SURGERY)
- TAPPING SYSTEM TAPER BORE 3.5 (GUIDED SURGERY)
- TAPPING SYSTEM TAPER BORE 4.0 (GUIDED SURGERY)
- TAPPING SYSTEM TAPER BORE 4.5 (GUIDED SURGERY)
- TAPPING SYSTEM TAPER BORE 5.0 (GUIDED SURGERY)
- TAPPING SYSTEM TAPER BORE 5.5 (GUIDED SURGERY)
- TD
- TDC
- TDCI
- TDCS
- TDCST
- TDE
- TDIT
- TDL
- TDM
- TDS
- TE CUTTER COUNTERSUNK, Ø 3.3 MM, RN, 37 MM, GUIDED
- TE CUTTER COUNTERSUNK, Ø 4.1 MM, RN, 37 MM, GUIDED
- TECHNOIMPLANT
- TEMPORARY ABUTMENTS
- THERMAPREP ® PLUS
- THESIS DENTAL HANDPIECES LOW SPEED
- THIN SYSTEM WITH HITCH BALL
- THREE 4.25 / 5.204 STEEL MILL
- THREE 4.25 / 5.204 STEEL MILL
- THREE STEEL MILL 10/11.104
- THREE STEEL MILL 10/11.204
- THREE STEEL MILL 4/5.204
- THREE STEEL MILL 4/5.204
- THREE STEEL MILL 5/6.204
- THREE STEEL MILL 5/6.204
- THREE STEEL MILL 6/7.204
- THREE STEEL MILL 6/7.204
- THREE STEEL MILL 6/7.205
- THREE STEEL MILL 6/7.205
- THREE STEEL MILL 7/8.204
- THREE STEEL MILL 7/8.204
- THREE STEEL MILL 7/8.205
- THREE STEEL MILL 7/8.205
- THREE STEEL MILL 8/9.104
- THREE STEEL MILL 8/9.204
- THREE STEEL MILL 8/9.205
- THREE STEEL MILL 8/9.205
- THREE STEEL MILL 9/10.104
- THREE STEEL MILL 9/10.204
- TILLER PILOT 3.8 / 4.3 MM
- TILLER PILOT 4.3 / 5.3 MM
- TILLER PILOT 4.3 / 5.3 MM
- TILLER PILOT CM 2.8 / 3.5 MM
- TILLER PILOT CM 3.0 / 3.75 MM
- TILLER PILOT CM 3.3 / 4.0 MM
- TILLER PILOT CM 3.6 / 4.3 MM
- TILLER PILOT CM 4.3 / 5.0 MM
- TILLER PILOT CM 5.3 / 6.0 MM
- TILLER PILOT D. FROM 2.00 TO 3.00
- TILLER PILOT D. FROM 3.00 TO 4.00
- TILLER PILOT GUIDED SURGERY 3.75 MM
- TILLER PILOT GUIDED SURGERY STRAIT
- TILLER PILOT, Ø 2,2 MM LONG, 20MM-DRIVEN
- TILLER PILOT, Ø 2.2 MM, SHORT, GUIDED 16MM-
- TIPPER OF GAYGER WITH INTERNAL COOLING
- TISSUE PUNCH GUIDE D 3.5
- TISSUE PUNCH GUIDE D 4.2
- TISSUE PUNCH GUIDE D 5.0
- TKM
- TKM
- TKS
- TOMAS PI
- TOOL FOR SCREWING
- TOOL FOR SCREWING
- TOOL FOR SCREWING
- TOOL FOR SCREWING
- TOOL FOR SCREWING
- TOOL FOR SCREWING
- TOOL FOR SCREWING
- TOOL FOR SCREWING
- TOOL FOR SCREWING
- TOOL FOR SCREWING
- TOOL FOR SCREWING
- TOOL FOR SCREWING
- TOOL FOR SCREWING
- TOOL FOR SCREWING
- TOOL FOR SCREWING
- TOOL FOR SCREWING
- TOOL FOR SCREWING
- TOOL FOR SCREWING
- TOOL FOR SCREWING
- TOOL FOR SCREWING
- TOOL FOR SCREWING
- TOOL FOR SCREWING
- TOOL FOR SCREWING
- TOOL SYSTEMS FOR MICROMOTOR
- TOOLS / ACCESSORIES STEEL X IMP / CUTTERS
- TOOLS / ACCESSORIES TITANIUM X IMP / CUTTERS
- TOOLS FOR CROWNS / DAMS / DIES
- TOOLS FOR CROWNS / DAMS / DIES
- TOOLS FOR CROWNS / DAMS / DIES
- TOOLS FOR CROWNS / DAMS / DIES
- TOOLS FOR CROWNS / DAMS / DIES
- TOOLS FOR CROWNS / DAMS / DIES
- TOOLS FOR CROWNS / DAMS / DIES
- TOOLS FOR CROWNS / DAMS / DIES
- TOOLS FOR CROWNS / DAMS / DIES
- TOOLS FOR CROWNS / DAMS / DIES
- TOOLS FOR CROWNS / DAMS / DIES
- TOOLS FOR CROWNS / DAMS / DIES
- TOOLS FOR CROWNS / DAMS / DIES
- TOOLS FOR CROWNS / DAMS / DIES
- TOOLS FOR CROWNS / DAMS / DIES
- TOOLS FOR CROWNS / DAMS / DIES
- TOOLS FOR CROWNS / DAMS / DIES
- TOOLS FOR SEALING RINGS
- TOOLS FOR TAD
- TOOLS FOR TAD IN STEEL
- TORQUE WRENCH
- TORQUE WRENCH ADAPTER PROSTHETIC
- TORQUE WRENCH DRIVER EV SURGICAL HANDLE
- TORQUE WRENCH DRIVER HANDLE LOW RESTORATIVE
- TP17 23
- TRAINER OF SHOULDER F33SP
- TRAINER OF SHOULDER F38F
- TRAINER OF SHOULDER F38SP
- TRAINER OF SHOULDER F45F
- TRAINER OF SHOULDER F45SP
- TRAINER OF SHOULDER F59F
- TRAINER OF SHOULDER FZT38F
- TRAINER OF SHOULDER FZT45F
- TRAINER SHOULDER F59SP
- TRAINER SHOULDER FZT52F
- TRAINER SHOULDER FZT59F
- TRANSFER
- TRANSFER
- TRANSFER
- TRANSFER
- TRANSFER
- TRANSFER
- TRANSFER FOR ORTHO
- TRANSFER IMPRESSION INDIRECT
- TRAY IG 47 HOLES
- TRAY SMART 28 HOLES
- TRISPADE 350 STEEL MILL
- TRISPADE 375 STEEL MILL
- TRISPADE 375 STEEL MILL
- TRISPADE 400 STEEL MILL
- TRISPADE 400 STEEL MILL
- TRISPADE 425 STEEL MILL
- TRISPADE 425 STEEL MILL
- TUNGSTEN CARBIDE CUTTER H1.104.008 CHIR
- TUNGSTEN CARBIDE CUTTER H1.104.008 CHIR
- TUNGSTEN CARBIDE CUTTER H2.104.010 CHIR
- TUNGSTEN CARBIDE CUTTER H2.104.010 CHIR
- TUNGSTEN CARBIDE CUTTER H703.FGSL .. 021
- TUNGSTEN CARBIDE CUTTER H703.FGSL .. 021
- TUNGSTEN CARBIDE CUTTER HXU254 FG/314
- TUNGSTEN CARBIDE CUTTER HXU254 FG/314
- TUNGSTEN CARBIDE CUTTER HXU7368 CASL
- TUNGSTEN CARBIDE CUTTER HXU7368 CASL
- TUNGSTEN CARBIDE CUTTER HXU7831 CASL
- TUNGSTEN CARBIDE CUTTER HXU7831 CASL
- TUNGSTEN CARBIDE CUTTER L.010 HXU141.CA
- TUNGSTEN CARBIDE CUTTER L.010 HXU141.CA
- TUNGSTEN CARBIDE CUTTER L.014 HXU141.CA
- TUNGSTEN CARBIDE CUTTER L.014 HXU141.CA
- TUNGSTEN CARBIDE CUTTER L.018 HXU141.CA
- TUNGSTEN CARBIDE CUTTER L.018 HXU141.CA
- TUNGSTEN CARBIDE CUTTER L.023 HXU141.CA
- TUNGSTEN CARBIDE CUTTER L.023 HXU141.CA
- TUNGSTEN CARBIDE CUTTER LASER POINT
- TUNGSTEN CARBIDE CUTTERS
- TUNGSTEN CARBIDE CUTTERS
- TUNGSTEN CARBIDE CUTTERS
- TUNGSTEN CARBIDE CUTTERS
- TUNGSTEN CARBIDE CUTTERS
- TUNGSTEN CARBIDE CUTTERS
- TUNGSTEN CARBIDE CUTTERS
- TUNGSTEN CARBIDE CUTTERS
- TUNGSTEN CARBIDE CUTTERS
- TUNGSTEN CARBIDE CUTTERS
- TUNGSTEN CARBIDE CUTTERS
- TUNGSTEN CARBIDE CUTTERS
- TUNGSTEN CARBIDE CUTTERS
- TUNGSTEN CARBIDE CUTTERS
- TUNGSTEN CARBIDE CUTTERS
- TUNGSTEN CARBIDE CUTTERS
- TUNGSTEN CARBIDE CUTTERS
- TWEEZER
- TWIST DRILL, DRILL PILOT, CORTICAL DRILL, DRILL CONICAL
- TWO DIAMOND CUTTER TAPER
- TWO DIAMOND CUTTER TAPER
- TWO DIAMOND CUTTER TAPER
Medical Devices