Medical Devices
List of devices made by the manufacturer E. JANACH SRL
Number of products: 2280
Tax Code: 01557980131
Click on the letter will appear in the medical device manufacturer that begin with that letter
- TANK PARTS IN SILICON BACK TO FLUSH J3780
- TANK REPLACEMENT SILICONE BACK J3770 FLUSH
- TELO LASIK BILATERAL, DOUBLE POCKET COLLECTION
- THE CALIPER CAPSULOREXIS BURATTO, TITANIUM HANDLE ROUND, ANGLE, APEX CANT
- THE HOOK RETRACTOR AUBARET
- THE NUCLEUS MANIPOLATORE, ELBOW, CANT, KOCH MODEL
- THE NUCLEUS ROTATOR, VERTICAL
- THERAPEUTIC LENS TO REMOVE CLAMP, SOCKET RING, CURVE
- TITANIUM FORCEPS, ANGLED 11MM., KELMANMC.PHERSON TO HANDLE FLAT
- TITANIUM HANDLE FOR INFUSION, LL
- TITANIUM HANDLE SUCTION LL
- TITANIUM MC.PINZA, ERGONOMIC, 11 CM STRAIGHT, 1X2 TEETH TO 0.10 MM AND PPF
- TO BLEPHAROSTAT CORCELLE, 13MM VALVE CLOSED
- TO BLEPHAROSTAT FACO, BANDY, MONOFILAMENT, VALVE TO 15MM., MOD.CROZAFON
- TO CLAMP FIXING OF REMKY, FORK, ANGLED, 1X2 WITH TEETH GOVERNED
- TO CLAMP FIXING OF VON DAMM MANDACH JACK. 3
- TO CLAMP HEMOSTASIS HARTMANN CM.10 WITHOUT TEETH
- TO CLAMP HEMOSTASIS HARTMANN CM.10 WITHOUT TEETH
- TO CLAMP HEMOSTASIS HARTMANN CM.10 WITHOUT TEETH
- TO CLAMP SURGICAL SKIN, WITH 11 CM 1X2 TEETH TO 1.3 MM STRAIGHT STRONG
- TO HOOK A ROLLET 4 TEETH BEVELS MM.5
- TO HOOK RETRACTOR RING INTRASTROMAL, TITANIUM HANDLE, TURQUOISE
- TO INSERT PLIER ERGONOMIC FOLDING IOL, MOD.STABIBAG-SIFIS
- TO INSERT PLIER ERGONOMIC SOFT IOL, DIRECT ACTION
- TO REMOVE EPITHELIUM SPATULA HANDLE ERGOCOLOUR ORANGE, MOD. VINCIGUERRA
- TO REMOVE THE SCISSORS ANGLED IOL, BLADES TO GENTLE 6MM, TITANIUM
- TO TUBE 0.50 MM., LINE, I CANT HOOK TO, OPEN TOE
- TONOMETER MARKER FOR
- TOOL FOR STRIAE-TEST TECHNIQUE FOR LASIK FLAP CONTROL GRIP OF PINELLI
- TORQUE TUBE BIMANUAL, A. / I. 0.35 AND 0.45MM, LITTLE CURVE WITH HANDLES
- TOURNIQUET HARTMANN, CM.10 1X2 TEETH WITH
- TRABECULOTOMO MACKENSEN, LEFT, MM. 7
- TRABECULOTOMO MACKENSEN, RIGHT, MM. 7
- TRABECULOTOMO OF HARMS, DUAL, LEFT
- TRANSPARENT BOX 40 X 27 X 4 CM. CARPET WITH SILICONE, DRILLED, TWO FLOORS.
- TROCAR X ENDOSCOPY DUAL ROUTE OF ENTRY, CURVED
- TROUTMAN COLIBRI FORCEPS 1X2 WITH TEETH BY OBLIQUE MM.0, 12 AND PPF
- TROUTMAN COLIBRI FORCEPS 1X2 WITH TEETH BY OBLIQUE MM.0, 25 E PPF
- TROUTMAN COLIBRI FORCEPS 1X2 WITH TEETH BY OBLIQUE MM.0, 40 AND PPF
- TUBE 20G SALLUSTIO ARM 40MM., 4 HOLES DISTAL, MOD.MAGNI
- TUBE 23G SALLUSTIO ARM 40MM., 4 HOLES DISTAL, MOD.MAGNI
- TUBE 25G SALLUSTIO ARM 40MM., 4 HOLES DISTAL, MOD.MAGNI
- TUBE A / I CURVE
- TUBE A / I, TIP 45 ° ANGLE WITH SILICONE SLEEVE
- TUBE A / I, TIP 45 ° ANGLE WITH SILICONE SLEEVE
- TUBE A / I, TIP 90 ° ANGLE
- TUBE A / I, TIP 90 ° ANGLE
- TUBE A / I, Ø1MM TIP 45 ° ANGLE FOR USE WITH SILICONE SLEEVE J2239.10
- TUBE A / STRAIGHT
- TUBE A / W, 45 ° ANGLED TIP
- TUBE A / W, 45 ° ANGLED TIP
- TUBE ANGLE FINE CORNEAL CUTS FOR WASHING AND PUMP SILICONE
- TUBE BEND FOR INFILTRATION, BOTTOM HOLE, DIAM.ESTERNO 1.6 MM, LENGTH 9 CM., FITTING MASTER
- TUBE BEND FOR INFILTRATION, SUPERIOR COURT, DIAM.ESTERNO 1.6MM, LENGTH 9CM. FITTING MASTER
- TUBE BEND IN BLUNT TIP WITH HOLE AMPIOS UPERIORE, MOD.AVOLIO
- TUBE BEND INFUSION 0.80 MM GLOSSY, WITH TWO HOLES 0.45
- TUBE BEND WAY LACRIMAL, CONE LL MM.0, 60X25
- TUBE BY INFUSION OF 20G, 7MM
- TUBE CLOSED TOE, 23G, WITH HOLE UPPER LENGTH 20 MM.
- TUBE CONE CURVE BUTTONED LL, MM 0.70 X21
- TUBE DIMC INTYRE TWO HOLES FOR A / I, STRAIGHT
- TUBE FOR A . / I. PENNE, FLAT CURVE, THE SAME TWO HOLES LARGE
- TUBE FOR A / I. 12 HOURS OF SIMCOE, DS.
- TUBE FOR A / I. OF SIMCOE, FLAT CURVE, INFUSION RIGHT SIDE
- TUBE FOR A / I. OF SIMCOE, FLAT CURVE, LEFT SIDE INLET
- TUBE FOR A / I. OF SIMCOE, FLAT CURVE, LEFT SIDE INLET
- TUBE FOR A / W OF SIMCOE, FLAT CURVE, LEFT SIDE INFUSION
- TUBE FOR A. / I. 12 HOURS OF SIMCOE, SIN.
- TUBE FOR AC AIR ANGLE OF RYCROFT 7MM, 26G, DA 0,45 X20MM, LL CONE
- TUBE FOR AC AIR ANGLE OF RYCROFT 7MM, DA 0,30 X20MM, LL CONE
- TUBE FOR AC AIR CONE CURVE 2 MM. 0.30 X20
- TUBE FOR AC AIR CONE CURVE LL, MM.0, 30X20
- TUBE FOR AIR CA SAUTTER END OF CURVE BLUNT
- TUBE FOR AIR CA STRAIGHT CONE LL, MM.0.30X20
- TUBE FOR ANAESTHESIA SOTTOTENONIANA, FOR TUMBLER, ANGLE, FLAT, ARCHED
- TUBE FOR CLEANING HYDRODISSECTION-MASS, 0.40MM., ANGLED FOR 12 HOURS OF RAVALICO
- TUBE FOR COAXIAL PERFLUORO, 20G
- TUBE FOR DCR, GUIDE FOR LASER PROBE MODEL DR. NIJS
- TUBE FOR DLK 25G LOWER HOLE Ø0.4 MM, CURVE, MOD. FOUNTAIN
- TUBE FOR DLK 27G, BOTTOM HOLE Ø0.4 MM, CURVE, MOD. FOUNTAIN
- TUBE FOR DLK, 27G, ANGLED AND SPATULA, BOTTOM HOLE Ø0.3 MM MOD. FIGINI
- TUBE FOR DMEK
- TUBE FOR DSEK, ANGLED 12MM, CURVED ARM, DISH, Ø 0.40 MM, HOLE FRONT
- TUBE FOR ENT, 2 MM DIAMETER, LENGTH 11 CM, OPEN TOE
- TUBE FOR HEALON , ANGLED 7MM, TAPER FROM 0.60 TO 0.40 MM, LL CONE
- TUBE FOR HEALON, ANGLED 12MM FROM 0.40 X 25MM, CONE LL
- TUBE FOR HEALON, ANGLED 12MM, 25MM X 0,50, CONE LL
- TUBE FOR HEALON, ANGLED 7MM FROM 0.60 X 25MM, CONE LL
- TUBE FOR HYDRODISSECTION FROM 0.40 MM. ANGLE, FLAT, FOR 12 HOURS OF MOROCUTTI
- TUBE FOR HYDRODISSECTION, 25G, CURVE
- TUBE FOR HYDRODISSECTION, FLAT 12MM , ANGLED, 22MM X 0:50
- TUBE FOR INFILTRATION ANESTHETICS, CLOSED TOE, 15FORI SPIRAL ØEXT 2 MM, L 320 MM
- TUBE FOR INFILTRATION ANESTHETICS, CLOSED TOE, 6 HOLES ASPIRALE ØEXT 1.5 MM, L 150 MM
- TUBE FOR INFILTRATION ANESTHETICS, CLOSED TOE, 6 HOLES SPIRAL ØEXT 1.5 MM, L 200 MM
- TUBE FOR INFILTRATION ANESTHETICS, CLOSED TOE, 6 HOLES SPIRAL ØEXT 1.5 MM, L 250 MM
- TUBE FOR INFILTRATION ANESTHETICS, CLOSED TOE, 6 HOLES SPIRAL ØEXT 1.5 MM, L 300 MM
- TUBE FOR IRRIGATION TECHNOLOGY IN CORNEAL FLAP LASIK, MODEL KERCHIEF
- TUBE FOR MASS MEDIA, LL CONE
- TUBE FOR MASSES BIG, LL CONE
- TUBE FOR OIL SILICONE STRAIGHT 23G, L = 3 MM
- TUBE FOR OIL SILICONE STRAIGHT, 0.90 X 4 CM., MOD.DE MOLFETTA
- TUBE FOR SINGLE STEP DLK 27G, BIG BUBBLE SHEET, Ø0.3 FORUM, MOD. MACALUSO
- TUBE FOR SLADE CORNEAL FLAP FOR IRRIGATION
- TUBE FOR VISCOCANALOSTOMY, 0.50 X 0.20 MM., PIRAZZOLI MODEL
- TUBE FOR VISCOELASTIC SUBSTANCES DA0.50X22MM, LL USA ANGLED 12MM
- TUBE FOR VISCOELASTIC, STRAIGHT, 4 X 1.2 CM
- TUBE HYDRODISSECTION / EVACUATION BUBBLES FOR TECHNICAL FEMTOLASER
- TUBE I / A EXCHANGE FOR FLUIDS, 18G, TWO-WAY, LENGTH 32MM
- TUBE I / A STRAIGHT LINE
- TUBE I / A TIP 150 ° FOR 12 HOURS
- TUBE I / A TIP 150 ° FOR 12 HOURS
- TUBE I / A, 45TH TIP FOR SILICONE SLEEVE FOR MICS (1.8 MM)
- TUBE INTAKE PROCEDURE NATUREAL, L = 20CM, 2.8MM Ø = LL ATTACK OR LIPOMATIC
- TUBE INTAKE PROCEDURE NATUREAL, L = 25CM, 2.8MM Ø = LL ATTACK OR LIPOMATIC
- TUBE INTAKE PROCEDURE NATUREAL, L = 30CM, Ø = 2.8MM OR ATTACK LL LIPOMATIC
- TUBE MCINTYRE, TWO HOLES FOR INFUSION AND INTAKE, ANGLED
- TUBE OF BANGERTER, LITTLE CURVE BLUNT, TO 0.6 X 25MM FOR CHILDREN, LL CONE
- TUBE OF BANGERTER, SLIGHTLY CURVED BLUNT, TO 0.5 MM., LENGTH 65 MM, LL CONE
- TUBE OF BANGERTER, SLIGHTLY CURVED BLUNT, TO 0.6MM., CHILDREN'S CONE LL
- TUBE OF BANGERTER, SLIGHTLY CURVED BLUNT, TO 0.8MM., CHILDREN'S CONE LL
- TUBE OF BANGERTER, STRAIGHT FROM 0.8 X 38MM., CHILDREN'S CONE LL
- TUBE OF BANGERTER, STRAIGHT FROM 0.8 X 40MM., LL CONE
- TUBE OF BANGERTER, STRAIGHT, BLUNT, TO 0.6 X 20MM FOR CHILDREN, LL CONE
- TUBE OF CHARLEUX, BEND, SHORT, DA 0.60 X 15MM., OPEN TOE
- TUBE OF CHARLEUX, CURVE, LONG, 0.60 X 20MM OPEN TOE
- TUBE OF CORYDON FOR HYDRODISSECTION, 0.50 MM., CURVE, FRONT BAR, LEFT
- TUBE OF CURVE BUTTONED KRATZ, ROUGH, 0.50 MM., OPEN TOE
- TUBE OF GALAND, 0.50MM., ANGLED TO CANT HOOK FOR 12 HOURS, OPEN TOE
- TUBE OF SIMCOE, CURVE FOR INFUSION AND INTAKE WITH TEFLON
- TUBE OF VISCOELASTIC GIANNETTI FOR CAPSULOREXI POSTER.10 MM X 0:20
- TUBE SCRAPER, ANGLED 2MM, ROUGH, DA 0.50MM., OPEN TOE
- TUBE STRAIGHT CONE 2 LACRIMAL VIE
- TUBE STRAIGHT CONE BUTTONED LL, MM 0.40 X21
- TUBE STRAIGHT CONE TAPER SILVER LL
- TUBE STRAIGHT CONE WAY LACRIMAL LL MM. 0.60 X25
- TUBE STRAIGHT CONE WAY LACRIMAL LL MM.0, 60 X 12
- TUBE STRAIGHT CONE WAY LACRIMAL LL, 25G X 15MM 00:50
- TUBE STRAIGHT CONE WAY LACRIMAL LL, 25G X 15MM 00:50
- TUBE STRAIGHT FOR INFILTRATION, APEX BOTTONUTO, OPEN TOP, OUTER Ø 1.6 MM, LENGTH 5CM
- TUBE STRAIGHT FOR INFILTRATION, APEX BOTTONUTO, OPEN TOP, Ø 1.6 MM, LENGTH 16 CM
- TUBE STRAIGHT FOR INFILTRATION, APEX FLUTING, OPEN TOP, Ø EST. 1.6 MM, LENGTH 5 CM
- TUBE STRAIGHT FOR INFILTRATION, CLOSED TOE, Ø EXTERIOR 1:06 MM, LENGTH 51MM, FITTING MASTER
- TUBE STRAIGHT FOR INFILTRATION, OPEN TOP, OUTER Ø 1.6 MM, LENGTH 50CM, FITTING MASTER
- TUBE STRAIGHT INTUBATION INFUSION AND WAYS LACRIMAL, 23G.
- TUBE STRAIGHT, 23G, INFUSION FRONT, 15MM., LL FITTING
- TUBE STRAIGHT, 23G, INFUSION FRONT, 27MM., LL FITTING
- TUBE TAPER SILVER CONE CURVE LL
- TUBE TO 1.0 MM, MICROANSA WITH A HOLE AND FRONT
- TUBE TO 1.20 MM. ANSA WITH A HEART AND TWO HOLES, FRONT MODEL GALLENGA
- TUBE TO 1.20 MM., ANSA WITH THREE HOLES, FRONT LITTLE BEND, MODEL PEARCE
- TUBE TO BY INFUSION 20G 5MM
- TUBE TO HOOK FOR HYDRO-CORE ROTATION FROM 0.40MM, CAPOROSSI OF
- TUBE TO INJECT PERFLUOROCARBON LIQUID, 23G, STRAIGHT, BLUNT
- TUBE TO INJECT PERFLUOROCARBON LIQUID, STRAIGHT, BLUNT, 0.50 X 23MM.
- TUBE TO INJECT PERFLUOROCARBON LIQUID, STRAIGHT, BLUNT, 0.70 X 40MM.
- TUBE TO LEVY ADIPOSE TISSUE, CLOSED TOE WITH OPEN LOOP, ØEXT 3 MM L 130 MM
- TUBE TO LEVY ADIPOSE TISSUE, CLOSED TOE WITH OPEN LOOP, ØEXT 3 MM L 200 MM
- TUBE TROUTMAN 25G, CURVE, WITH BULB END OF 1MM.
- TUBE TWO WAYS FOR INFUSION - VACUUM
- TUBE TWO WAYS, AND VACUUM INFUSION 12 HOURS OF BAQUIS
- TUBE WASH FOR CORNEAL FLAP LASIK, 5 HOLES, CLOSED TOE, MOD.FIASCHETTI
- TUBE WASH FOR CORNEAL FLAP LASIK, THREE HOLES, LEFT, MODEL ARTARIA
- TUBE WASH FOR CORNEAL FLAP LASIK, THREE HOLES, RIGHT , ARTARIA MODEL
- TUBE WASH FOR CORNEAL FLAP LASIKA FIVE HOLES, DRILL FLAT CLOSE, RIGHT
- TUBE WASH FOR CORNEAL FLAP LASIKA FIVE HOLES, DRILL FLAT CLOSE, SX
- TUBE WASHING CA CONE LL. MORE 'END
- TUBE WASHING CA19G, STRAIGHT, A NOSE FLUTE, 25MM
- TUBE WASHING CORNEA, LL CONE
- TUBE WASHING CORNEA, Ø 1,0 MM., ANGLED, LL CONE
- TUBE WASHING FOR CORNEAL FLAP LASIK, TUMBLER OF THREE HOLES, 0.60MM, FLAT
- TUMBLER FOR BENDING PLIERS AND 6.0MM 5.5 ACRYSOF IOL, SHORT HANDLE
- TUMBLER FOR BENDING PLIERS IOL SILICON FROM 6.0MM, CROSS
- TUMBLER FOR BENDING PLIERS SOFT LIO THREE POINTS OF SUPPORT