Medical Devices
List of devices made by the manufacturer OSTEOMED L.P.
Number of products: 6581
Click on the letter will appear in the medical device manufacturer that begin with that letter
- HAND DRILL 1.3MM-PLATING SYSTEM, MANUAL
- HAND PLATING SYSTEM - 1.0MM DRILL, J-LATCH
- HAND PLATING SYSTEM - 1.0MM DRILL, MANUAL
- HAND PLATING SYSTEM - 1.2MM/1.6MM COUNTERSINK, MANUAL
- HAND PLATING SYSTEM - 1.2MM/1.6MM PLATE HOLDING TAK
- HAND PLATING SYSTEM - 1.3MM DRILL, J-LATCH
- HAND PLATING SYSTEM - 1.5MM DRILL, J-LATCH
- HAND PLATING SYSTEM - 1.5MM DRILL, MANUAL
- HAND PLATING SYSTEM - 1.6MM DRILL GUIDE INSERT
- HAND PLATING SYSTEM - 1.6MM DRILL, J-LATCH
- HAND PLATING SYSTEM - 1.6MM DRILL, MANUAL
- HAND PLATING SYSTEM - 1.6MM DRILL, MANUAL
- HAND PLATING SYSTEM - 1.7MM DRILL CANNULATED, FUSION, MANUAL
- HAND PLATING SYSTEM - 1.7MM DRILL CANNULATED, FUSION, QUICK RELEASE
- HAND PLATING SYSTEM - 1.7MM DRILL CANNULATED, LONG, MANUAL
- HAND PLATING SYSTEM - 1.7MM DRILL CANNULATED, LONG, QUICK RELEASE
- HAND PLATING SYSTEM - 2.0/2.4/3.0/4.0 CANNULATED SCREW REMOVER
- HAND PLATING SYSTEM - 2.0/2.4/3.0/4.0MM CANNULATED DRILL GUIDE
- HAND PLATING SYSTEM - 2.0/2.4MM CANNULATED SHAFT SCREWDRIVER
- HAND PLATING SYSTEM - 2.0/2.4MM PROXIMAL CORTEX DRILL
- HAND PLATING SYSTEM - 2.0MM DRILL CANNULATED, FUSION, MANUAL
- HAND PLATING SYSTEM - 2.0MM DRILL CANNULATED, FUSION, QUICK RELEASE
- HAND PLATING SYSTEM - 2.0MM DRILL GUIDE INSERT
- HAND PLATING SYSTEM - 2.0MM DRILL, J-LATCH
- HAND PLATING SYSTEM - 2.0MM DRILL, MANUAL
- HAND PLATING SYSTEM - 2.0MM/2.4MM COUNTERSINK, MANUAL
- HAND PLATING SYSTEM - 2.0MM/2.4MM PLATE HOLDING TAK
- HAND PLATING SYSTEM - 2.3MM DRILL CANNULATED, MANUAL
- HAND PLATING SYSTEM - 2.3MM DRILL CANNULATED, QUICK RELEASE
- HAND PLATING SYSTEM - 2.4MM DRILL GUIDE INSERT
- HAND PLATING SYSTEM - 2.4MM DRILL PROXIMAL CORTEX, MANUAL
- HAND PLATING SYSTEM - 2.4MM DRILL, MANUAL
- HAND PLATING SYSTEM - 2.9MM DRILL PROXIMAL CORTEX, MANUAL
- HAND PLATING SYSTEM - 20 ° / 25 ° FUSION RECESS REAMER, QUICK RELEASE
- HAND PLATING SYSTEM - 30 ° / 35 ° FUSION RECESS REAMER, QUICK RELEASE
- HAND PLATING SYSTEM - 3MM PERIOSTEAL ELEVATOR, CURVED EDGE
- HAND PLATING SYSTEM - 3MM PERIOSTEAL ELEVATOR, STRAIGHT EDGE
- HAND PLATING SYSTEM - 40 ° / 45 ° FUSION RECESS REAMER, QUICK RELEASE
- HAND PLATING SYSTEM - 50 ° / 55 ° FUSION RECESS REAMER, QUICK RELEASE
- HAND PLATING SYSTEM - 6MM HOHMANN RETRACTOR
- HAND PLATING SYSTEM - 8MM HOHMANN RETRACTOR
- HAND PLATING SYSTEM - CANNULATED DEPTH GAUGE 4 INCH
- HAND PLATING SYSTEM - CANNULATED DEPTH GAUGE, DOUBLE-SIDED, FUSION
- HAND PLATING SYSTEM - CANNULATED SCREWDRIVER 2.0MM SHAFT, MANUAL
- HAND PLATING SYSTEM - CANNULATED SCREWDRIVER 2.4MM SHAFT, MANUAL
- HAND PLATING SYSTEM - DRIVER 2.0/2.4MM CANNULATED HEADLESS, SHORT
- HAND PLATING SYSTEM - DRIVER 3.0/4.0MM CANNULATED HEADLESS, SHORT
- HAND PLATING SYSTEM - FULLY THREADED SCREW 1.2MM DRILL GUIDE
- HAND PLATING SYSTEM - FULLY THREADED SCREW 1.6MM DRILL GUIDE
- HAND PLATING SYSTEM - FULLY THREADED SCREW 2.0MM DRILL GUIDE
- HAND PLATING SYSTEM - FULLY THREADED SCREW 2.4MM DRILL GUIDE
- HAND PLATING SYSTEM - FUSION K-WIRE/DRILL GUIDE
- HAND PLATING SYSTEM - GONIOMETER
- HAND PLATING SYSTEM - ON BONE PLATE HOLDER
- HAND PLATING SYSTEM - PLATE BENDER
- HAND PLATING SYSTEM - PLATE HOLDING FORCEPS, SWIVEL FOOT
- HAND PLATING SYSTEM - REDUCTION FORCEPS
- HAND PLATING SYSTEM - REDUCTION FORCEPS, K-WIRE GUIDE
- HAND PLATING SYSTEM - SCREW 2.0/2.4MM CANNULATED COUNTERSINK
- HAND PLATING SYSTEM - SCREW DEPTH GAUGE 1.2MM/1.6MM
- HAND PLATING SYSTEM - SCREW DEPTH GAUGE 2.0MM/2.4MM
- HAND PLATING SYSTEM - SCREWDRIVER 1.2MM SHAFT, MANUAL
- HAND PLATING SYSTEM - SCREWDRIVER 1.2MM SLEEVE
- HAND PLATING SYSTEM - SCREWDRIVER 1.6MM SLEEVE
- HAND PLATING SYSTEM - SCREWDRIVER 2.0MM SHAFT, MANUAL
- HAND PLATING SYSTEM - SCREWDRIVER 2.0MM SLEEVE
- HAND PLATING SYSTEM - SCREWDRIVER 2.4MM SHAFT, MANUAL
- HAND PLATING SYSTEM - SCREWDRIVER 2.4MM SLEEVE
- HAND PLATING SYSTEM - SHARP HOOK
- HAND PLATING SYSTEM - SMALL GRASPING FORCEPS
- HAND PLATING SYSTEM - TERMITE FORCEPS
- HAND PLATING SYSTEM - TRI-LOBE DRIVE SOLID CORE, SHORT, 3.0/4.0MM HEADLESS
- HAND PLATING SYSTEM - TRI-LOBE DRIVER SOLID CORE, SHORT, 2.0/2.4MM HEADLESS
- HEADLESS 2.0/2.4MM SOLID DRIVER, TAPERED
- HEADLESS 2.0/2.4MM SOLID DRIVER, TAPERED
- HEADLESS 3.0/4.0MM SOLID DRIVER, TAPERED
- HEADLESS 3.0/4.0MM SOLID DRIVER, TAPERED
- HEADLESS SCREW 2.0MM X 34MM, STERILE
- HEADLESS SCREW 2.0MM X 36MM, STERILE
- HEMI - HEMI GREAT TOE IMPLANT IMPACTOR
- HEMI - HEMI GREAT TOE IMPLANT INSTRUMENT KIT
- HEMI - HEMI GREAT TOE IMPLANT PUNCH
- HEMI - HEMI GREAT TOE IMPLANT SIZER, EXTRA SMALL / SMALL
- HEMI - HEMI GREAT TOE IMPLANT SIZER, MEDIUM / LARGE
- HEMI - HEMI GREAT TOE IMPLANT TRIAL, EXTRA SMALL
- HEMI - HEMI GREAT TOE IMPLANT TRIAL, LARGE
- HEMI - HEMI GREAT TOE IMPLANT TRIAL, MEDIUM
- HEMI - HEMI GREAT TOE IMPLANT TRIAL, SMALL
- HEMI GREAT TOE IMPLANT INSTRUMENT KIT
- HIGH TORQUE JACOBS CHUCK (450-0287-90 INCLUDED)
- HOOK DRILL GUIDE
- HOOK IMPACTOR
- HPS & 1.2MM SCREW PLATE MODULE II
- HPS & 1.2MM SCREW PLATE MODULE II
- HPS & 1.6MM SCREW PLATE MODULE II
- HPS & 1.6MM SCREW PLATE MODULE II
- HPS & 2.0MM SCREW PLATE MODULE II
- HPS & 2.0MM SCREW PLATE MODULE II
- HPS & 2.4MM SCREW PLATE MODULE II
- HPS & 2.4MM SCREW PLATE MODULE II
- HPS - .028 X 4 WIRE
- HPS - .035 X 4 K-WIRE
- HPS - .035 X 4 K-WIRE, DOUBLE TROCAR
- HPS - .045 X 4 K-WIRE
- HPS - 1.0MM DRILL , MANUAL
- HPS - 1.0MM DRILL, J-LATCH
- HPS - 1.0MM DRILL, OSTEOPOWER
- HPS - 1.2 MM OFFSET GRID PLATE, LEFT
- HPS - 1.2 MM OFFSET GRID PLATE, LEFT
- HPS - 1.2MM 3 X 8 T PLATE
- HPS - 1.2MM 3 X 8 T PLATE
- HPS - 1.2MM 4 X 8 T PLATE
- HPS - 1.2MM 4 X 8 T PLATE
- HPS - 1.2MM L PLATE, LEFT
- HPS - 1.2MM L PLATE, LEFT
- HPS - 1.2MM L PLATE, RIGHT
- HPS - 1.2MM L PLATE, RIGHT
- HPS - 1.2MM L PLATE, RIGHT
- HPS - 1.2MM OFFSET GRID PLATE, RIGHT
- HPS - 1.2MM OFFSET GRID PLATE, RIGHT
- HPS - 1.2MM X 10MM FULLY THREADED SCREW
- HPS - 1.2MM X 10MM LAG SCREW
- HPS - 1.2MM X 11MM FULLY THREADED SCREW
- HPS - 1.2MM X 11MM LAG SCREW
- HPS - 1.2MM X 12MM FULLY THREADED SCREW
- HPS - 1.2MM X 12MM LAG SCREW
- HPS - 1.2MM X 13MM FULLY THREADED SCREW
- HPS - 1.2MM X 13MM LAG SCREW
- HPS - 1.2MM X 14MM FULLY THREADED SCREW
- HPS - 1.2MM X 14MM LAG SCREW
- HPS - 1.2MM X 16MM FULLY THREADED SCREW
- HPS - 1.2MM X 16MM LAG SCREW
- HPS - 1.2MM X 18MM FULLY THREADED SCREW
- HPS - 1.2MM X 18MM LAG SCREW
- HPS - 1.2MM X 4MM FULLY THREADED SCREW
- HPS - 1.2MM X 5MM FULLY THREADED SCREW
- HPS - 1.2MM X 6MM FULLY THREADED SCREW
- HPS - 1.2MM X 6MM LAG SCREW
- HPS - 1.2MM X 7MM FULLY THREADED SCREW
- HPS - 1.2MM X 7MM LAG SCREW
- HPS - 1.2MM X 8MM FULLY THREADED SCREW
- HPS - 1.2MM X 9MM FULLY THREADED SCREW
- HPS - 1.2MM X 9MM LAG SCREW
- HPS - 1.2MM/1.6MM COUNTERSINK, MANUAL
- HPS - 1.2MM/1.6MM PLATE HOLDING TAK
- HPS - 1.2MM/1.6MM SCREW DEPTH GAUGE
- HPS - 1.3MM DRILL, J-LATCH
- HPS - 1.3MM DRILL, MANUAL
- HPS - 1.3MM DRILL, OSTEOPOWER
- HPS - 1.5 MM DRILL, J-LATCH
- HPS - 1.5MM DRILL, MANUAL
- HPS - 1.5MM DRILL, OSTEOPOWER
- HPS - 1.6 MM X 10MM LAG SCREW
- HPS - 1.6MM 3 X 8 T PLATE, LOCKING
- HPS - 1.6MM 3 X 8 T PLATE, LOCKING
- HPS - 1.6MM 4 X 8 T PLATE, LOCKING
- HPS - 1.6MM 4 X 8 T PLATE, LOCKING
- HPS - 1.6MM CONDYLAR PLATE, LEFT, LOCKING
- HPS - 1.6MM CONDYLAR PLATE, LEFT, LOCKING
- HPS - 1.6MM CONDYLAR PLATE, LEFT, LOCKING
- HPS - 1.6MM CONDYLAR PLATE, RIGHT LOCKING
- HPS - 1.6MM CONDYLAR PLATE, RIGHT LOCKING
- HPS - 1.6MM DRILL GUIDE INSERT
- HPS - 1.6MM DRILL, J-LATCH
- HPS - 1.6MM DRILL, MANUAL
- HPS - 1.6MM DRILL, OSTEOPOWER
- HPS - 1.6MM GRID OFFSET PLATE, RIGHT LOCKING
- HPS - 1.6MM GRID OFFSET PLATE, RIGHT LOCKING
- HPS - 1.6MM L PLATE, LEFT LOCKING
- HPS - 1.6MM L PLATE, LEFT LOCKING
- HPS - 1.6MM L PLATE, RIGHT LOCKING
- HPS - 1.6MM L PLATE, RIGHT LOCKING
- HPS - 1.6MM OFFSET GRID PLATE, LEFT, LOCKING
- HPS - 1.6MM OFFSET GRID PLATE, LEFT, LOCKING
- HPS - 1.6MM X 10MM FULLY THREADED SCREW
- HPS - 1.6MM X 10MM FULLY THREADED SCREW, LOCKING ANGLED
- HPS - 1.6MM X 11MM FULLY THREADED SCREW
- HPS - 1.6MM X 11MM FULLY THREADED SCREW, LOCKING ANGLED
- HPS - 1.6MM X 11MM LAG SCREW
- HPS - 1.6MM X 12MM FULLY THREADED SCREW
- HPS - 1.6MM X 12MM FULLY THREADED SCREW, LOCKING ANGLED
- HPS - 1.6MM X 12MM LAG SCREW
- HPS - 1.6MM X 13MM FULLY THREADED SCREW
- HPS - 1.6MM X 13MM FULLY THREADED SCREW, LOCKING ANGLED
- HPS - 1.6MM X 13MM LAG SCREW
- HPS - 1.6MM X 14MM FULLY THREADED SCREW
- HPS - 1.6MM X 14MM FULLY THREADED SCREW, LOCKING ANGLED
- HPS - 1.6MM X 14MM LAG SCREW
- HPS - 1.6MM X 16MM FULLY THREADED SCREW
- HPS - 1.6MM X 16MM FULLY THREADED SCREW, LOCKING ANGLED
- HPS - 1.6MM X 16MM LAG SCREW
- HPS - 1.6MM X 18MM FULLY THREADED SCREW
- HPS - 1.6MM X 18MM FULLY THREADED SCREW, LOCKING ANGLED
- HPS - 1.6MM X 20MM FULLY THREADED SCREW
- HPS - 1.6MM X 20MM FULLY THREADED SCREW, LOCKING ANGLED
- HPS - 1.6MM X 20MM LAG SCREW
- HPS - 1.6MM X 22MM FULLY THREADED SCREW
- HPS - 1.6MM X 22MM FULLY THREADED SCREW, LOCKING ANGLED
- HPS - 1.6MM X 22MM LAG SCREW
- HPS - 1.6MM X 24MM FULLY THREADED SCREW
- HPS - 1.6MM X 24MM FULLY THREADED SCREW, LOCKING ANGLED
- HPS - 1.6MM X 24MM LAG SCREW
- HPS - 1.6MM X 6MM FULLY THREADED SCREW
- HPS - 1.6MM X 6MM FULLY THREADED SCREW, LOCKING ANGLED
- HPS - 1.6MM X 6MM LAG SCREW
- HPS - 1.6MM X 7MM FULLY THREADED SCREW
- HPS - 1.6MM X 7MM FULLY THREADED SCREW, LOCKING ANGLED
- HPS - 1.6MM X 7MM LAG SCREW
- HPS - 1.6MM X 9MM FULLY THREADED SCREW
- HPS - 1.6MM X 9MM FULLY THREADED SCREW, LOCKING ANGLED
- HPS - 1.6MM X 9MM LAG SCREW
- HPS - 1.6MM X LAG SCREW 18MM
- HPS - 1.6MM Y PLATE, LOCKING
- HPS - 1.6MM Y PLATE, LOCKING
- HPS - 1.8MM X 18MM LOCKING PIN BUTTRESS
- HPS - 12 1.2MM HOLE PLATE STRAIGHT
- HPS - 12 1.2MM HOLE PLATE STRAIGHT
- HPS - 12 1.6MM STRAIGHT HOLE PLATE, LOCKING
- HPS - 12 1.6MM STRAIGHT HOLE PLATE, LOCKING
- HPS - 12 2.0MM STRAIGHT HOLE PLATE, LOCKING
- HPS - 12 2.0MM STRAIGHT HOLE PLATE, LOCKING
- HPS - 12 2.4MM STRAIGHT HOLE PLATE, LOCKING
- HPS - 12 2.4MM STRAIGHT HOLE PLATE, LOCKING
- HPS - 2.0 MM OFFSET GRID PLATE, LEFT, LOCKING
- HPS - 2.0 MM OFFSET GRID PLATE, LEFT, LOCKING
- HPS - 2.0 MM X 11MM FULLY THREADED SCREW
- HPS - 2.0 MM X 26MM FULLY THREADED SCREW, LOCKING ANGLED
- HPS - 2.0 MM X 36MM LAG SCREW
- HPS - 2.0 MM Y PLATE, LOCKING
- HPS - 2.0 MM Y PLATE, LOCKING
- HPS - 2.0 MM Z PLATE, LOCKING
- HPS - 2.0 MM Z PLATE, LOCKING
- HPS - 2.0/2.4/3.0/4.0MM CANNULATED DRILL GUIDE
- HPS - 2.0/2.4/3.0/4.0MM CANNULATED SCREW REMOVER
- HPS - 2.0/2.4MM CANNULATED DRILL, EXTRA LONG
- HPS - 2.0/2.4MM CANNULATED DRILL, LONG, QUICK RELEASE
- HPS - 2.0/2.4MM CANNULATED DRIVER HEADLESS, SHORT
- HPS - 2.0/2.4MM CANNULATED SCREW COUNTERSINK
- HPS - 2.0/2.4MM CANNULATED SHAFT SCREWDRIVER
- HPS - 2.0/2.4MM PROXIMAL CORTEX DRILL
- HPS - 2.0MM 2 X 8 T PLATE, LOCKING
- HPS - 2.0MM 2 X 8 T PLATE, LOCKING
- HPS - 2.0MM 3 X 8 T PLATE, LOCKING
- HPS - 2.0MM 3 X 8 T PLATE, LOCKING
- HPS - 2.0MM 6 STRAIGHT HOLE PLATE, LOCKING
- HPS - 2.0MM 6 STRAIGHT HOLE PLATE, LOCKING
- HPS - 2.0MM CONDYLAR PLATE, LEFT, LOCKING
- HPS - 2.0MM CONDYLAR PLATE, LEFT, LOCKING
- HPS - 2.0MM CONDYLAR PLATE, RIGHT LOCKING
- HPS - 2.0MM CONDYLAR PLATE, RIGHT LOCKING
- HPS - 2.0MM DRILL GUIDE INSERT
- HPS - 2.0MM DRILL, J-LATCH
- HPS - 2.0MM DRILL, MANUAL
- HPS - 2.0MM DRILL, OSTEOPOWER
- HPS - 2.0MM L PLATE, LEFT, LOCKING
- HPS - 2.0MM L PLATE, LEFT, LOCKING
- HPS - 2.0MM L PLATE, RIGHT LOCKING
- HPS - 2.0MM L PLATE, RIGHT LOCKING
- HPS - 2.0MM OFFSET GRID PLATE, RIGHT LOCKING
- HPS - 2.0MM OFFSET GRID PLATE, RIGHT LOCKING
- HPS - 2.0MM SUBCONDYLAR PLATE, LOCKING
- HPS - 2.0MM SUBCONDYLAR PLATE, LOCKING
- HPS - 2.0MM X 10MM CANNULATED HEADLESS SCREW
- HPS - 2.0MM X 10MM CANNULATED LAG SCREW
- HPS - 2.0MM X 10MM FULLY THREADED SCREW
- HPS - 2.0MM X 10MM FULLY THREADED SCREW, LOCKING ANGLED
- HPS - 2.0MM X 10MM LAG SCREW
- HPS - 2.0MM X 11MM CANNULATED HEADLESS SCREW
- HPS - 2.0MM X 11MM CANNULATED LAG SCREW
- HPS - 2.0MM X 11MM FULLY THREADED SCREW, ANGLED LOCKING
- HPS - 2.0MM X 12MM CANNULATED LAG SCREW
- HPS - 2.0MM X 12MM FULLY THREADED SCREW
- HPS - 2.0MM X 12MM FULLY THREADED SCREW, LOCKING ANGLED
- HPS - 2.0MM X 12MM LAG SCREW
- HPS - 2.0MM X 13MM CANNULATED HEADLESS SCREW
- HPS - 2.0MM X 13MM CANNULATED LAG SCREW
- HPS - 2.0MM X 13MM FULLY THREADED SCREW
- HPS - 2.0MM X 13MM FULLY THREADED SCREW, LOCKING ANGLED
- HPS - 2.0MM X 13MM SCREW LAG
- HPS - 2.0MM X 14MM CANNULATED HEADLESS SCREW
- HPS - 2.0MM X 14MM CANNULATED LAG SCREW
- HPS - 2.0MM X 14MM FULLY THREADED SCREW
- HPS - 2.0MM X 14MM FULLY THREADED SCREW, LOCKING ANGLED
- HPS - 2.0MM X 14MM LAG SCREW
- HPS - 2.0MM X 16MM CANNULATED HEADLESS SCREW
- HPS - 2.0MM X 16MM CANNULATED LAG SCREW
- HPS - 2.0MM X 16MM FULLY THREADED SCREW
- HPS - 2.0MM X 16MM FULLY THREADED SCREW, LOCKING ANGLED
- HPS - 2.0MM X 16MM LAG SCREW
- HPS - 2.0MM X 16MM LAG SCREW
- HPS - 2.0MM X 18MM CANNULATED HEADLESS SCREW
- HPS - 2.0MM X 18MM CANNULATED LAG SCREW
- HPS - 2.0MM X 18MM FULLY THREADED SCREW
- HPS - 2.0MM X 18MM FULLY THREADED SCREW, LOCKING ANGLED
- HPS - 2.0MM X 18MM LAG SCREW
- HPS - 2.0MM X 20MM CANNULATED HEADLESS SCREW
- HPS - 2.0MM X 20MM CANNULATED LAG SCREW
- HPS - 2.0MM X 20MM FULLY THREADED SCREW
- HPS - 2.0MM X 20MM FULLY THREADED SCREW, LOCKING ANGLED
- HPS - 2.0MM X 20MM LAG SCREW
- HPS - 2.0MM X 22MM CANNULATED HEADLESS SCREW
- HPS - 2.0MM X 22MM CANNULATED LAG SCREW
- HPS - 2.0MM X 22MM FULLY THREADED SCREW
- HPS - 2.0MM X 22MM FULLY THREADED SCREW, LOCKING ANGLED
- HPS - 2.0MM X 24MM CANNULATED HEADLESS SCREW
- HPS - 2.0MM X 24MM FULLY THREADED SCREW
- HPS - 2.0MM X 24MM FULLY THREADED SCREW, LOCKING ANGLED
- HPS - 2.0MM X 24MM LAG SCREW
- HPS - 2.0MM X 26MM CANNULATED HEADLESS SCREW
- HPS - 2.0MM X 26MM CANNULATED LAG SCREW
- HPS - 2.0MM X 26MM FULLY THREADED SCREW
- HPS - 2.0MM X 26MM LAG SCREW
- HPS - 2.0MM X 28MM CANNULATED HEADLESS SCREW
- HPS - 2.0MM X 28MM CANNULATED LAG SCREW
- HPS - 2.0MM X 28MM FULLY THREADED SCREW
- HPS - 2.0MM X 28MM FULLY THREADED SCREW, LOCKING ANGLED
- HPS - 2.0MM X 28MM LAG SCREW
- HPS - 2.0MM X 30MM CANNULATED HEADLESS SCREW
- HPS - 2.0MM X 30MM CANNULATED LAG SCREW
- HPS - 2.0MM X 30MM FULLY THREADED SCREW
- HPS - 2.0MM X 30MM FULLY THREADED SCREW, LOCKING ANGLED
- HPS - 2.0MM X 30MM LAG SCREW
- HPS - 2.0MM X 32MM CANNULATED HEADLESS SCREW
- HPS - 2.0MM X 32MM CANNULATED LAG SCREW
- HPS - 2.0MM X 32MM FULLY THREADED SCREW
- HPS - 2.0MM X 32MM FULLY THREADED SCREW, LOCKING ANGLED
- HPS - 2.0MM X 32MM LAG SCREW
- HPS - 2.0MM X 34MM CANNULATED HEADLESS SCREW
- HPS - 2.0MM X 34MM CANNULATED LAG SCREW
- HPS - 2.0MM X 34MM FULLY THREADED SCREW
- HPS - 2.0MM X 34MM FULLY THREADED SCREW, LOCKING ANGLED
- HPS - 2.0MM X 34MM LAG SCREW
- HPS - 2.0MM X 36MM CANNULATED HEADLESS SCREW
- HPS - 2.0MM X 36MM CANNULATED LAG SCREW
- HPS - 2.0MM X 36MM FULLY THREADED SCREW
- HPS - 2.0MM X 36MM FULLY THREADED SCREW, LOCKING ANGLED
- HPS - 2.0MM X 6MM CANNULATED LAG SCREW
- HPS - 2.0MM X 6MM FULLY THREADED SCREW
- HPS - 2.0MM X 6MM FULLY THREADED SCREW, LOCKING ANGLED
- HPS - 2.0MM X 6MM LAG SCREW
- HPS - 2.0MM X 7MM CANNULATED LAG SCREW
- HPS - 2.0MM X 7MM FULLY THREADED SCREW
- HPS - 2.0MM X 7MM FULLY THREADED SCREW , ANGLED LOCKING
- HPS - 2.0MM X 7MM LAG SCREW
- HPS - 2.0MM X 9MM CANNULATED LAG SCREW
- HPS - 2.0MM X 9MM FULLY THREADED SCREW
- HPS - 2.0MM X 9MM FULLY THREADED SCREW, LOCKING ANGLED
- HPS - 2.0MM X 9MM LAG SCREW
- HPS - 2.0MM X HEADLESS SCREW 12MM CANNULATED
- HPS - 2.0MM/2.4MM COUNTERSINK, MANUAL
- HPS - 2.0MM/2.4MM PLATE HOLDING TAK
- HPS - 2.0MM/2.4MM SCREW DEPTH GAUGE
- HPS - 2.4 MM X 10MM CANNULATED LAG SCREW
- HPS - 2.4 MM X 36MM FULLY THREADED SCREW, LOCKING ANGLED
- HPS - 2.4MM 2 X 8 T PLATE, LOCKING
- HPS - 2.4MM 2 X 8 T PLATE, LOCKING
- HPS - 2.4MM 3 X 8 T PLATE, LOCKING
- HPS - 2.4MM 3 X 8 T PLATE, LOCKING
- HPS - 2.4MM 6 STRAIGHT HOLE PLATE, LOCKING
- HPS - 2.4MM 6 STRAIGHT HOLE PLATE, LOCKING
- HPS - 2.4MM CONDYLAR PLATE, LEFT, LOCKING
- HPS - 2.4MM CONDYLAR PLATE, LEFT, LOCKING
- HPS - 2.4MM CONDYLAR PLATE, RIGHT LOCKING
- HPS - 2.4MM CONDYLAR PLATE, RIGHT LOCKING
- HPS - 2.4MM DRILL GUIDE INSERT
- HPS - 2.4MM DRILL, J-LATCH
- HPS - 2.4MM DRILL, MANUAL
- HPS - 2.4MM DRILL, OSTEOPOWER
- HPS - 2.4MM L PLATE, LOCKING, LEFT
- HPS - 2.4MM L PLATE, LOCKING, LEFT
- HPS - 2.4MM L PLATE, LOCKING, RIGHT
- HPS - 2.4MM L PLATE, LOCKING, RIGHT
- HPS - 2.4MM OFFSET GRID PLATE, LEFT, LOCKING
- HPS - 2.4MM OFFSET GRID PLATE, LEFT, LOCKING
- HPS - 2.4MM OFFSET GRID PLATE, RIGHT LOCKING
- HPS - 2.4MM OFFSET GRID PLATE, RIGHT LOCKING
- HPS - 2.4MM SUBCONDYLAR PLATE, LOCKING
- HPS - 2.4MM SUBCONDYLAR PLATE, LOCKING
- HPS - 2.4MM X 10MM CANNULATED HEADLESS SCREW
- HPS - 2.4MM X 10MM FULLY THREADED SCREW
- HPS - 2.4MM X 10MM FULLY THREADED SCREW
- HPS - 2.4MM X 10MM FULLY THREADED SCREW, LOCKING ANGLED
- HPS - 2.4MM X 10MM LAG SCREW
- HPS - 2.4MM X 11MM CANNULATED HEADLESS SCREW
- HPS - 2.4MM X 11MM CANNULATED LAG SCREW
- HPS - 2.4MM X 11MM FULLY THREADED SCREW, LOCKING ANGLED
- HPS - 2.4MM X 12MM CANNULATED HEADLESS SCREW
- HPS - 2.4MM X 12MM CANNULATED LAG SCREW
- HPS - 2.4MM X 12MM FULLY THREADED SCREW
- HPS - 2.4MM X 12MM FULLY THREADED SCREW , ANGLED LOCKING
- HPS - 2.4MM X 12MM LAG SCREW
- HPS - 2.4MM X 13MM CANNULATED HEADLESS SCREW
- HPS - 2.4MM X 13MM CANNULATED LAG SCREW
- HPS - 2.4MM X 13MM FULLY THREADED SCREW
- HPS - 2.4MM X 13MM FULLY THREADED SCREW, LOCKING ANGLED
- HPS - 2.4MM X 13MM LAG SCREW
- HPS - 2.4MM X 14MM CANNULATED HEADLESS SCREW
- HPS - 2.4MM X 14MM CANNULATED LAG SCREW
- HPS - 2.4MM X 14MM FULLY THREADED SCREW
- HPS - 2.4MM X 14MM FULLY THREADED SCREW, LOCKING ANGLED
- HPS - 2.4MM X 14MM LAG SCREW
- HPS - 2.4MM X 16MM CANNULATED HEADLESS SCREW
- HPS - 2.4MM X 16MM CANNULATED LAG SCREW
- HPS - 2.4MM X 16MM FULLY THREADED SCREW
- HPS - 2.4MM X 16MM FULLY THREADED SCREW, LOCKING ANGLED
- HPS - 2.4MM X 16MM LAG SCREW
- HPS - 2.4MM X 18MM CANNULATED HEADLESS SCREW
- HPS - 2.4MM X 18MM CANNULATED LAG SCREW
- HPS - 2.4MM X 18MM FULLY THREADED SCREW
- HPS - 2.4MM X 18MM FULLY THREADED SCREW, ANGLED LOCKING
- HPS - 2.4MM X 18MM LAG SCREW
- HPS - 2.4MM X 20MM CANNULATED HEADLESS SCREW
- HPS - 2.4MM X 20MM CANNULATED LAG SCREW
- HPS - 2.4MM X 20MM FULLY THREADED SCREW
- HPS - 2.4MM X 20MM FULLY THREADED SCREW, LOCKING ANGLED
- HPS - 2.4MM X 20MM LAG SCREW
- HPS - 2.4MM X 22MM CANNULATED HEADLESS SCREW
- HPS - 2.4MM X 22MM CANNULATED LAG SCREW
- HPS - 2.4MM X 22MM FULLY THREADED SCREW
- HPS - 2.4MM X 22MM FULLY THREADED SCREW, LOCKING ANGLED
- HPS - 2.4MM X 22MM LAG SCREW
- HPS - 2.4MM X 24MM CANNULATED HEADLESS SCREW
- HPS - 2.4MM X 24MM CANNULATED LAG SCREW
- HPS - 2.4MM X 24MM FULLY THREADED SCREW
- HPS - 2.4MM X 24MM FULLY THREADED SCREW, LOCKING ANGLED
- HPS - 2.4MM X 24MM LAG SCREW
- HPS - 2.4MM X 26MM CANNULATED HEADLESS SCREW
- HPS - 2.4MM X 26MM FULLY THREADED SCREW
- HPS - 2.4MM X 26MM FULLY THREADED SCREW, LOCKING ANGLED
- HPS - 2.4MM X 26MM LAG SCREW
- HPS - 2.4MM X 28MM CANNULATED HEADLESS SCREW
- HPS - 2.4MM X 28MM CANNULATED LAG SCREW
- HPS - 2.4MM X 28MM FULLY THREADED SCREW
- HPS - 2.4MM X 28MM FULLY THREADED SCREW, LOCKING ANGLED
- HPS - 2.4MM X 28MM LAG SCREW
- HPS - 2.4MM X 30MM CANNULATED HEADLESS SCREW
- HPS - 2.4MM X 30MM CANNULATED LAG SCREW
- HPS - 2.4MM X 30MM FULLY THREADED SCREW
- HPS - 2.4MM X 30MM FULLY THREADED SCREW, LOCKING ANGLED
- HPS - 2.4MM X 30MM LAG SCREW
- HPS - 2.4MM X 32MM CANNULATED HEADLESS SCREW
- HPS - 2.4MM X 32MM CANNULATED LAG SCREW
- HPS - 2.4MM X 32MM FULLY THREADED SCREW
- HPS - 2.4MM X 32MM FULLY THREADED SCREW, LOCKING ANGLED
- HPS - 2.4MM X 32MM LAG SCREW
- HPS - 2.4MM X 34MM CANNULATED HEADLESS SCREW
- HPS - 2.4MM X 34MM CANNULATED LAG SCREW
- HPS - 2.4MM X 34MM FULLY THREADED SCREW
- HPS - 2.4MM X 34MM FULLY THREADED SCREW, LOCKING ANGLED
- HPS - 2.4MM X 34MM LAG SCREW
- HPS - 2.4MM X 36MM CANNULATED HEADLESS SCREW
- HPS - 2.4MM X 36MM CANNULATED LAG SCREW
- HPS - 2.4MM X 36MM FULLY THREADED SCREW
- HPS - 2.4MM X 36MM LAG SCREW
- HPS - 2.4MM X 6MM CANNULATED LAG SCREW
- HPS - 2.4MM X 6MM FULLY THREADED SCREW
- HPS - 2.4MM X 6MM FULLY THREADED SCREW, LOCKING ANGLED
- HPS - 2.4MM X 6MM LAG SCREW
- HPS - 2.4MM X 7MM CANNULATED LAG SCREW
- HPS - 2.4MM X 7MM FULLY THREADED SCREW
- HPS - 2.4MM X 7MM FULLY THREADED SCREW, LOCKING ANGLED
- HPS - 2.4MM X 7MM LAG SCREW
- HPS - 2.4MM X 9MM CANNULATED LAG SCREW
- HPS - 2.4MM X 9MM FULLY THREADED SCREW
- HPS - 2.4MM X 9MM FULLY THREADED SCREW, LOCKING ANGLED
- HPS - 2.4MM X 9MM LAG SCREW
- HPS - 2.4MM X LAG SCREW 11MM
- HPS - 2.4MM Y PLATE, LOCKING
- HPS - 2.4MM Y PLATE, LOCKING
- HPS - 2.4MM Z PLATE, LOCKING
- HPS - 2.4MM Z PLATE, LOCKING
- HPS - 3.0/4.0MM CANNULATED DRILL
- HPS - 3.0/4.0MM CANNULATED DRILL, QUICK RELEASE
- HPS - 3.0/4.0MM CANNULATED DRIVER HEADLESS, SHORT
- HPS - 3.0/4.0MM PROXIMAL CORTEX DRILL
- HPS - 3.0MM X 10MM CANNULATED HEADLESS SCREW
- HPS - 3.0MM X 12MM CANNULATED HEADLESS SCREW
- HPS - 3.0MM X 13MM CANNULATED HEADLESS SCREW
- HPS - 3.0MM X 14MM CANNULATED HEADLESS SCREW
- HPS - 3.0MM X 16MM CANNULATED HEADLESS SCREW
- HPS - 3.0MM X 18MM CANNULATED HEADLESS SCREW
- HPS - 3.0MM X 20MM CANNULATED HEADLESS SCREW
- HPS - 3.0MM X 22MM CANNULATED HEADLESS SCREW
- HPS - 3.0MM X 24MM CANNULATED HEADLESS SCREW
- HPS - 3.0MM X 26MM CANNULATED HEADLESS SCREW
- HPS - 3.0MM X 28MM CANNULATED HEADLESS SCREW
- HPS - 3.0MM X 32MM CANNULATED HEADLESS SCREW
- HPS - 3.0MM X 34MM CANNULATED HEADLESS SCREW
- HPS - 3.0MM X 36MM CANNULATED HEADLESS SCREW
- HPS - 3.0MM X HEADLESS SCREW 11MM CANNULATED
- HPS - 3.0MM X HEADLESS SCREW 30MM CANNULATED
- HPS - 3MM PERIOSTEAL ELEVATOR, CURVED EDGE
- HPS - 3MM PERIOSTEAL ELEVATOR, STRAIGHT EDGE
- HPS - 4 2.0MM HOLE STRAIGHT LCDCP
- HPS - 4 2.0MM HOLE STRAIGHT LCDCP
- HPS - 4 2.4MM HOLE STRAIGHT LCDCP
- HPS - 4 2.4MM HOLE STRAIGHT LCDCP
- HPS - 6 1.2MM HOLE PLATE STRAIGHT
- HPS - 6 1.2MM HOLE PLATE STRAIGHT
- HPS - 6 HOLE 1.6MM STRAIGHT PLATE, LOCKING
- HPS - 6 HOLE 1.6MM STRAIGHT PLATE, LOCKING
- HPS - 6 HOLE 2.0MM STRAIGHT LCDCP
- HPS - 6 HOLE 2.0MM STRAIGHT LCDCP
- HPS - 6 HOLE 2.4MM STRAIGHT LCDCP
- HPS - 6 HOLE 2.4MM STRAIGHT LCDCP
- HPS - 6MM HOHMANN RETRACTOR
- HPS - 8 2.0MM HOLE STRAIGHT LCDCP
- HPS - 8 2.0MM HOLE STRAIGHT LCDCP
- HPS - 8 2.4MM HOLE STRAIGHT LCDCP
- HPS - 8 2.4MM HOLE STRAIGHT LCDCP
- HPS - 8MM HOHMANN RETRACTOR
- HPS - 8MM X 1.2MM LAG SCREW
- HPS - 8MM X 1.6MM FULLY THREADED SCREW
- HPS - 8MM X 1.6MM LAG SCREW
- HPS - 8MM X 2.0MM CANNULATED LAG SCREW
- HPS - 8MM X 2.0MM FULLY THREADED SCREW
- HPS - 8MM X 2.0MM LAG SCREW
- HPS - 8MM X 2.4MM CANNULATED LAG SCREW
- HPS - 8MM X 2.4MM FULLY THREADED SCREW
- HPS - 8MM X 2.4MM FULLY THREADED SCREW, LOCKING ANGLED
- HPS - 8MM X 2.4MM LAG SCREW
- HPS - CANNULATED DEPTH GAUGE 4 INCH
- HPS - FULLY THREADED SCREW 1.2MM DRILL GUIDE
- HPS - FULLY THREADED SCREW 1.6MM DRILL GUIDE
- HPS - FULLY THREADED SCREW 2.0MM DRILL GUIDE
- HPS - FULLY THREADED SCREW 2.4MM DRILL GUIDE
- HPS - FULLY THREADED SCREW 8MM X 1.6MM, ANGLED LOCKING
- HPS - FULLY THREADED SCREW 8MM X 2.0MM, ANGLED LOCKING
- HPS - HPS & 1.2MM SCREW PLATE MODULE
- HPS - HPS & 1.6MM SCREW PLATE MODULE
- HPS - HPS & 2.0MM SCREW PLATE MODULE
- HPS - HPS & 2.4MM SCREW PLATE MODULE
- HPS - HPS CANNULATED SCREW MODULE
- HPS - HPS INSTRUMENT TRAY
- HPS - LAG SCREW 2.0MM X 11MM
- HPS - LAG SCREW 2.0MM X 24MM CANNULATED
- HPS - LAG SCREW 2.4MM X 26MM CANNULATED
- HPS - ON BONE PLATE HOLDER
- HPS - PLATE 1.6MM SUBCONDYLAR
- HPS - PLATE 1.6MM SUBCONDYLAR
- HPS - PLATE BENDER
- HPS - PLATE HOLDING FORCEPS, SWIVEL FOOT
- HPS - RATCHET SCREWDRIVER HANDLE
- HPS - REDUCTION FORCEPS
- HPS - REDUCTION FORCEPS, K-WIRE GUIDE
- HPS - SCREWDRIVER 1.2MM SHAFT, MANUAL
- HPS - SCREWDRIVER 1.2MM SLEEVE
- HPS - SCREWDRIVER 1.6MM SHAFT, MANUAL
- HPS - SCREWDRIVER 1.6MM SLEEVE
- HPS - SCREWDRIVER 2.0MM SHAFT, MANUAL
- HPS - SCREWDRIVER 2.0MM SLEEVE
- HPS - SCREWDRIVER 2.4MM SHAFT, MANUAL
- HPS - SCREWDRIVER SLEEVE 2.4MM
- HPS - SHARP HOOK
- HPS - SMALL GRASPING FORCEPS
- HPS - SWIVEL HANDLE SCREWDRIVER
- HPS - TERMITE FORCEPS
- HPS - TRI-LOBE DRIVER SOLID CORE, SHORT, 2.0/2.4MM HEADLESS
- HPS - TRI-LOBE DRIVER SOLID CORE, SHORT, 3.0/4.0MM HEADLESS
- HPS - UNIVERSAL PLATE CUTTER
- HPS - Y PLATE 1.2MM
- HPS - Y PLATE 1.2MM
- HPS FUSION HAND SCREW & PLATE MODULE
- HPS TWO INSTRUMENT TRAY